Hydrogen (H2) produced from renewables will have a growing impact on the global energy dynamics towards sustainable and carbon‐neutral standards. The share of green H2 is still too low to meet the net‐zero target, while the demand for high‐quality hydrogen continues to rise. These factors amplify the need for economically viable H2 generation technologies. The present article aims at evaluating the existing technologies for high‐quality H2 production based on solar energy. Technologies such as water electrolysis, photoelectrochemical and solar thermochemical water splitting, liquid metal reactors and plasma conversion utilize solar power directly or indirectly (as carbon‐neutral electrons) and are reviewed from the perspective of their current development level, technical limitations and future potential.
Hydrogen is not only an important industrial chemical but also an energy carrier with increasing demand. However, the current production techniques are based on technologies that result in massive CO2 emissions. In contrast, the pyrolysis of alkanes in a liquid metal bubble column reactor does not lead to direct CO2 emissions. In order to transfer this technology from lab-scale to industrial applications, it has to be scaled up and the influences of the most common constituent of natural gas on the pyrolysis process have to be determined. For this study, the liquid metal bubble column technology developed at the KIT was scaled up by a factor of 3.75, referred to as the reactor volume. In this article, the experimental setup containing the reactor is described in detail. In addition, new methods for the evaluation of experimental data will be presented. The reactor, as well as the experimental results from pure methane pyrolysis (PM), will be compared to the previous generation of reactors in terms of methane conversion. It could be proven that scaling up the reactor volume did not result in a decrease in methane conversion. For part II of this publication, methane-ethane (MEM) gas mixtures and high calorific natural gas (nGH) were pyrolyzed, and the results were discussed on the basis of the present part I.
This contribution presents the results of continued investigations on the production of hydrogen by means of pyrolysis in a liquid metal bubble column reactor, as developed at the Karlsruhe Institute of Technology in recent years. Part I of this contribution described the motivation and the methodology of this study, as well as a significant scale-up, and discussed its results for pure methane pyrolysis. Here in part II, two additional experimental campaigns with methane–ethane mixtures (MEMs) and high-calorific natural gas (nGH) will be presented and discussed for the first time, using the up-scaled liquid metal bubble column reactor. It could be proven that an MEM as the feed gas led to an increase in methane conversion at low temperatures, which is consistent with the literature data. The nGH pyrolysis confirms this trend and also results in a significant rise in methane conversion compared to pure methane pyrolysis. Furthermore, the nGH pyrolysis leads to an increased methane conversion even at higher temperatures compared to MEM pyrolysis. Additionally, both MEM and nGH pyrolysis also showed a shift in the formation of by-products toward lower temperatures.
Wakes appearing downstream of disturbances on the surface of a water flow in a concave open channel were examined experimentally. The investigated channel geometry was similar to the liquid lithium target in DONES (Demonstration fusion power plant Oriented NEutron Source). The objective of the measurements was to analyze the effect of a disturbance on the downstream layer thickness. For measuring the height profiles in the channel, an optical measurement system based on laser triangulation was developed. It was shown that the wake of the undisturbed flow emerged from the nozzle corner, which was in accordance with analytical solutions. For sufficiently large disturbances at the nozzle edge, the height profiles located downstream showed symmetrical minima and maxima on both sides of the disturbance. The wake depth strongly depended on the diameter and penetration depth of the disturbance, as well as the circumferential position in the channel, which yields to a critical wake depth of one millimeter for the lithium target in DONES.
6 December 2023 in International Journal of Energy Research
Dry reforming of methane (DRM) has attracted great interest for the production of syngas and/or hydrogen in a more environmentally friendly way. It is especially advantageous in this case to use biogasas a mixture of methane, CO2, and traces of further gasesas a feedstock replacement for natural gas. Nevertheless, industrial implementation of DRM is currently limited because of its inherent process restrictions. The biggest challenge of dry reforming is the deposition of carbon on the catalyst, known as coking. The focus of this theoretical study is to evaluate the feasibility of a biogas dry reforming process in a liquid metal (Sn) bubble column reactor. This technology has already been proven suitable for methane pyrolysis to obtain hydrogen, preventing issues related to reactor clogging or catalyst deactivation caused by carbon deposition. Results show that at high operating temperatures and atmospheric pressure, a product gas primarily composed of H2 and CO would be obtained. CO2 and water vapor may also be present in the final product depending on the operating conditions. The molten tin inside the reactor would, according to the presented theoretical considerations, not be affected by the formation of carbides and oxides. Additionally, the syngas composition (the H2:CO ratio) could be adjusted by using different CH4:CO2 feed ratios.
Wasserstoff (H2) aus erneuerbaren Energien wird einen wachsenden Einfluss auf die globale Energiedynamik hin zu nachhaltigen und kohlenstoffneutralen Standards haben. Der Anteil von grünem H2 ist noch zu gering, um das Netto‐Null‐Ziel zu erreichen, während die Nachfrage nach hochwertigem Wasserstoff weiter steigt. Diese Faktoren verstärken den Bedarf an wirtschaftlich tragfähigen H2‐Erzeugungstechnologien. Der vorliegende Artikel zielt darauf ab, die bestehenden Technologien zur Erzeugung von hochwertigem H2 auf der Grundlage von Solarenergie zu bewerten. Technologien wie die Wasserelektrolyse, die photoelektrochemische und die solare thermochemische Wasserspaltung, Flüssigmetallreaktoren und die Plasmakonversion nutzen die Sonnenenergie direkt oder indirekt (als kohlenstoffneutrale Elektronen) und werden im Hinblick auf ihren derzeitigen Entwicklungsstand, ihre technischen Grenzen und ihr Zukunftspotenzial untersucht.
About Me
senior scientist at Karlsruhe Institute of Technology
senior scientist at Karlsruhe Institute of Technology