An extended and rigorous analysis of retrodirective cross-eye jamming in a radar system scenario is presented. This analysis removes the approximations that limit the validity of other analyses of cross-eye jamming. These results imply that under certain conditions, a monopulse radar system can be more easily deceived than suggested by conventional cross-eye analyses. Furthermore, the cross-eye jammer antenna patterns do not affect the induced monopulse error.
16 January 2012 in IEEE Transactions on Aerospace and Electronic Systems
The effect of platform skin return on retrodirective cross-eye jamming is analysed, allowing the parameters of a cross-eye jammer in the presence of skin return to be determined. The inherently unknown phase of the platform skin return is accounted for, and the effect of variations in jammer-to-signal ratio (JSR) is investigated. The widely-held, though unsubstantiated, view that a JSR of 20 dB is required for effective cross-eye jamming is found to be reasonable, though conservative.
20 August 2019 in International Journal of Wildland Fire
Early forest fire detection can effectively be achieved by systems of specialised tower-mounted cameras. With the aim of maximising system visibility of smoke above a prescribed region, the process of selecting multiple tower sites from a large number of potential site locations is a complex combinatorial optimisation problem. Historically, these systems have been planned by foresters and locals with intimate knowledge of the terrain rather than by computational optimisation tools. When entering vast new territories, however, such knowledge and expertise may not be available to system planners. A tower site-selection optimisation framework that may be used in such circumstances is described in this paper. Metaheuristics are used to determine candidate site layouts for an area in the Nelspruit region in South Africa currently monitored by the ForestWatch detection system. Visibility cover superior to that of the existing system in the region is achieved and obtained in several days, whereas traditional approaches normally require months of speculation and planning. Following the results presented here, the optimisation framework is earmarked for use in future ForestWatch system planning.
12 July 2011 in IEEE Transactions on Antennas and Propagation
A version of the iterative Fourier technique (IFT) for the design of thinned antenna arrays with weighted elements is presented. The structure of the algorithm means that it is well suited to the design of weighted thinned arrays with low current taper ratios (CTRs). A number of test problems from the literature are considered, and in each case, the IFT produces results with improved sidelobe level (SLL) at lower CTR.
9 November 2017 in IEEE Antennas and Wireless Propagation Letters
An efficient technique for modeling radar cross section magnitude responses versus frequency is presented. The technique is based on Gaussian process regression and makes it possible to significantly reduce the number of expensive computer simulations required to accurately resolve these responses. Examples of two missiles are used to evaluate the proposed technique. Average predictive normalized root-mean-square errors (RMSEs) of 1.24% and 1.63% were obtained, with the worst RMSE being less than 2.2%. These results were significantly better than results obtained with alternative techniques, including geometric theory of diffraction-based modeling and support vector regression.
7 August 2015 in IEEE Antennas and Wireless Propagation Letters
Cross-eye jammers are required to operate in their near-field regions, so path-length differences between the jammers comprising a multiloop retrodirective cross-eye jammer cannot be ignored. The effects of these path-length differences are investigated and are shown to be significant in realistic cross-eye jamming scenarios. Notably, path-length differences have the potential to cause a multiloop retrodirective cross-eye jammer to act as a beacon rather than a jammer when the path-length difference is approximately 180 ° .