This paper proposes a novel method to predict the radar detection errors in a complex environment by considering slant range and angular error. This method involves analysis of the electromagnetic wave propagation path loss in troposphere using discrete mixed Fourier transform based split–step parabolic equation. For analysis, modeling of the terrain profile using a digital elevation model and estimating the refractive index by interpolating upper–air observations is conducted. The direction of refracted antenna’s main beam is predicted using the path loss, and by comparing it with the antenna boresight, the radar errors are computed according to the received timing of the radar echo. To apply the proposed method to real scenarios, the atmospheric environment within the analysis area is modeled using meteorological data collected on a specific day. By applying the proposed method to an arbitrary date and location, the radar errors in a long–range propagation environment where refraction occurs are analyzed.
30 November 2023 in The Journal of Korean Institute of Electromagnetic Engineering and Science
This paper proposes a real-time prediction of duct using a genetic algorithm (GA)-based refractivity from clutter (RFC) method and the parabolic equation (PE) method. Three dates with duct formation are selected, and the refractivity calculated using atmospheric measurements is compared with the refractivity obtained through the GA-based RFC method. Additionally, using the PE method, the electromagnetic wave propagation for each refractivity are analyzed and compared. The atmospheric refractivity and propagation prediction results derived from the proposed process are validated to be similar to the measurements. The proposed method enables real-time duct prediction and propagation trend analysis at low altitudes using clutter signals.
30 June 2023 in The Journal of Korean Institute of Electromagnetic Engineering and Science
This paper proposes the algorithm to control the current ratio of the transmitting (Tx) coils for proper power distribution to the two receiving (Rx) coils in wireless power transfer (WPT) system. The proposed algorithm assumes that each Rx coil appears at different times to consider the situation where multiple users request power transmission as practically as possible. That is, suppose the second Rx coil enters the charging space later than the first Rx coil. When each coil enters the charging space, only the Tx coil is used to obtain the value required for calculation. Using the obtained result, the optimized Tx coil current is calculated by the proposed algorithm and proper power distribution to both Rx coils is achieved. Three Tx coils and two Rx coils are constructed using the ANSYS MAXWELL simulation tool. As a result of applying the proposed algorithm, it was confirmed that a similar level of power was transmitted between 40∼60%, respectively. The sum of the power transmitted to the two Rx coils also appeared as more than 75%.
31 May 2022 in The Journal of Korean Institute of Electromagnetic Engineering and Science