Recycling of electric and electronic waste products (e-waste) which amounted to more than 50 million metric tonnes per year worldwide is a massive and global operation. Unfortunately, an estimated 70-80% of this waste has not been properly managed because the waste went from developed to low-income countries to be dumped into landfills or informally recycled. Such recycling has been carried out either directly on landfill sites or in small, often family-run recycling shops without much regulations or oversights. The process traditionally involved manual dismantling, cleaning with hazardous solvents, burning and melting on open fires, etc., which would generate a variety of toxic substances and exposure/hazards to applicators, family members, proximate residents and the environment. The situation clearly calls for global responsibility to reduce the impact on human health and the environment, especially in developing countries where poor residents have been shouldering the hazardous burden. On the other hand, formal e-waste recycling has been mainly conducted in small scales in industrialised countries. Whether the latter process would impose less risk to populations and environment has not been determined yet. Therefore, the main objectives of this review are: 1. to address current trends and emerging threats of not only informal but also formal e-waste management practices, and 2. to propose adequate measures and interventions. A major recommendation is to conduct independent surveillance of compliance with e-waste trading and processing according to the Basel Ban Amendment. The recycling industry needs to be carefully evaluated by joint effort from international agencies, producing industries and other stakeholders to develop better processes. Subsequent transition to more sustainable and equitable e-waste management solutions should result in more effective use of natural resources, and in prevention of adverse effects on health and the environment.

There is a growing need to develop lead-free shielding materials that are safe, low weight, durable, environmentally friendly, chemically and mechanically stable and customizable for specific applications. Fused deposition modeling (FDM), an additive manufacturing technique based on the extrusion of a thermoplastic filament into a 3D printed object one layer at a time, could be employed well in applications involving ionizing radiation due to its relatively low cost, design flexibility and high manufacturing precision. This study aimed at developing 3D printing composites that contain Titanium dioxide as a filler agent for shielding in a medical radiation environment. First, the effect of low-dose ionizing radiation (up to 15 Gy) on the mechanical properties of common 3D printing polymers, ABS, ULTRAT, PLA, NYLON, ASA and PETG, was investigated. Since ABS experienced the lowest variation in its ultimate tensile strength (±5%) and Young’s modulus (−5%/+11%), it was chosen as a matrix for a new extruded 3D filament containing TiO₂ at 1 wt.%, 3 wt.%, and 5 wt.%. With the incorporation of TiO₂ at different filler contents, the UTS of the ABS composites varied between 24.1 MPa and 28.4 MPa, with the highest value recorded for 3 wt.% TiO₂. Young’s modulus values were dependent on both the TiO₂ concentration and on the irradiation dose. In addition, the ABS/TiO₂ composites with a higher filler content (3 wt.% and 5 wt.%) maintained their attenuation ability even after exposure to a radiation dose of 100 Gy as opposed to pure ABS, which exhibited a ~2.5% reduction in its mass attenuation coefficient after exposure to the same dose of radiation. The pilot investigation performed demonstrated that the newly developed ABS/TiO₂ composite containing 5 wt.% of filler can be successfully employed to shield electronic devices operating in a radiotherapy room.

The rapid development of micro- and nanostructures containing silver nanoparticles is based on their unique physical properties. Despite the new applications of silver nanoparticles in nanomedicine are under heavy discussions, silver nanoparticles could be used in liquid radiation detectors thanks to the irradiation-induced surface plasmon resonance (SPR) phenomena observed in the colloidal solutions. Silver nitrate (1 mM AgNO₃) and sodium citrate (1 wt% and 5 wt% C₆H₅O₇Na₃) were used as precursors for the fabrication of colloidal solutions. Prepared solutions were exposed to gamma-rays from a ⁶⁰Co gamma therapy unit ‘Rokus-M’ to varying absorbed doses, from 2 to 250 Gy. A UV/VIS/NIR spectrometer (Avantes-2048) was used for the measurement of the optical properties (absorbance) of the silver solutions. It was found that an initial absorbed dose of 2 Gy induced the formation of spherical silver nanoparticles as it was indicated in the absorbance spectrum of the solution, which had a well-pronounced absorption maximum at the wavelength of 410 nm. There is a potential to measure absorbed doses down to around 20 mGy. The SPR peaks at the wavelengths of 500–700 nm were found at the highest investigated doses >100 Gy, indicating the presence of silver nanorods. The colour of colloidal solutions ranged from pale yellow to green and was dependent on the absorbed dose. The investigation has shown that density, size and shape of synthesised silver nanoparticles are dependent on the absorbed dose and that shape transformations of the particles due to irradiation are possible. Application of colloidal solutions containing silver nanoparticles for dosimetric purposes is discussed on the basis of the obtained results.

