Daria Linkova

Mrs. Daria Linkova

Privolzhsky Research Medical University, Nizhny Novgorod, Russia
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 August 2022 in Cells
Verified
Journal Article
Open access
PDF file
Daria LinkovaDaria Linkova
Daria Linkova
Yulia Pavlovna RubtsovaYulia Pavlovna Rubtsova
Yulia Pavlovna Rubtsova
MEMarfa Egorikhina
Marfa Egorikhina
Mesenchymal stem cells (MSCs) manifest vast opportunities for clinical use due both to their ability for self-renewal and for effecting paracrine therapeutic benefits. At the same time, difficulties with non-recurrent generation of large numbers of cells due to the necessity for long-term MSC expansion ex vivo, or the requirement for repeated sampling of biological material from a patient significantly limits the current use of MSCs in clinical practice. One solution to these problems entails the creation of a biobank using cell cryopreservation technology. This review is aimed at analyzing and classifying literature data related to the development of protocols for the cryopreservation of various types of MSCs and tissue-engineered structures. The materials in the review show that the existing techniques and protocols for MSC cryopreservation are very diverse, which significantly complicates standardization of the entire process. Here, the selection of cryoprotectors and of cryoprotective media shows the greatest variability. Currently, it is the cryopreservation of cell suspensions that has been studied most extensively, whereas there are very few studies in the literature on the freezing of intact tissues or of tissue-engineered structures. However, even now it is possible to develop general recommendations to optimize the cryopreservation process, making it less traumatic for cells.

10 October 2021 in Polymers
Verified
Journal Article
Open access
PDF file
MEMarfa Egorikhina
Marfa Egorikhina
IKIrina I. Kobyakova
Irina I. Kobyakova
Yulia Pavlovna RubtsovaYulia Pavlovna Rubtsova
Yulia Pavlovna Rubtsova
ICIrina N. Charykova
Irina N. Charykova
MBMarina Bugrova
Marina Bugrova
DADiana Ya. Aleynik
Diana Ya. Aleynik
The success of the regenerative process resulting from the implantation of a scaffold or a tissue-engineered structure into damaged tissues depends on a series of factors, including, crucially, the biodegradability of the implanted materials. The selection of a scaffold with appropriate biodegradation characteristics allows for synchronization of the degradation of the construct with the processes involved in new tissue formation. Thus, it is extremely important to characterize the biodegradation properties of potential scaffold materials at the stage of in vitro studies. We have analyzed the biodegradation of hybrid fibrin–collagen scaffolds in both PBS solution and in trypsin solution and this has enabled us to describe the processes of both their passive and enzymatic degradation. It was found that the specific origin of the collagen used to form part of the hybrid scaffolds could have a significant effect on the nature of the biodegradation process. It was also established, during comparative studies of acellular scaffolds and scaffolds containing stem cells, that the cells, too, make a significant contribution to changes in the biodegradation and structural properties of such scaffolds. The study results also provided evidence indicating the dependency between the pre-cultivation period for the cellular scaffolds and the speed and extent of their subsequent biodegradation. Our discussion of results includes an attempt to explain the mechanisms of the changes found. We hope that the said results will make a significant contribution to the understanding of the processes affecting the differences in the biodegradation properties of hybrid, biopolymer, and hydrogel scaffolds.

29 March 2022 in Macromolecular Research
Verified
Journal Article
Closed access
PDF file
VRVictoria Rumyantseva
Victoria Rumyantseva
LSLudmila Semenycheva
Ludmila Semenycheva
MEMarfa Egorikhina
Marfa Egorikhina
ICIrina Charykova
Irina Charykova
Daria LinkovaDaria Linkova
Daria Linkova
ESEvgeny Suleimanov
Evgeny Suleimanov

