A brief review of laboratory modeling methods of gas hydrate formation in various reactors is given. Installations from both Russia and other countries are analyzed. The development of laboratory hydrate reactors to the semi-industrial scale is considered. The kinetic hydrate promoters and their potential in hydrate-based technologies for gas separation, storage, and transportation are briefly described. The review aims to understand prospects for implementing hydrate technologies into the oil-and-gas industry of Russia and evaluate the world research and development level in this field. The main part of the paper is mainly intended for specialists dealing with the extraction of hydrocarbons and study of gas hydrates, but it can also be of interest to a wider range of readers.
The results of investigations into the kinetics of formation and decomposition of natural gas hydrates obtained from shaped ice using the thermocycling method are reviewed. These data make it possible to find the weight distribution, specific gas content, and features of decomposition of different hydrate shapes synthesized in a reactor.
The use of natural gas as an energy source is increasing significantly due to its low greenhouse gas emissions. However, the common methods of natural gas storage and transportation, such as liquefied or compressed natural gas, are limited in their applications because they require extreme conditions. Gas hydrate technology can be a promising alternative to conventional approaches, as artificially synthesized hydrates provide an economical, environmentally friendly, and safe medium to store energy. Nevertheless, the low rate of hydrate formation is a critical problem that hinders the industrial application of this technology. Therefore, chemical promoters are being developed to accelerate the kinetics of gas hydrate formation. In this paper, the effect of new sodium sulfosuccinate compounds, synthesized based on glycerol and pentaerythritol, on methane hydrate formation was studied. Experiments under dynamic conditions using high-pressure autoclaves demonstrated that the conversion of water-to-hydrate forms increased from 62 ± 5% in pure water to 86 ± 4% for the best promoter at concentration 500 ppm. In addition, the rate of hydrate formation increases 2–4 times for different concentrations. Moreover, none of the synthesized reagents formed foam, compared to sodium dodecyl sulfate, in which the foam rate was 3.7 ± 0.2. The obtained reagents showed good promotional properties and did not form foam, which makes them promising promoters for gas hydrate technology.