Polymer gels and films, due to their near equivalence to biological tissue, are amongst the most promising future dosimetry tools for medical applications. The application of polymer dose gels is limited by the sensitivity of dose readout methods and dose gel properties. It is a challenge to find suitable dosimeters for registration of doses delivered to the target by orthovoltage therapy units. The application of metal-particle-enriched polymer composites for dose registration in X-ray therapy might be an elegant solution, especially if recent dose-reading technologies exploring advantages of different physical phenomena are involved. In this work, X-rays from the orthovoltage therapy range were used for the irradiation of experimental samples. In addition, radiation-induced processes of formation of silver nanoparticles in AgNO₃–PVA gels and in free standing AgNO₃PVA films, also containing some additional solvents, namely glycerol, ethanol, and isopropanol, have been investigated, with the aim to apply the developed composites for medical dosimetry purposes. A simple and environmentally friendly method for the formation of free-standing AgPVA films at room temperature was proposed and realized for preparing AgPVA films for investigation. Radiation-induced synthesis of silver nanoparticles in AgPVA composites was investigated, analyzing LPSR-based UV-VIS spectral changes to the irradiated films with respect to irradiation doses, and dose-related tendencies were also evaluated. It was shown that AgPVA films were more sensitive for detection of doses from the interval 0–1.0 Gy, thus indicating potential application of AgPVA films for dosimetry purposes.

Background: Until today, industrial sources contribute to the multifaceted contamination of environmental air. Exposure to air pollutants has the potential to initiate and promote asthma and chronic obstructive pulmonary disease (COPD). At global scale, both entities cause the majority of about 4 million annual deaths by respiratory disease. However, we identified industrial contamination as a subgroup of air pollution that may be associated with this burden and is underinvestigated in research. Therefore, the aim of this study is to investigate associations between substances industrially released into environmental air and the occurrence of asthma and COPD in the human population. Here we present the protocol for our systematic review of the current evidence.Methods: The following determinations will be applied during the systematic review process and are specified in the protocol that complies with the PRISMA-P statement. Populations of children and adults, as well as outdoor workers, exposed to industrially released air pollutants are of interest. Eligible studies may include subjects as controls who are non- or less exposed to the investigated air pollutants. The outcomes new-onset asthma and/or COPD investigated with risk ratio, odds ratio, hazard ratio, incidence rate ratio, cumulative incidence, and incidence rate are eligible. We will search the electronic literature databases EMBASE, MEDLINE, and Web of Science for peer-reviewed reports of incidence studies and incidence case-control studies. After systematic sorting of initial records, included studies will be subjected to quality assessment. Data will be synthesized qualitatively and, if appropriate, quantitatively for risk ratio and odds ratio. We will maintain and provide a PRISMA report.Discussion: Results of this systematic review may indicate alterations of incidence and risk of asthma and/or COPD in populations within industrial exposure radiuses including outdoor workplaces. Specific causal substances and compositions will be identified, but results will depend on the exposure assessment of the eligible studies. Our approach covers effects of industrial contributions to overall air pollution if studies reportedly attribute investigated emissions to industry. Results of this study may raise the question wether the available higher-level evidence sufficiently covers the current scale of industrial exposure scenarios and their potential harm to respiratory health.Trial registration: This protocol was registered in PROSPERO, registration numberCRD42020151573.

Simple low-cost, nontoxic, environmentally friendly plant-extract-based polymer films play an important role in their application in medicine, the food industry, and agriculture. The addition of silver nanoparticles to the composition of these films enhances their antimicrobial capabilities and makes them suitable for the treatment and prevention of infections. In this study, polymer-based gels and films (AgRonPVA) containing silver nanoparticles (AgNPs) were produced at room temperature from fresh red onion peel extract (“Ron”), silver nitrate, and polyvinyl alcohol (PVA). Silver nanoparticles were synthesized directly in a polymer matrix, which was irradiated by UV light. The presence of nanoparticles was approved by analyzing characteristic local surface plasmon resonance peaks occurring in UV-Vis absorbance spectra of irradiated experimental samples. The proof of evidence was supported by the results of XRD and EDX measurements. The diffusion-based method was applied to investigate the antimicrobial activity of several types of microbes located in the environment of the produced samples. Bacteria Staphylococcus aureus ATCC 29213, Acinetobacter baumannii ATCC BAA 747, and Pseudomonas aeruginosa ATCC 15442; yeasts Candida parapsilosis CBS 8836 and Candida albicans ATCC 90028; and microscopic fungi assays Aspergillus flavus BTL G-33 and Aspergillus fumigatus BTL G-38 were used in this investigation. The greatest effect was observed on Staphylococcus aureus, Acinetobacter baumannii, and Pseudomonas aeruginosa bacteria, defining these films as potential candidates for antimicrobial applications. The antimicrobial features of the films were less effective against fungi and the weakest against yeasts.