Lukas Dufner

Mr. Lukas Dufner

University of Stuttgart
+1
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 November 2021 in Materials
Verified
Journal Article
Open access
PDF file
Damian Stanislav NakoniecznyDamian Stanislav Nakonieczny
Damian Stanislav Nakonieczny
Frank KernFrank Kern
Frank Kern
LDLukas Dufner
Lukas Dufner
ADAgnieszka Dubiel
Agnieszka Dubiel
Magdalena Antonowicz-HüpschMagdalena Antonowicz-Hüpsch
Magdalena Antonowicz-Hüpsch
KMKrzysztof Matus
Krzysztof Matus
This paper describes the effect of calcination temperature on the phase composition, chemical composition, and morphology of ZrO2 and Al2O3 powders modified with 3-aminopropyltriethoxysilane (APTES). Both ceramic powders were modified by etching in piranha solution, neutralization in ammonia water, reaction with APTES, ultrasonication, and finally calcination at 250, 350, or 450 °C. The obtained modified powders were characterized using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, particle size distribution (PSD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM/EDS), and thermogravimetric analysis (TGA).

19 October 2021 in Materials
Verified
Journal Article
Open access
PDF file
Damian Stanislav NakoniecznyDamian Stanislav Nakonieczny
Damian Stanislav Nakonieczny
Frank KernFrank Kern
Frank Kern
LDLukas Dufner
Lukas Dufner
Magdalena Antonowicz-HüpschMagdalena Antonowicz-Hüpsch
Magdalena Antonowicz-Hüpsch
KMKrzysztof Matus
Krzysztof Matus
This work aimed to prepare a composite with a polyamide (PA) matrix and surface-modified ZrO2 or Al2O3 to be used as ceramic fillers (CFs). Those composites contained 30 wt.% ceramic powder to 70 wt.% polymer. Possible applications for this type of composite include bioengineering applications especially in the fields of dental prosthetics and orthopaedics. The ceramic fillers were subjected to chemical surface modification with Piranha Solution and suspension in 10 M sodium hydroxide and Si3N4 to achieve the highest possible surface development and to introduce additional functional groups. This was to improve the bonding between the CFs and the polymer matrix. Both CFs were examined for particle size distribution (PSD), functional groups (FTIR), chemical composition (XPS), phase composition (XRD), and morphology and chemical composition (SEM/EDS). Filaments were created from the powders prepared in this way and were then used for 3D FDM printing. Samples were subjected to mechanical tests (tensility, hardness) and soaking tests in a high-pressure autoclave in artificial saliva for 14, 21, and 29 days.

16 May 2023 in Catalysts
Verified
Journal Article
Open access
PDF file
LDLukas Dufner
Lukas Dufner
FOFelix Ott
Felix Ott
NONikolai Otto
Nikolai Otto
TLTom Lembcke
Tom Lembcke
Frank KernFrank Kern
Frank Kern
This study presents a simple and sustainable coating technology for the deposition of photocatalytic coatings based on titanium dioxide and geopolymers, which requires no thermal post-treatment. Titania powder P25, potassium silicate and a calcium aluminate-based hardener were dispersed in water and applied to aluminum substrates using a paintbrush, a roller and a spray gun. The coatings were air-dried for 12 h. The photocatalytic activities were tested via degradation of an aqueous methylene blue solution in a batch reactor under artificial UV-A light. The roller and the spray gun-based coatings yielded well-adhering coatings with high photocatalytic activity. Brushed coatings were inhomogeneous and unstable. The presented method of producing photocatalytic coatings is very simple to apply and does not require complex technologies or energy-intensive thermal treatments.

15 February 2023 in Bioengineering
Verified
Journal Article
Open access
PDF file
LDLukas Dufner
Lukas Dufner
BOBettina Oßwald
Bettina Oßwald
JEJan Eberspaecher
Jan Eberspaecher
BRBianca Riedel
Bianca Riedel
CKChiara Kling
Chiara Kling
Michael SeidenstueckerMichael Seidenstuecker
Michael Seidenstuecker
To enable rapid osteointegration in bioceramic implants and to give them osteoinductive properties, scaffolds with defined micro- and macroporosity are required. Pores or pore networks promote the integration of cells into the implant, facilitating the supply of nutrients and the removal of metabolic products. In this paper, scaffolds are created from ß-tricalciumphosphate (ß-TCP) and in a novel way, where both the micro- and macroporosity are adjusted simultaneously by the addition of pore-forming polymer particles. The particles used are 10–40 wt%, spherical polymer particles of polymethylmethacrylate (PMMA) (Ø = 5 µm) and alternatively polymethylsilsesquioxane (PMSQ) (Ø = 2 µm), added in the course of ß-TCP slurry preparation. The arrangement of hydrophobic polymer particles at the interface of air bubbles was incorporated during slurry preparation and foaming of the slurry. The foam structures remain after sintering and lead to the formation of macro-porosity in the scaffolds. Furthermore, decomposition of the polymer particles during thermal debindering results in the formation of an additional network of interconnecting micropores in the stabilizing structures. It is possible to adjust the porosity easily and quickly in a range of 1.2–140 μm with a relatively low organic fraction. The structures thus prepared showed no cytotoxicity nor negative effects on the biocompatibility.

18 April 2025 in Applied Water Science
Verified
Journal Article
Open access
PDF file
LDLukas Dufner
Lukas Dufner
PHPhilipp Hofmann
Philipp Hofmann
DDDaniel Dobslaw
Daniel Dobslaw
Frank KernFrank Kern
Frank Kern
In this study, the inactivation of various bacterial strains in a solar illuminated photocatalysis reactor with a titania photocatalyst dispersed in a geopolymer coating is studied. The modular reactor design consists of connected catalyst-coated open water carrying chutes. The cleaning efficiency of the process against chemical and biological water contaminants was evaluated by means of test series with methylene blue as a reference for chemical contamination and by studying the inactivation of the strains Escherichia coli, Bacillus subtilis, Pseudomonas fluorescens and an undefined mixed culture from the effluent of the secondary clarifier of a wastewater treatment plant as biological contaminants. Test series with methylene blue showed reduction efficiencies of 17–63% for non-catalyst-coated reference reactors and 55–99% for catalyst-coated reactors within 120–300 min of exposure to natural sunlight. Disinfection test series showed reduction efficiencies of 0.0–2.8 log units (without catalyst) and 0.0–4.4 log units (with catalyst) for mentioned bacteria and the mixed culture within 40–180 min of light exposure. Hence, the catalyst-coated system consistently showed a significantly higher degradation efficiency than the non-coated reference. A comparison of methylene blue degradation under natural solar irradiation and artificial UVA irradiation conditions showed that this simple reactor concept is suitable for the combined elimination of trace substances and disinfection of water even at moderate flux rates of 1000 W/m2.

6 May 2024 in Open Ceramics
Verified
Journal Article
Open access
LDLukas Dufner
Lukas Dufner
LALluc Aresté-Saló
Lluc Aresté-Saló
MGMoisès Graells
Moisès Graells
MPMontserrat Pérez-Moya
Montserrat Pérez-Moya
FKFrank Kern
Frank Kern
WRWolfgang Rheinheimer
Wolfgang Rheinheimer