The high data rate and large bandwidth of orthogonal frequency division multiplexing(OFDM) modulations have made the integrated waveform design using OFDM-based signals a popular research topic in recent years. However, OFDM signals are sensitive to the Doppler frequency bias and multipath effects, which are traditionally accommodated by cyclic prefixes (CP) inserted before each OFDM symbol. Since the CP is the partial copy of the OFDM symbol, it not only loses energy in communication systems but also forms false targets after radar signal processing. To address the shortcomings of conventional OFDM, this paper proposes a modified CP-free OFDM joint radar communication system(JRCS). It transmits the OFDM pulse signal to certain targets and/or communication systems and receives echoes in the pulse repetition interval. By removing CP, the radar system can compress the echoes without ghost targets. Through reasonable sampling which should be designed significantly, the communication systems demodulate the OFDM pulse to extract information without intersymbol interference in multipath channels. Furthermore, the constraints of the time, frequency, and sampling on the system are analyzed in detail and an illustrating system under an air-to-ground scenario is constructed. Simulation results show that the proposed signal design and processing method has a better performance compared to conventional OFDM signals.
The data volume and computation task of MIMO radar is huge; a very high-speed computation is necessary for its real-time processing. In this paper, we mainly study the time division MIMO radar signal processing flow, propose an improved MIMO radar signal processing algorithm, raising the MIMO radar algorithm processing speed combined with the previous algorithms, and, on this basis, a parallel simulation system for the MIMO radar based on the CPU/GPU architecture is proposed. The outer layer of the framework is coarse-grained with OpenMP for acceleration on the CPU, and the inner layer of fine-grained data processing is accelerated on the GPU. Its performance is significantly faster than the serial computing equipment, and satisfactory acceleration effects have been achieved in the CPU/GPU architecture simulation. The experimental results show that the MIMO radar parallel simulation system with CPU/GPU architecture greatly improves the computing power of the CPU-based method. Compared with the serial sequential CPU method, GPU simulation achieves a speedup of 130 times. In addition, the MIMO radar signal processing parallel simulation system based on the CPU/GPU architecture has a performance improvement of 13%, compared to the GPU-only method.
Since orthogonal frequency division multiplexing (OFDM) signals are sensitive to Doppler shift, OFDM signals with cyclic prefix (CP) not only reduce the communication rate but also result in symmetric pseudo peaks in the ambiguity function of the radar, which eventually lead to the degradation of the performance of the joint radar communication system (JRCS). In this study, a novel JRCS is proposed based on the filter bank multicarrier (FBMC) waveform for the inverse synthetic aperture radar (ISAR) imaging and communication system. On the one hand, FBMC waveforms are capable of low orthogonality between subcarriers, which can counter Doppler and multipath effects. On the other hand, FBMC waveforms do not require CP, so the false targets can be avoided and spectral efficiency can be improved. The influence of multipath effect and Doppler shift on FBMC waveform in an integrated system is analysed in detail, and a Doppler compensation algorithm suitable for FBMC‐integrated waveform is proposed. The phase error caused by target motion can be iteratively compensated to obtain a well‐focussed ISAR image. Finally, considering the ISAR image entropy after motion compensation as the evaluation metric, extensive simulation experiments verify the noise robustness and effectiveness of the proposed algorithm. Compared with the conventional OFDM and CP‐OFDM schemes, the simulation verifies that the proposed waveform design and processing method has better performance in the ISAR imaging and communication integrated system.
In this paper, a joint communication interference integration signal waveform is proposed to satisfy the need of electronic system integration in civil and military uses, and mitigate the tension of spectrum resource. We design the system structure of the integrated signal model and propose the communication receiving processing flow of the integrated system. We utilize the dense false-target jamming style to raise the constant false alarm rate detection threshold via the delay superposition of multiple groups of frequency modulation (FM) slope mismatch jamming signals, which can play a role in protecting our target from being detected. Furthermore, linear frequency modulation (LFM) signals with different FM slopes and Doppler frequencies are obtained via the modulation mapping of communication data; thus, a single LFM signal can carrybit data. Through correlation processing and frequency detection, code sequence information can be obtained to achieve communication function. The simulation results show that the integrated signal has the effect of shielding and jamming the pulse compression radar. Moreover, the system has a better bit error rate and a high communication rate, which can ensure that the communication task of sending accurate instructions is completed while implementing effective interference.
7 July 2023 in IEEE Geoscience and Remote Sensing Letters
A novel waveform for joint imaging and jamming based on multiple-input multiple-output (MIMO) frequency division multicarrier modulation is proposed in this letter. The frequency division signal of the MIMO system can increase the jamming bandwidth. Since multiple forwarding will form multiple frequency points, forming frequency division MIMO and reducing the effect of anti-jamming measures such as frequency hopping. For inverse synthetic aperture radar (ISAR), the digital beamforming (DBF) of MIMO radar can perform beam direction in a specific direction during signal processing, so that it has high-resolution imaging capability. The results show that the proposed waveform for the joint radar imaging and electronical jamming can simultaneously perform high-resolution imaging under the premise of satisfying the jamming capability.
Multiple‐Input‐Multiple‐Output (MIMO) radar has the characteristic of multiple antenna channels, bringing on a big data volume for signal processing. Therefore, the trade‐off between detection ability and computational efficiency is always considered. In this article, an optimisation system is proposed to enhance the real‐time performance of frequency division MIMO radar without compromising accuracy. For the scenario of low‐altitude small target detection, a signal processing acceleration method is proposed and a MIMO radar optimisation system based on graphics processing unit (GPU) architecture is built. The signal model of frequency division MIMO radar is first established, improving the classical signal processing flow efficiency from the perspective of reducing fast Fourier transform (FFT) times and windowing operation times. To achieve an advanced acceleration, the parallel architecture of ArrayFire‐library in GPU is then employed. Distinct minimum parallel units are extracted by analysing the principle of digital beamforming (DBF), pulse compression, moving target detection (MTD), and constant false‐alarm rate (CFAR) algorithms. And the corresponding parallel algorithms are designed to constitute a parallel acceleration system of frequency division MIMO. Simulation results indicate that the proposed method significantly improves the efficiency of MIMO system with a maximum acceleration ratio of 65 times, meeting the real‐time processing requirements.