The resistivity at low temperatures of the shell-protected Mn 5 Si 3 nanowires presented a complex behavior when diameter reduces down to 180 nm. However, it was found to be the best choice for applications in nanoelectronics.
Mn 5 Si 3 nanowires are believed to be the building blocks of the newest trends of flexible and stretchable devices in nanoelectronics. In this context , growing Mn 5 Si 3 nanowires, as well as characterizing their electronic transport properties provide insight into their phenomenology. In this work, we report on the growth mechanism of Mn 5 Si 3 nanowires produced by the metallic flux nanonucleation method, as well as the resistivity measurements of these nanostructures. Our calculation allows us, by using the Washburn equation for pore infiltration, to give a guess on why we obtain Mn-rich nanowires. In addition, some morphological aspects of the diameter-modulated Mn 5 Si 3 nanowires were discussed based on the classical nucleation theory. From the resistivity measurements for the smallest diameter among the nanowires, we observed a significant reduction of around 37% of the phonons characteristic temperature by fitting the Bloch–Grünesein formula with other sources of scattering. Our results lead to a better understanding on the recent metallic flux nanonucleation growth method, as well as going a step further into the electronic transport properties of the Mn 5 Si 3 nanowires.
16 September 2021 in IEEE Transactions on Nanotechnology
Ever since the advent of scalable production of nanodevices, the search for optimal fabrication techniques of low dimensional materials has gained the attention of scientists and engineers all over the world. In particular, the fabrication of silicon nanowires is being increasingly investigated, due to their potential integration into novel technologies such as biological and optical sensors, solar cells, power generators, and transistors, among others. In this context, this work reports the single-step fabrication of Ga-doped Si bulk and nanowire single crystals. They were obtained through the Metallic Flux Nanonucleation (MFNN) technique, where a nanoporous alumina template was employed to define the nanowire morphology, while Ga was used as flux to both lower the Si melting point and dope the crystals. Our results show that Ga-doped silicon bulk crystals were successfully fabricated via MFNN. The carrier concentration was determined by probing the Hall effect and was found to be (2.5 0.2) x 1019 cm-3. Silicon nanowires were simultaneously obtained, presenting an average wire diameter of 125 26 nm and length up to several tens of microns. These results open the possibility to easily fabricate heavily doped intermetallic cylindrical nanowires, with versatility both on the nanowire composition and the doping element.
31 August 2026 in Journal of Magnetism and Magnetic Materials
Accurate quantification of multiphase fluid saturations in reservoir rocks remains a central challenge in petrophysics, with direct implications for hydrocarbon recovery optimization. Here, we present an integrated methodology that combines high-field nuclear magnetic resonance (NMR) imaging with relaxation-based contrast to quantify oil and water distributions in synthetic porous media. Controlled porous samples were fabricated by sintering soda–lime glass microspheres with defined grain sizes (75–125 $$\upmu {\text {m}}$$ , 150–212 $$\upmu {\text {m}}$$ , 250–300 $$\upmu {\text {m}}$$ ) and saturated with known oil–water proportions. Chemical shift contrast was employed to distinguish fluid phases, while transverse relaxation ( $$T_2$$ ) measurements revealed distinct signal decay behaviors that enabled robust grayscale differentiation in high-field NMR images. A custom image-analysis software was developed to extract intensity histograms from $$T_2$$ -weighted images, allowing pixel-level quantification of each fluid phase. Across all tested samples, the methodology achieved an average quantification error below 10%, demonstrating its robustness and potential as a non-invasive approach for fluid characterization in reservoir analogs, with relevance to reservoir characterization, enhanced oil recovery, and environmental applications.