Gaogao Liu

Dr. Gaogao Liu

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 December 2022 in IEEE Sensors Journal
Verified
Journal Article
Closed access
GLGaogao Liu
Gaogao Liu
YWYouming Wang
Youming Wang
WYWenbo Yang
Wenbo Yang
The high data rate and large bandwidth of orthogonal frequency division multiplexing(OFDM) modulations have made the integrated waveform design using OFDM-based signals a popular research topic in recent years. However, OFDM signals are sensitive to the Doppler frequency bias and multipath effects, which are traditionally accommodated by cyclic prefixes (CP) inserted before each OFDM symbol. Since the CP is the partial copy of the OFDM symbol, it not only loses energy in communication systems but also forms false targets after radar signal processing. To address the shortcomings of conventional OFDM, this paper proposes a modified CP-free OFDM joint radar communication system(JRCS). It transmits the OFDM pulse signal to certain targets and/or communication systems and receives echoes in the pulse repetition interval. By removing CP, the radar system can compress the echoes without ghost targets. Through reasonable sampling which should be designed significantly, the communication systems demodulate the OFDM pulse to extract information without intersymbol interference in multipath channels. Furthermore, the constraints of the time, frequency, and sampling on the system are analyzed in detail and an illustrating system under an air-to-ground scenario is constructed. Simulation results show that the proposed signal design and processing method has a better performance compared to conventional OFDM signals.

5 January 2022 in Sensors
Verified
Journal Article
Open access
PDF file
GLGaogao Liu
Gaogao Liu
WYWenbo Yang
Wenbo Yang
PLPeng Li
Peng Li
GQGuodong Qin
Guodong Qin
JCJingjing Cai
Jingjing Cai
DHDongjie Huang
Dongjie Huang
The data volume and computation task of MIMO radar is huge; a very high-speed computation is necessary for its real-time processing. In this paper, we mainly study the time division MIMO radar signal processing flow, propose an improved MIMO radar signal processing algorithm, raising the MIMO radar algorithm processing speed combined with the previous algorithms, and, on this basis, a parallel simulation system for the MIMO radar based on the CPU/GPU architecture is proposed. The outer layer of the framework is coarse-grained with OpenMP for acceleration on the CPU, and the inner layer of fine-grained data processing is accelerated on the GPU. Its performance is significantly faster than the serial computing equipment, and satisfactory acceleration effects have been achieved in the CPU/GPU architecture simulation. The experimental results show that the MIMO radar parallel simulation system with CPU/GPU architecture greatly improves the computing power of the CPU-based method. Compared with the serial sequential CPU method, GPU simulation achieves a speedup of 130 times. In addition, the MIMO radar signal processing parallel simulation system based on the CPU/GPU architecture has a performance improvement of 13%, compared to the GPU-only method.

27 June 2023 in Remote Sensing
Verified
Journal Article
Open access
PDF file
YCYingchao Chen
Yingchao Chen
PLPeng Li
Peng Li
EYErxing Yan
Erxing Yan
ZJZehuan Jing
Zehuan Jing
GLGaogao Liu
Gaogao Liu
ZWZhao Wang
Zhao Wang
In recent years, the rapid development of deep learning technology has brought new opportunities for specific emitter identification and has greatly improved the performance of radar emitter identification. The most specific emitter identification methods, based on deep learning, have focused more on studying network structures and data preprocessing. However, the data selection and utilization have a significant impact on the emitter recognition efficiency, and the method to adaptively determine the two parameters by a specific recognition model has yet to be studied. This paper proposes a knowledge graph-driven convolutional neural network (KG-1D-CNN) to solve this problem. The relationship network between radar data is modeled via the knowledge graph and uses 1D-CNN as the metric kernel to measure these relationships in the knowledge graph construction process. In the recognition process, a precise dataset is constructed based on the knowledge graph according to the task requirement. The network is designed to recognize target emitter individuals from easy to difficult by the precise dataset. In the experiments, most algorithms achieved good recognition results in the high SNR case (10–15 dB), while only the proposed method could achieve more than a 90% recognition rate in the low SNR case (0–5 dB). The experimental results demonstrate the efficacy of the proposed method.

