In the natural marine environment, offshore floating wind turbines (OFWTs) inevitably experience yawed inflow conditions, which will make their aerodynamics more complicated than those experiencing uniform inflow conditions and difficult to understand. In the present study, the thrust characteristics of a wake-influenced OFWT under dynamic, static, and coupled yawed inflow conditions are investigated thoroughly. Analytical characterizations of yawed inflow and upstream wake are integrated into the blade element momentum (BEM) method to achieve the investigation. Based on this method, simulations by the FAST code have been conducted, and the results are analyzed. It is shown that the three inflow conditions have considerable influences on the thrust coefficient of the wind rotor or the normal force at the blade section, especially in the wake case where the downstream OFWT is located at a specific offset from the central line of a single upstream wake. In order to validate the analyses of simulation results, experimental tests by a set of dedicated apparatus are conducted. The comparison results are good, proving the reliability of simulation results. This work can provide some theoretical contributions to the aerodynamic design and control of OFWTs.
The Froude-scaled offshore floating wind turbine model is inevitably affected by the Reynolds number effect, making the model unable to correctly reproduce the thrust performance of the reference wind turbine (RWT). To solve this problem, an Xfoil-AirfoilPrep-Matlab (XAM) system and a wide tip speed ratio search method (WTSM) are proposed to design a wide tip speed ratio (TSR) thrust-match model blade. The XAM system is utilized to select the best airfoil for WTSM by calculating the lift and drag coefficients of several airfoils. The WTSM is utilized to optimize the blade chord and twist. It formalizes the blade chord and twist by polynomials and then optimizes the polynomial coefficients. The thrust coefficients construct the optimization object at different TSRs. For validating the effect of the redesigned blade, the thrust performance is compared to that of the RWT blade. In addition, the thrust performance of redesigned blade at different pitch angles is also calculated and compared to those of the RWT blade. Results show that the thrust performance of redesigned blade matches well with that of the RWT blade at 0 pitch angle, and it can also match the variations of that of the RWT blade at the other pitch angles well.
Floating offshore wind turbines (FOWTs) are crucial for harnessing deep-sea wind energy resources. However, existing studies on FOWTs have predominantly focused on standalone wind turbines, neglecting the wake effects from upstream turbines within the offshore wind farms, thereby leading to inaccurate analyses. This study developed a coupled dynamic analysis method integrating aerodynamics, hydrodynamics, and mooring dynamics, incorporating the upstream wake effects through a three-dimensional (3D) Gaussian wake model and a nonlinear lift line free vortex wake (LLFVW) model. The proposed method was validated through comparisons with experiments in the wave tank and on the equivalent mechanism by the scaled-down models. Dynamic responses in four upstream wake conditions, i.e., no-wake, central wake, lateral offset wake, and multi-wake conditions, were simulated. The results indicated that upstream wake effects exert a significant influence on the dynamic responses of the FOWTs. All the three wake conditions markedly reduced the vibration displacement, fore–aft and side-to-side moments due to velocity deficits. Compared to the central wake, the lateral offset wake exerted a more pronounced effect on the fluctuations in tower-top vibration acceleration, the variations in tower-base moment, and the fluctuations in platform pitch acceleration, thereby posing critical fatigue risks. In contrast, multi-wake effects are less pronounced under the studied configuration. These findings emphasize the necessity of avoiding lateral offset exposures in wind farm layout planning. The proposed framework offers a practical tool for wake-aware design and optimization of FOWTs arrays.
In engineering design for semi-submersible drilling platforms, it is necessary to improve anti-collision performance by optimizing the platform’s column’ structure. However, collision is usually analyzed through numerical analysis methods such as finite element analysis, which comes with high calculation costs. The genetic algorithm (GA) and other traditional optimization methods require massive numerical simulations, with unacceptable computational complexity. To address the above problems, a parallel efficient global optimization (EGO) multi-objective algorithm, based on hybrid criteria for the Kriging approximate model, is put forward in this paper. The proposed algorithm was validated through six typical multi-objective optimization test functions. The results show that it is superior to classic EGO, in terms of both optimization results and computational efficiency. Lastly, the hybrid criterion-based parallel EGO algorithm proposed in this paper was employed for the anti-collision, lightweight design of the column of the first ice zone semi-submersible drilling platform in China. It was found that the anti-collision capacity of the platform column rose by 11.9% and the structural weight declined by 2.7 t in the optimized design, suggesting obvious optimization effects with respect to the original design.