This article presents the experimental demonstration of a fully photonics-based heterodyne subterahertz (sub-THz) system for wireless communications. A p-i-n photodiode is used as a broadband transmitter to upconvert the signal to the sub-THz domain and a photoconductive antenna downconverts the received wave to an intermediate frequency around 3.7 GHz. The optical signals used for photomixing are extracted from two independent optical frequency combs with different repetition rates. The optical phase locking reduces the phase noise of the sub-THz signal, greatly improving the performance of the system when phase modulation formats are transmitted. The sub-THz carrier is tuned between 80 and 320 GHz in 40-GHz steps, showing a power variation of 21.8 dB. The phase noise at both ends of the communication link is analyzed and compared with the phase noise of the received signal with different wireless carriers. As a proof-of-concept, a 100-Mbit/s binary-phase-shift-keying signal is successfully transmitted over 80-, 120-, and 160-GHz carriers, achieving a bit error rate below 10 -5 in the first two cases. These results show the great potential of THz communications driven by photonics to cover an extensive portion of the THz range without relying on electronic components that limit the operating range of the system to a concrete frequency band.
A new type of bimodal contrast agent was made that is based on the self-quenching of indocyanine green (ICG) encapsulated in a biocompatible and biodegradable polymer shell. The increasing of a local ICG concentration that is necessary for the obtaining of self-quenching effect was achieved by freezing-induced loading and layer-by-layer assembly. As a result, an efficient photoacoustic(optoacoustic)/fluorescent contrast agent based on composite indocyanine green/polymer particles was successfully prepared and was characterized by fluorescence and photoacoustic(optoacoustic) tomography in vitro. This type of contrast agent holds good promise for clinical application owing to its high efficiency and biosafety.
An efficient electro-optical modulation has been demonstrated here by using an edge-plasmon mode specific for the hybrid plasmonic waveguide. Our approach addresses a major obstacle of the integrated microwave photonics caused by the polarization constraints of both active and passive components. In addition to subwavelength confinement, typical for surface plasmon polaritons, the edge-plasmon modes enable exact matching of the polarization requirements for silicon based input/output grating couplers, waveguides, and electro-optical modulators. A concept of the hybrid waveguide, implemented in a sandwichlike structure, implies a coupling of propagating plasmon modes with a waveguide mode. The vertically arranged sandwich includes a thin layer of epsilon-near-zero material (indium tin oxide) providing an efficient modulation at small length scales. Employed edge plasmons possess a mixed polarization state and can be excited with horizontally polarized waveguide modes. It allows the resulting modulator to work directly with efficient grating couplers and avoid using bulky and lossy polarization converters. A 3D optical model based on Maxwell equations combined with drift-diffusion semiconductor equations is developed. Numerically heavy computations involving the optimization of materials and geometry have been performed. Effective modes, stationary state field distribution, an extinction coefficient, optical losses, and charge transport properties are computed and analyzed. In addition to the polarization matching, the advantages of the proposed model include the compact planar geometry of the silicon waveguide, reduced active electric resistance and a relatively simple design, attractive for experimental realization.
This article presents the experimental demonstration of synchronization of two integrated semiconductor distributed Bragg reflector lasers, fabricated with a generic multiproject wafer platform, by means of injection locking. Substantial linewidth reduction and frequency stabilization of the lasers were shown during locking of the lasers to an optical frequency comb. Phase noise was measured for different injected powers and different laser cavities. For a generation of millimeter-wave signals up to 80 GHz, two lasers were simultaneously locked to the comb. Fine-tuning was performed by tuning the repetition rate of the comb and coarse-tuning was carried out by switching to another comb line. A suppression ratio of 37 dB was achieved for unwanted comb lines. The achieved signal purity, phase noise, and suppression of unwanted components demonstrate the viability of injection locking for the generation of high-quality signals at sub-THz and THz frequencies and with substantial tunability.
A metal-dielectric interface is usually modeled by a zero-width layer, where dielectric permittivity suffers a discontinuity jump. In reality, there is a narrow transition region, which includes an epsilon-near-zero (ENZ) layer. We show that due to a continuous dielectric function the dispersion of the surface plasmon is modified. The energy of the surface plasmon radiates through the ENZ layer, giving rise to additional radiative losses. Direct evidence of the effects related to the transition layer is given by the observation of plasmonic resonance in the presence of a strong electric field normal to the metal film. The electric field affects the electron density within the transition layer that leads to a measurable shift of the plasmonic resonance.