Adam Chleboś

Mr. Adam Chleboś

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 December 2021 in Materials
Verified
Journal Article
Open access
PDF file
WBWacław Mariusz Brachaczek
Wacław Mariusz Brachaczek
ACAdam Chleboś
Adam Chleboś
ZGZbigniew Giergiczny
Zbigniew Giergiczny
This paper presents the results of research on the influence of polymer modifiers: styrene-acrylic copolymer, vinyl acetate/ethylene (EVA), vinyl acetate/acrylic copolymer (VAAc), and VA/VeoVa/acrylic terpolymer on the water permeability and adhesion of cement-containing waterproofing mortars in concrete. The content of the polymers in the composition of the mortars was 15, 20 and 26% (m/m) in relation to the weight of the dry ingredients. Using microscopic methods, an attempt was made to analyse the relationship between the microstructure of the mortars and the properties of these polymers. The EVA and the vinyl acetate/acrylic copolymer, which were used in the form of dry powders, had the most favourable effect on water permeability and adhesion to the concrete substrate. They may prove to be useful for the production of one-component cement-containing waterproofing mortars. On the other hand, the VA/VeoVa/acrylic terpolymer modifier had the least favourable effect on the tested properties. For mortars with this modifier, the desired water-permeability parameters were not achieved. Depending on the amount of polymer modifier, the mortars were characterized by differences in watertightness, as established on the basis of changes in porosity and differences in the adhesion of the cement-polymer paste to the surface of aggregate grains. It was determined that the type of polymer and its dispergation properties influence the water permeability of mortars, as well as their adhesion to concrete substrates.

16 February 2023 in Materials Proceedings
Verified
Conference Paper
Open access
PDF file
WBWacław Mariusz Brachaczek
Wacław Mariusz Brachaczek
ACAdam Chleboś
Adam Chleboś
MKMagdalena Kupczak
Magdalena Kupczak
SSSebastian Spisak
Sebastian Spisak
MSMichał Stybak
Michał Stybak
KŻKatarzyna Żyrek
Katarzyna Żyrek
This publication presents the results of a study of the effect of partial replacement of cement with waste and natural materials: ground blast furnace slag, fly ash and lime meal on the strength properties of mortars compared to a reference mortar without these additives. In subsequent tests, these materials were gradually replaced with up to 10% CEM I cement. Their effects on consistency and compressive and flexural tensile strengths after 28 days of maturation were investigated. The tests were carried out on blocks measuring 40 mm × 40 mm × 160 mm according to the standard. In the range of tests analysed, the results obtained make it feasible to consider the possibility of partially replacing cement with silica fly ash and ground granulated blast furnace slag in cement mortars.

12 May 2023 in Civil and Environmental Engineering
Verified
Journal Article
Open access
PDF file
WBWacław Brachaczek
Wacław Brachaczek
ACAdam Chleboś
Adam Chleboś
The article attempts to assess the possibility of using non-woven fabrics made of waste fibers in cladding panels. For this purpose, woolen and polypropylene nonwovens were tested for mass per unit area, characteristic opening size, and lengthwise and crosswise elongation at maximum strength. Non-woven fabrics were placed in the middle of the thickness of cement and gypsum boards and subjected to tests of density, thermal conductivity coefficient λ , and bending strength. The influence of individual nonwoven fabrics with different properties on the properties of the finished composite was determined. It was found that wool nonwoven fabrics had the best effect on the thermal conductivity coefficient. A better affinity for nonwoven fabrics was shown by gypsum mortar. The best influence on the bending strength of the panels had polyester non-woven fabrics with the lowest mass per unit area and the largest characteristic opening size.

18 March 2022 in MATERIAŁY BUDOWLANE
Verified
Journal Article
Closed access
WBWacław Mariusz Brachaczek
Wacław Mariusz Brachaczek
ACAdam Chleboś
Adam Chleboś
W artykule przedstawiono wyniki badań wpływu włókien odpadowych z branży garbarskiej i tekstylnej na wytrzy- małość na zginanie zapraw cementowych i gipsowych w aspek- cie wykorzystania ich do produkcji płyt okładzinowych. Bada- nia przeprowadzono na próbkach zapraw zawierających spoiwo cementowe i gipsowe o wymiarach 12 x 75 x 150 mm. Większy wpływ na poprawę właściwości wytrzymałościowych miały włókna odpadowe w kompozytach zawierających cement. Stwierdzono, że pomimo znacznego zróżnicowania włókien ich dodatek poprawił wytrzymałość na zginanie, co uzasadnia ich zastosowanie w produkcji materiałów stosowanych w budownictwie.

17 December 2025 in Przegląd Budowlany
Verified
Journal Article
Closed access
WBWacław Mariusz Brachaczek
Wacław Mariusz Brachaczek
ACAdam Chleboś
Adam Chleboś
W artykule przedstawiono współcześnie stosowane płyty okładzinowe, ze szczególnym uwzględnieniem płyt bazujących na spoiwie cementowym. Omówiono główne wymagania tych materiałów. Przedstawiono rozważania dotyczące rozwoju badań nad cementowymi płytami okładzinowymi, w których zastosowano zbrojenie w postaci perforowanej włókniny wykonanej z wełny odpadowej. Przedstawiono nową technologię produkcji takich płyt, w aspekcie optymalizacji właściwości fizycznych, takich jak gęstość i współczynnik przewodzenia ciepła przy jednoczesnych jak najwyższych właściwościach wytrzymałościowych. Uzyskane wyniki potwierdziły korzystne, lepsze właściwości od płyt dostępnych na rynku o zbliżonym przeznaczeniu.

21 December 2021 in MATERIAŁY BUDOWLANE
Verified
Journal Article
Closed access
WBWacław Mariusz Brachaczek
Wacław Mariusz Brachaczek
ACAdam Chleboś
Adam Chleboś
Wartykule przedstawiono wpływ wilgoci na degradację zabytkowej tkanki obiektów historycznych. Omówiono mechanizm przedostawania się wilgoci do murów. Zaprezentowano rozwiązania materiałowe mające na celu eliminację źródeł zawilgocenia obiektów, sposoby osuszania murów oraz system tynków renowacyjnych. Zwrócono uwagę na konieczność indywidualnego podejścia do budynków zabytkowych oraz poprzedzenie prac renowacyjnych wnikliwą analizą.