Plastic is a highly used material in various sectors. Due to its plentiful availability in the environment, microorganism surface contamination is a risk. The aim of this work is to achieve bactericidal capacity in plastics that reduces the microorganism’s colonization risk and, consequently, reduces the chances of having an infection with E. coli and Listeria monocytogenes bacteria. Using polylactic acid (PLA) as the polymeric matrix, mixtures in concentrations of metal additive of ions of silver (Ag) R148 and S254 in 1% and 2% have been studied and manufactured. The materials are developed on an industrial scale through a process that proceeds as follows: (I) a mixture of polymer and additive in a double-screw compounder to obtain the compound in different concentrations, (II) the manufacture of filaments with a single-screw extruder, (III) 3D printing parts. Therefore, materials are evaluated in the form of powder, pellets and printed pieces to ensure their antibacterial effectiveness throughout the manufacturing process. The results of the research show antibacterial effectiveness for E. coli and Listeria monocytogenes of metal additives and polymeric compounds for all manufacturing phases on an industrial scale, with the effectiveness for additive R148 predominating at a concentration of 2%, demonstrating its microbial efficacy on surfaces with potential application in medicine.
The additive manufacturing process by extrusion can provide an economical alternative to the manufacture of metal parts compared to powder bed fusion technologies, which are more expensive and with much lower production rates. The alternative’s viability is based on knowing how to print by extrusion metallic parts with adequate mechanical properties. This work explains how to print traction dog-bone specimens by fused fabrication of a filament loaded with stainless steel 316L powder. Subsequent, postprocesses of debinding and sintering for increasing specimen’s density are also described. The specimens were tested to assess the mechanical properties of traction achieved: elastic limit, youth modulus, maximum stress, rotational stress and Poisson's modulus. Finally, the results were compared with those obtained in an AISI 316L rolled steel specimen, and the obtained micro-structured was studied. Keywords: FFF, 316L, 3D printing, Sintering, Debinding.