The applications of magnetron sputtering technology on the surface coating of fabrics have attracted more and more attention from researchers. Over the past 15 years, researches on magnetron sputtering coated fabrics have been mainly focused on electromagnetic shielding, bacterial resistance, hydrophilic and hydrophobic properties and structural color etc. In this review, recent progress of the technology is discussed in detail, and the common target materials, technologies and functions and characterization of coated fabrics are summarized and analyzed. Finally, the existing problems and future prospects of this developing field are briefly proposed and discussed.

Small-molecule drugs are effective and thus most widely used. However, their applications are limited by their reliance on active high-affinity binding sites, restricting their target options. A breakthrough approach involves molecular glues, a novel class of small-molecule compounds capable of inducing protein-protein interactions (PPIs). This opens avenues to target conventionally undruggable proteins, overcoming limitations seen in conventional small-molecule drugs. Molecular glues play a key role in targeted protein degradation (TPD) techniques, including ubiquitin-proteasome system-based approaches such as proteolysis targeting chimeras (PROTACs) and molecular glue degraders and recently emergent lysosome system-based techniques like molecular degraders of extracellular proteins through the asialoglycoprotein receptors (MoDE-As) and macroautophagy degradation targeting chimeras (MADTACs). These techniques enable an innovative targeted degradation strategy for prolonged inhibition of pathology-associated proteins. This review provides an overview of them, emphasizing the clinical potential of molecular glues and guiding the development of molecular-glue-mediated TPD techniques.

The development of capacitive pressure sensors with low cost, high sensitivity and facile fabrication techniques is desirable for flexible electronics and wearable devices. In this project, a highly sensitive and flexible capacitive pressure sensor was fabricated by sandwiching a porous PAP sponge dielectric layer between two copper electrodes. The porous PAP sponge dielectric layer was fabricated by introducing highly conductive silver nanowires (AgNWs) into the PDMS sponge with 100% sucrose as a template and with a layer of polydimethylsiloxane (PDMS) film coating the surface. The sensitivity of the PAP sponge capacitive pressure sensor was optimized by increasing the load amount of AgNWs. Experimental results demonstrated that when the load amount of AgNWs increased to 150 mg in the PAP sponge, the sensitivity of the sensor was the highest in the low-pressure range of 0–1 kPa, reaching 0.62 kPa⁻¹. At this point, the tensile strength and elongation of sponge were 1.425 MPa and 156.38%, respectively. In addition, the specific surface area of PAP sponge reached 2.0 cm²/g in the range of 0–10 nm pore size, and showed excellent waterproof performance with high elasticity, low hysteresis, light weight, and low density. Furthermore, as an application demonstration, ~110 LED lights were shown to light up when pressed onto the optimized sensor. Hence, this novel porous PAP-sponge-based capacitive pressure sensor has a wide range of potential applications in the field of wearable electronics.

Microbial pigments, regarded as the most potential biomass pigments, have lately attracted increasing attention in textile dyeing due to their sustainability and cleaner production. The pyrrole structure microbial pigment, called prodigiosin, recently have become a research hotspot for its bright colors and antibacterial function. However, in most case the extraction and preparation are time-consuming and expensive processes since these kinds of microbial pigments are intracellular metabolites. In order to promote the application of microbial pigments in textile dyeing, a novel idea of preparing dye liquid of pyrrole structure pigments based on fermentation broth was put forward via increasing the proportion of extracellular pigments. A model membrane platform was established with a planar lipid bilayer to investigate transmembrane transport of microbial pigments and permeability barrier of cell membrane. The nano-dispersion of pigments was produced as the dye liquor owing to high-throughput transmembrane transfer of intracellular pigments and the increase of extracellular pigments proportion. The results indicated that the size and surface electrical properties of the pigments had contributed much to the mass transfer. It is also showed that transmembrane transmission of the intracellular pigments could be regulated by physical and chemical methods. With the improvement of transmembrane transfer efficiency of microbial pigments and the proportion of extracellular pigments, the complicated biological separation process could be avoided and the application of microbial pigments in textile dyeing can be promoted.