14 April 2024 in Remote Sensing
Verified
Journal Article
Open access
PDF file
GLGaogao Liu
Gaogao Liu
ZHZiyu Huang
Ziyu Huang
QZQidong Zhang
Qidong Zhang
贝慕贝贝 慕
贝贝 慕
HGHongfu Guo
Hongfu Guo
In this article, we propose a joint waveform based on universal filtered multicarrier (UFMC) chirp for radar jamming and communication joint systems. Modulation of radar jamming chirp signals and communication signals on different subcarrier groups in the UFMC sub-band is used to achieve the waveform design. The jamming signal in the waveform contains a frequency shift coefficient that depends on the delay time, which can effectively improve the anti-frequency hopping ability and enhance the overall jamming efficiency. Simultaneously jamming signals can provide assistance in channel estimation and equalization of communication, improving the information transmission quality of communication subsystems. We concluded through reasonable trade-off analysis that the combined weight of radar jamming and communication is closely related to the overall performance of the waveform. The simulation results show that the proposed UFMC chirp synthesized waveform has good jamming and communication performance. Software defined radio (SDR) simulation experiments demonstrated the effectiveness of this method in practical environments.

1 November 2024 in IEEE Geoscience and Remote Sensing Letters
Verified
Journal Article
Closed access
GLGaogao Liu
Gaogao Liu
QZQidong Zhang
Qidong Zhang
ZHZiyu Huang
Ziyu Huang
TCTiantian Chen
Tiantian Chen
BMBeibei Mu
Beibei Mu
HGHongfu Guo
Hongfu Guo
In order to mitigate the tension of spectrum resources, special attention has been devoted to joint waveforms based on radar signal to play a multifunctional role. This letter designed a dense false target jamming signal (DFTJS) synthetic aperture radar (SAR) imaging method based on the phase modulation to solve the problem of range ambiguity when using conventional DFTJS for detection. The characteristic of this method is to modulate a phase information for each false target jamming signal (FTJS), without changing its jamming ability, so that the echo of the entire jamming signal has the characteristic of secondary pulse compression (PC) in the range direction, thereby eliminating the influence of range ambiguity. Theoretical analysis and numerical simulations have shown that the use of phase modulation in DFTJS can achieve high-resolution imaging of specific target areas while causing jamming to noncooperative radar (NCR).

1 February 2022 in Applied Optics
Verified
Journal Article
Closed access
PDF file
GLGaogao Liu
Gaogao Liu
WYWenbo Yang
Wenbo Yang
YWYouming Wang
Youming Wang
ZWZhao Wang
Zhao Wang
DHDongjie Huang
Dongjie Huang
BWBin Wu
Bin Wu
In this paper, a joint communication interference integration signal waveform is proposed to satisfy the need of electronic system integration in civil and military uses, and mitigate the tension of spectrum resource. We design the system structure of the integrated signal model and propose the communication receiving processing flow of the integrated system. We utilize the dense false-target jamming style to raise the constant false alarm rate detection threshold via the delay superposition of multiple groups of frequency modulation (FM) slope mismatch jamming signals, which can play a role in protecting our target from being detected. Furthermore, linear frequency modulation (LFM) signals with different FM slopes and Doppler frequencies are obtained via the modulation mapping of communication data; thus, a single LFM signal can carrynbit data. Through correlation processing and frequency detection, code sequence information can be obtained to achieve communication function. The simulation results show that the integrated signal has the effect of shielding and jamming the pulse compression radar. Moreover, the system has a better bit error rate and a high communication rate, which can ensure that the communication task of sending accurate instructions is completed while implementing effective interference.