The ability to guarantee reliable and damage-tolerant operation of structures is critical to their safe operation. Various non-destructive evaluation (NDE) techniques, such as ultrasonics, acoustic emission, thermography, acousto-ultrasonics (AU), among others could potentially provide a means of inspecting cracks, defects and damage responses in structures. The main aim of this study is to look into the physical problem of AU wave propagation through an isotropic plate and its analytical validation, using wave dispersion concept. The experimental investigation was conducted on aluminium Al6082-T6 alloy plate specimen. Wave propagation speed on top and bottom surfaces of the plate was investigated. The variation of the wave speed and attenuation with frequency were identified. From the results obtained experimentally, the wave dispersion was verified analytically. Interestingly, Lamb waves were discovered to be the dominating AU waves. The wave was appreciably non-dispersive in the frequency extent from 150 kHz to 1 MHz and the attenuation coefficient was increased with the frequency. This finding provides a significant breakthrough to the implementation of acousto- ultrasonics in the non- destructive testing applications, such as accessing the damage in composite structures, including wind turbine blades. AU has an active sensing mechanism, providing an edge over acoustic emission (AE) method which is a passive mode of damage sensing and detection, as external loading is needed for the damage sensing.
This study focused on quantitative damage severity assessment in composite materials using Acousto-Ultrasonics (AU), an in-service and active non-destructive inspection technique in which Lamb waves are communicated through a damaged zone. This was done by activating a signal onto the composite material surface and acquiring the received waves after their interactions with the damage. It relied on early research that presented a series of stress wave factors (SWFs) derived from the frequency-domain of the AU data, as quantitative identifiers of the received signal. Although, the SWFs have previously been proven to determine the understanding of the spatial arrangements of the impact damage, the degree or severity of the damage inside the impact damage area has not been assessed. Therefore, the current research was a step in the right way toward that aim. AU waves were generated via a laminate with increasing concentrations of ply faults, across longitudinal length. The stress wave factors were first examined for an undamaged composite, and the SWFs were then connected with the fault concentration. The significance of the found linkages and the possible futures of quantitative assessment of the degree of damage by such relationships were examined. The stress wave factors showed clear and consistent patterns, as the fault concentration increased. With a rise in fault density, an element measuring the energy content of the waves significantly changed with R-sq(adj) = 91.33% and almost linearly, and provided a robust measurable trend, while other parameter exhibited lesser shifts with R-sq(adj) = 51.86%. The result obtained from the presented work provided a base to cost-effective and in-service measure to early detection of catastrophic failures in composite structures, including the wind turbine blades for renewable and sustainable energy generation.
This study presents an approach to quantifying impact-induced damage severity in composites, focusing on synthetic carbon fibre reinforced polymer (CFRP), natural flax fibre reinforced polymer (FFRP) and hybrid fibres reinforced polymer (HFRP) composite of carbon and flax. The investigation aims to quantitatively characterise impact damage under energies ranging from 10 to 70 J through acousto-ultrasonics (AU) testing, proposing an efficient technique for evaluating the integrity of various FRP composites under in-service conditions. AU testing was performed at azimuthal angles of 0°, 30°, 45°, 60° and 90°, utilising acousto-ultrasonic waveform indices (AUWIs), such as wave velocity, peak amplitude, energy content, centroid frequency and skewness factor. Damage severity index is correlated with the damage mode. The findings establish that wave velocity is a reliable parameter for quantifying damage severity across all composite material types considered, with high adjusted R² values of 0.92 for CFRP, 0.89 for FFRP and 0.90 for HFRP. Peak amplitude also shows considerable sensitivity. Finally, this research highlights the limitations of traditional non-destructive evaluation (NDE) techniques and demonstrates the potential of combining multi-damage metrics with advanced imaging methods, such as X-ray micro-computed tomography (X-ray µCT) and scanning electron microscopy (SEM), to provide comprehensive assessment of damage in various composite materials. The proposed methodology offers a promising approach for quantifying the impact damage severity in composite structures, as applicable to wind turbine blades, amongst other structural components.
This study presents an approach to quantifying impact-induced damage severity in composites, focusing on synthetic carbon fibre-reinforced polymer (CFRP), natural flax fibre-reinforced polymer (FFRP) and hybrid fibre reinforced polymer (HFRP) composite of carbon and flax. The investigation aims to quantitatively characterise impact damage under energies ranging from 10 to 70 J through acousto–ultrasonics (AU) testing, proposing an efficient technique for evaluating the integrity of various FRP composites under in-service conditions. AU testing was performed at azimuthal angles of 0°, 30°, 45°, 60° and 90°, utilising acousto–ultrasonic waveform indices (AUWIs), such as wave velocity, peak amplitude, energy content, centroid frequency and skewness factor. The damage severity index is correlated with the damage mode. The findings establish that wave velocity is a reliable parameter for quantifying damage severity across all composite material types considered, with high adjusted R2 values of 0.92 for CFRP, 0.89 for FFRP and 0.90 for HFRP. Peak amplitude also shows considerable sensitivity. Finally, this research highlights the limitations of traditional non-destructive evaluation (NDE) techniques and demonstrates the potential of combining multi-damage metrics with advanced imaging methods, such as X-ray micro-computed tomography (X-ray µCT) and scanning electron microscopy (SEM), to provide a comprehensive assessment of damage in various composite materials. The proposed methodology offers a promising approach for quantifying the impact damage severity in composite structures, as applicable to wind turbine blades, amongst other structural components.