This paper presents the results of the study on the development of a methodology for the production of pure amorphous silicon dioxide containing up to 99.8 wt.% of SiO2. As a starting material, a silica gel with a moisture content of up to 55 wt.% and an SiO2/AlF3 ratio of 4 was used. The silica gel was purified using alkaline and acidic solutions in concentrations ranging from 0.1 to 25 wt.%. The analysis of the experimental data allowed to identify the most suitable purification parameters of the starting material. The initial silica gel and the reaction products were studied using the methods of X-ray fluorescence, X-ray phase analysis, electron scanning microscopy, EDS microanalysis, and particle-size analysis. Amorphous silicon dioxide obtained according to the methodology developed by the authors forms agglomerates of spherical silicon dioxide particles up to 1 μm in size. Amorphous silicon dioxide was involved in the preparation of catalyst supports in order to consider the possibility of replacing part of the expensive raw material in the form of aluminum hydroxide. In the work, the characteristics of the addition of this amorphous silicon dioxide and the supports obtained from the traditionally used raw materials were evaluated.
This paper describes the results of thermal analysis of aluminium hydroxides that are most commonly used in the production of alumina and catalyst supports. The aluminium hydroxides contained an amorphous phase, boehmite, bayerite, pseudoboehmite, and gibbsite. Analysis of the temperature ranges of phase transformations was based on thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The proposed optimized graphical method for thermogram processing expands the range of parameters determined in aluminum hydroxide samples. The results of the conducted analytical study provide a more accurate ground for analyzing not only the crystalline phases but also the amorphous phase in the studied samples, as well as the excess structural water, ammonium nitrate and humidity. Thermal decomposition of aluminum hydroxide powder into oxides followed by reconstruction of the latter in an aqueous solution of (NH4)2CO3 leads to their selective reaction with the amorphous phase Al2O3 and the formation of NH4Al(OH)2CO3. Such sample preparation technique led to better accuracy when determining the amorphous phase in the samples by means of thermal analysis. Calibration thermograms were obtained by introducing known amounts of ammonium nitrate into the concentrated phase of microcrystalline boehmite through wet impregnation. Having processed them, the authors were able to propose a method for calculating the concentration of burning impurities in aluminium hydroxides. This research was carried out in the laboratory facilities provided by SPS Eurochim Ltd. from Saint Petersburg, Russia. The authors would like to thank professor Arkady Dykman, CEO of SPS Eurochim Ltd., Saint Petersburg, Russia, for providing laboratory equipment and materials for sample preparation.