2 June 2023 in Polymers
Verified
Journal Article
Open access
PDF file
VYVladimir Yudin
Vladimir Yudin
MSMargarita P. Shurygina
Margarita P. Shurygina
MEMarfa Egorikhina
Marfa Egorikhina
DADiana Ya. Aleynik
Diana Ya. Aleynik
Daria LinkovaDaria Linkova
Daria Linkova
SCSergey A. Chesnokov
Sergey A. Chesnokov
Porous polymer monoliths with thicknesses of 2 and 4 mm were obtained via polymerization of ethylene glycol dimethacrylate (EGDMA) under the influence visible-light irradiation in the presence of a 70 wt% 1-butanol porogenic agent and o-quinone photoinitiators. The o-quinones used were: 3,5-di-tret-butyl-benzoquinone-1,2 (35Q), 3,6-di-tret-butyl-benzoquinone-1,2 (36Q), camphorquinone (CQ), and 9,10-phenanthrenequinone (PQ). Porous monoliths were also synthesized from the same mixture but using 2,2′-azo-bis(iso-butyronitrile) (AIBN) at 100 °C instead o-quinones. According to the results of scanning electron microscopy, all the resulting samples were conglomerates of spherical, polymeric particles with pores between them. Use of mercury porometry showed that the interconnected pore systems of all the polymers were open. The average pore size, Dmod, in such polymers strongly depended on both the nature of the initiator and the method of initiation of polymerization. For polymers obtained in the presence of AIBN, the Dmod value was as low as 0.8 μm. For polymers obtained via photoinitiation in the presence of 36Q, 35Q, CQ, and PQ, the Dmod values were significantly greater, i.e., 9.9, 6.4, 3.6, and 3.7 μm, respectively. The compressive strength and Young’s modulus of the porous monoliths increased symbatically in the series PQ < CQ < 36Q < 35Q < AIBN with decreasing proportions of large pores (over 12 μm) in their polymer structures. The photopolymerization rate of the EGDMA and 1-butanol, 30:70 wt% mixture was maximal for PQ and minimal for 35Q. All polymers tested were non-cytotoxic. Based on the data from MTT testing, it can be noted that the polymers obtained via photoinitiation were characterized by their positive effect on the proliferative activity of human dermal fibroblasts. This makes them promising osteoplastic materials for clinical trials.

7 March 2023 in Polymers
Verified
Journal Article
Open access
PDF file
MEMarfa Egorikhina
Marfa Egorikhina
LTLidia B. Timofeeva
Lidia B. Timofeeva
Daria LinkovaDaria Linkova
Daria Linkova
Yulia Pavlovna RubtsovaYulia Pavlovna Rubtsova
Yulia Pavlovna Rubtsova
MBMarina Bugrova
Marina Bugrova
DADiana Ya. Aleynik
Diana Ya. Aleynik
One of the key and actively developing areas of regenerative medicine is tissue-engineering. There is no doubt that the use of tissue-engineering products can have a significant impact on the efficiency of repair of damaged tissues and organs. However, before being used in clinical practice, tissue-engineering products require thorough preclinical studies to confirm their safety and efficacy, both with in vitro models and in experimental animals. This paper presents preclinical studies of a tissue-engineered construct, based on a hydrogel biopolymer scaffold carrier (consisting of blood plasma cryoprecipitate and collagen) with encapsulated mesenchymal stem cells, to evaluate its biocompatibility in vivo. The results were analyzed using histomorphology and transmission electron microscopy. It was shown that when implanted into animal (rat) tissues, the implants were completely replaced by connective tissue components. We also confirmed that no acute inflammation occurred in response to the scaffold implantation. The observed processes of cell recruitment to the scaffold from the surrounding tissues, the active formation of collagen fibers and the absence of acute inflammation testified that the regeneration process was ongoing in the implantation area. Thus, the presented tissue-engineered construct shows promise for becoming an effective tool for regenerative medicine in the future and may be used, in particular, to repair soft tissues.

8 June 2023 in Polymers
Verified
Journal Article
Open access
PDF file
YKYulia L. Kuznetsova
Yulia L. Kuznetsova
KGKsenya Gushchina
Ksenya Gushchina
KSKarina Sustaeva
Karina Sustaeva
VRVictoria Rumyantseva
Victoria Rumyantseva
MEMarfa Egorikhina
Marfa Egorikhina
Lyudmila L. SemenychevaLyudmila L. Semenycheva
Lyudmila L. Semenycheva
Polymerization of methyl methacrylate (MMA) in aqueous collagen (Col) dispersion was studied in the presence of tributylborane (TBB) and p-quinone: 2,5-di-tert-butyl-p-benzoquinone (2,5-DTBQ), p-benzoquinone (BQ), duroquinone (DQ), and p-naphthoquinone (NQ). It was found that this system leads to the formation of a grafted cross-linked copolymer. The inhibitory effect of p-quinone determines the amount of unreacted monomer, homopolymer, and percentage of grafted poly(methyl methacrylate) (PMMA). The synthesis combines two approaches to form a grafted copolymer with a cross-linked structure—“grafting to” and “grafting from”. The resulting products exhibit biodegradation under the action of enzymes, do not have toxicity, and demonstrate a stimulating effect on cell growth. At the same time, the denaturation of collagen occurring at elevated temperatures does not impair the characteristics of copolymers. These results allow us to present the research as a scaffold chemical model. Comparison of the properties of the obtained copolymers helps to determine the optimal method for the synthesis of scaffold precursors—synthesis of a collagen and poly(methyl methacrylate) copolymer at 60 °C in a 1% acetic acid dispersion of fish collagen with a mass ratio of the components collagen:MMA:TBB:2,5-DTBQ equal to 1:1:0.015:0.25.