Microplastics (MP) widely distributed in aquatic environments have adverse effects on aquatic organisms. Currently, the impact of MP on toxigenic red tide microalgae is poorly understood. In this study, the strain of Alexandrium pacificum ATHK, typically producing paralytic shellfish toxins (PST), was selected as the target. Effects of 1 and 0.1 μm polystyrene MP with three concentration gradients (5 mg L⁻¹, 25 mg L⁻¹ and 100 mg L⁻¹) on the growth, chlorophyll a (Chl a), photosynthetic activity (F_v/F_m) and PST production of ATHK were explored. Results showed that the high concentration (100 mg L⁻¹) of 1 μm and 0.1 μm MP significantly inhibited the growth of ATHK, and the inhibition depended on the size and concentration of MP. Contents of Chl a showed an increase with various degrees after MP exposure in all cases. The photosynthesis indicator F_v/F_m of ATHK was significantly inhibited in the first 11 days, then gradually returned to the level of control group at day 13, and finally was gradually inhibited in the 1 μm MP treatments, and promotion or inhibition to some degree also occurred at different periods after exposure to 0.1 μm MP. Overall, both particle sizes of MP at 5 and 25 mg L⁻¹ had no significant effect on cell toxin quota, and the high concentration 100 mg L⁻¹ significantly promoted the PST biosynthesis on the day 7, 11 and 15. No significant difference occurred in the cell toxin quota and the total toxin content in all treatments at the end of the experiment (day 21). All MP treatments did not change the toxin profiles of ATHK, nor did the relative molar percentage of main PST components. The growth of ATHK, Chl a content, F_v/F_m and toxin production were not affected by MP shading. This is the first report on the effects of MP on the PST-producing microalgae, which will improve the understanding of the adverse impact of MP on the growth and toxin production of A. pacificum.

Gymnodimine-A (GYM-A) is a fast-acting microalgal toxin and its production of certified materials requires an efficient harvesting technology from the large-scale cultures of toxigenic microalgae. In this study the recoveries of GYM-A were compared between several liquid-liquid extraction (LLE) treatments including solvents, ratios and stirring times to optimize the LLE technique for harvesting GYM-A from Karenia selliformis cultures, of which the dichloromethane was selected as the extractant and added to microalgal cultures at the ratio 55 mL L⁻¹ (5.5%, v/v). The recovery of GYM-A obtained by the LLE technique was also compared with filtration and centrifugation methods. The stability of GYM-A in culture media were also tested under different pH conditions. Results showed that both the conventional filter filtration and centrifugation methods led to fragmentation of microalgal cells and loss of GYM-A in the harvesting processes. A total of 5.1 µg of GYM-A were obtained from 2 L of K. selliformis cultures with a satisfactory recovery of 88%. Interestingly, GYM-A obviously degraded in the culture media with the initial pH 8.2 and the adjusted pH of 7.0 after 7 days, but there was no obvious degradation in the acidic medium at pH 5.0. Therefore, the LLE method developed here permits the collection of large-volume cultures of K. selliformis and the high-efficiency extraction of GYM-A. This work provides a simple and valuable technique for harvesting toxins from large-scale cultures of GYM-producing microalgae.

Gymnodimines (GYMs) are a group of fast-acting phycotoxins and their toxicological effects on human beings are still unclear due to the lack of sufficiently well-characterized large quantities of purified toxins for toxicology studies. In this study, a certified reference material (CRM) of GYM-A was prepared from the dinoflagellate Karenia selliformis, followed by multi-step chromatography separation and purification. Subsequently, the stability of GYM-A in methanolic media was evaluated at different temperature (−20, 4, and 20 °C) and pH (3, 5, and 7) conditions for 8 months, and the conversion products of GYM-A were explored by liquid chromatography–high resolution mass spectrometry (LC-HRMS). The results show that the stability of GYM-A decreased with increasing temperature and pH values. The GYM-A was stable during storage at −20 °C regardless of pH, but it decreased rapidly (81.8% ± 9.3%) at 20 °C in pH 7 solution after 8 months. Moreover, the concentrations of GYM-A did not significantly change at all temperatures in solutions with pH 3 (p > 0.05). It is recommended that GYM-A should be stored at low temperature (≤−20 °C) and pH (≤3) conditions for long-term storage in aqueous methanolic media. In addition, two conversion products of GYM-A, tentatively named as GYM-K (m/z 540) and GYM-L (m/z 524), were identified in the samples stored at high levels of pH and temperature. Based on the LC-HRMS data, the hypothetical chemical structures of both converting derivatives were proposed. A useful strategy for long-term storage of GYM-A CRM in aqueous methanolic media was suggested and two hypothesized conversion products of GYM-A were discovered in this study.