31 August 2022 in Nanotechnology
Mn 5 Si 3 nanowires are believed to be the building blocks of the newest trends of flexible and stretchable devices in nanoelectronics. In this context , growing Mn 5 Si 3 nanowires, as well as characterizing their electronic transport properties provide insight into their phenomenology. In this work, we report on the growth mechanism of Mn 5 Si 3 nanowires produced by the metallic flux nanonucleation method, as well as the resistivity measurements of these nanostructures. Our calculation allows us, by using the Washburn equation for pore infiltration, to give a guess on why we obtain Mn-rich nanowires. In addition, some morphological aspects of the diameter-modulated Mn 5 Si 3 nanowires were discussed based on the classical nucleation theory. From the resistivity measurements for the smallest diameter among the nanowires, we observed a significant reduction of around 37% of the phonons characteristic temperature by fitting the Bloch–Grünesein formula with other sources of scattering. Our results lead to a better understanding on the recent metallic flux nanonucleation growth method, as well as going a step further into the electronic transport properties of the Mn 5 Si 3 nanowires.
16 September 2021 in IEEE Transactions on Nanotechnology
Ever since the advent of scalable production of nanodevices, the search for optimal fabrication techniques of low dimensional materials has gained the attention of scientists and engineers all over the world. In particular, the fabrication of silicon nanowires is being increasingly investigated, due to their potential integration into novel technologies such as biological and optical sensors, solar cells, power generators, and transistors, among others. In this context, this work reports the single-step fabrication of Ga-doped Si bulk and nanowire single crystals. They were obtained through the Metallic Flux Nanonucleation (MFNN) technique, where a nanoporous alumina template was employed to define the nanowire morphology, while Ga was used as flux to both lower the Si melting point and dope the crystals. Our results show that Ga-doped silicon bulk crystals were successfully fabricated via MFNN. The carrier concentration was determined by probing the Hall effect and was found to be (2.5 0.2) x 1019 cm-3. Silicon nanowires were simultaneously obtained, presenting an average wire diameter of 125 26 nm and length up to several tens of microns. These results open the possibility to easily fabricate heavily doped intermetallic cylindrical nanowires, with versatility both on the nanowire composition and the doping element.
1 October 2026 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
1 December 2024 in Journal of Instrumentation
EAErick Battiston Antonio
+6
TUPI (Timepix4-based Ultra-fast Photon Imaging) is the new family of direct conversion and vacuum-compatible hybrid detectors under design at Sirius, the Brazilian 4th generation light source. Based on the Timepix4 Application Specific Integrated Circuit (ASIC), it targets different kinds of experiments, such as tomography and spectrometry, and will be used in multiple bioimaging beamlines of Orion, Brazil's Biosafety Level 4 (BSL4) Laboratory project. Also, it will cover a wide energy range (5 to 45 keV) by using different sensors materials (Si, GaAs, CdTe, etc.). Designed in a modular approach to ensure scalability for constructing larger active areas in a compact form, each TUPI module will be composed by a set of 3x side-by-side Timepix4 ASICs to provide a sensitive area of approximately 74×28 mm2 (1344×512 pixels of 55 μm pitch), streaming up to 44 kfps through up to 48×10.24 Gbps optical links directly connected to a Data Acquisition (DAQ) system.
1 January 2026 in Journal of Instrumentation
Hybrid pixel detectors are photon-counting devices for X-ray imaging and diffraction techniques at the fourth-generation Sirius synchrotron light source (LNLS/CNPEM). This work presents a comprehensive characterization regarding Modulation Transfer Function and pixel count rate linearity under high-flux conditions of the large-area PIMEGA detectors of 300 and 675 μm thick silicon sensors. They consist of photon-counting devices with a 55 microns pixel size based on Medipix3RX ASIC. The results validate the successful construction and performance of the Medipix3RX-based PIMEGA detectors. The silicon sensor platform offers a viable compromise between absorption efficiency and spatial resolution, making it a highly attractive technological solution for imaging and diffraction applications across the tender to initial hard X-ray energy ranges.