In engineering design for semi-submersible drilling platforms, it is necessary to improve anti-collision performance by optimizing the platform’s column’ structure. However, collision is usually analyzed through numerical analysis methods such as finite element analysis, which comes with high calculation costs. The genetic algorithm (GA) and other traditional optimization methods require massive numerical simulations, with unacceptable computational complexity. To address the above problems, a parallel efficient global optimization (EGO) multi-objective algorithm, based on hybrid criteria for the Kriging approximate model, is put forward in this paper. The proposed algorithm was validated through six typical multi-objective optimization test functions. The results show that it is superior to classic EGO, in terms of both optimization results and computational efficiency. Lastly, the hybrid criterion-based parallel EGO algorithm proposed in this paper was employed for the anti-collision, lightweight design of the column of the first ice zone semi-submersible drilling platform in China. It was found that the anti-collision capacity of the platform column rose by 11.9% and the structural weight declined by 2.7 t in the optimized design, suggesting obvious optimization effects with respect to the original design.
Accurate oil debris analysis and wear monitoring of a gearbox are essential to ensure its stable and reliable operation. Element types of wear debris and their changes in the lubrication oil of the gearbox can be monitored by spectral analysis. However, it is still difficult to identify wear parts of the gearbox due to the complex composition of elements of wear debris. An improved multi-variable grey prediction model by incorporating a multi-objective genetic algorithm (MOGA-GM(1, N)) is proposed to evaluate weight coefficients of element concentrations of wear debris in the lubrication oil of the gearbox. Moreover, a wear growth rate of each element in the lubrication oil is proposed as an index for oil debris analysis to analyze the multi-variable correlation between the common element of iron (Fe) and other related elements of wear parts of the gearbox. Oil debris analysis of the gearbox is conducted on optimal weight coefficients of related elements to the common element Fe using the MOGA-GM(1, N) model. Wear experiment results verify feasibility of the proposed oil debris analysis method.
This study develops and evaluates three complementary predictive modeling frameworks for gearbox oil temperature forecasting: Stochastic Differential Equation (SDE) modeling with iterative Markov correction, multi-objective genetic algorithm-enhanced grey modeling (MOGA-GM(1,N)), and multi-output Gaussian Process Regression (MO-GPR). The study used supervisory control and data acquisition (SCADA) data from a 1.5 MW wind turbine gearbox, comprising 14 temperature measurements spanning 789 operational hours. The SDE framework partitions temperature evolution into deterministic aging effects and stochastic environmental perturbations, achieving a fitting accuracy of 2.5% and testing accuracy of 8.0% after thirty iterative corrections. The MOGA-GM(1,N) approach optimizes weight coefficients through the dual objective of minimizing the posterior difference ratio and maximizing small error probability, attaining first-class accuracy classification (; ) while identifying mechanical loads and rotational speeds as dominant thermal drivers. MO-GPR demonstrates competitive performance with uncertainty quantification capabilities, achieving RMSE values of 2.51–7.48 depending on training SCADA data proportions. Comparative analysis shows that the iteratively refined SDE methodachieves the best prediction accuracy in this case study for continuous thermal trajectory forecasting, while MOGA-GM(1,N) excels at wear source diagnostics and operational factor analysis. The proposed framework addresses persistent challenges in wind turbine condition monitoring, including extreme nonlinearity, discontinuous data, and unpredictable thermal spikes. The results suggest potential for implementation in preventive maintenance systems, enabling timely intervention before critical thermal thresholds that precipitate component failure.