Gas injection is one of the prospective methods in the development of unconventional oil reserves. Before implementation in the field, it is necessary to justify the effectiveness of using gas agents in specific object conditions. Experiments of oil displacement on physical models with subsequent numerical modeling can provide the information necessary to justify the feasibility of using gas injection in specific reservoir conditions. This work is devoted to a series of experiments determining the minimum miscibility pressure (MMP) on a slim tube model and the analysis of oil displacement dynamics for various gas compositions, as well as numerical modeling. Displacement experiments were carried out using a recombined oil sample from one of the fields in Western Siberia. The MMP was determined by the classical method of inflection point on the displacement efficiency versus injection pressure curve, which was 34.6 MPa for associated petroleum gas (APG) and 49.9 MPa for methane. The dysnamics of oil displacement for different gas compositions at the same injection pressure showed that APG and carbon dioxide (CO2) are the most effective in the conditions of the studied field. The influence of the gas composition on the gas breakthrough point was also shown. It is revealed that the change in the concentration of the displacing agent in the outgoing separation gas helps define in more detail the process of displacement and the processes implemented in this case for various displacing gas agents. Similarly, it is shown that the displacing efficiency of a gas agent in a miscibility injection mode is affected by the configuration of wells when it is necessary to achieve MMP in reservoir conditions. For the immiscible gas injection mode, no influence of the well configuration was observed.
In order to evaluate the efficiency of the catalytic aquathermolysis process, physical modeling was carried out on bituminous sediments of Paleocene–Miocene carbonate rocks, characterized by the presence of open and closed fractures. In this context, three filtration experiments were performed on an unextracted reservoir model with extra-viscous oil (EVO). Prior to the experiments, the mineral composition of the rock was determined by X-ray diffraction analysis (XRD) and the content of organic matter and coking products was determined before and after the experiment by thermogravimetric analysis (TGA) as well as the group composition of oil (SARA) before and after the experiment by nuclear magnetic resonance (NMR), gas composition at the fluid separation line, and oil displacement coefficient (ODC). The results of the conducted experiments show that the efficiency of displacement of extraviscous oil could be significantly increased by the use of a solvent and the combined use of a solvent and a catalyst (+9.3% and +17.1% of the oil displacement coefficient, respectively), which is associated with the processes of oil refining.
In this work, slim tube displacement tests for minimum miscibility pressure MMP were carried out. Based on the displacement data, the MMP was calculated by statistical regression using linear and quadratic extrapolation with threshold values of 90% and 95% oil recovery as well as the intersection of trend lines for immiscible and miscible displacement regimes. The obtained data show a significant variation in the range of MMP values depending on the calculation method. To clarify the MMP value, an analysis of displacement dynamics was carried out. The ratio of the volume flow rate of reservoir oil to the volume flow rate of the injected gas—flow rates ratio (FFR)—was used as a new parameter. The MMP value calculated from the FRR value extrapolation was determined as 37.09 MPa. According to the results obtained, the proposed methodology based on the displacement dynamics can be useful as a criterion for clarifying the MMP value in slim tube displacement experiments.
Crude oil production from conventional oil reservoirs is declining owing to heavy exploitation to meet the global energy market demand which is growing on a yearly basis. Unconventional oil resources, e.g. extra-heavy oil and bitumen, can compensate for this decline if appropriate enhanced oil recovery (EOR) methods are developed to enable economic flow from these resources. The main objective of this study is to set the best practice for the extra-heavy oil production of the Oykino-Altuninsky uplift of the Romashkinskoye oilfield (Tatarstan Republic, Russia). A series of experimental tests are applied on a real unextracted unconsolidated core sample from Romashkinskoye oilfield where the viscosity of the crude oil is above 600,000 cP at reservoir conditions. Different recovery schemes are tested experimentally and sequentially, namely: water flooding, hot water flooding, steam flooding, and finally in-situ combustion (ISC). Furthermore, the complete experimental run is simulated by a standard nonisothermal simulator and the results are compared to the experiments. On contrary to what was expected hot water at 100°C didn’t achieve any recovery from the sample and steam injection recovered only 11,5% of OOIP. ISC-is also known as fire flooding-attained the best recovery which reached 45% after steam flooding. Complete SARA analysis of the original oil and produced oil by steam and ISC is implemented to understand the mechanisms of each process. Numerical modeling is applied to the corresponding laboratory experiments and the results for water, hot water, and steam flooding were in good agreement with the experimental results while the in-situ combustion simulation showed a better recovery factor than experiments. The laboratory and numerical experiments will improve our understanding of the recovery options of Oykino-Altuninsky uplift of the Romashkinskoye oilfield and help the developers to choose the best production sequence for this oilfield particularly. Moreover, the experiments will provide inputs for the field-size numerical model after running more experiments on unconsolidated and consolidated cores.
Thermally enhanced oil recovery methods, such as in situ combustion and steam injection, are generating considerable interest in terms of improving oil reserve exploitation and satisfying oil demand and economic growth. However, the early breakthrough of the in situ combustion front and the significant amount of heat loss associated with steam injection for deeper reservoir applications are the main challenges that require urgent solutions. Further data collection related to the effects of a reservoir’s physical and chemical properties, temperature, and pressure on in situ combustion front propagation and steam injection heat transfer inefficiency would be needed to achieve better reservoir oil recovery. Most studies have focused on the application of catalytic systems and the investigation of minerals’ effects on combustion front stabilization; however, the effect of clay interlayers’ minerals on the performance of in situ combustion is still poorly understood. This paper takes a new look at the role played by the interlayers’ minerals in stabilizing the combustion front using X-ray diffraction (XRD), thermogravimetry (TG), differential scanning calorimetry (DSC) combined with nuclear magnetic resonance (NMR), and combustion tube experiments. The studied samples’ compositions were analyzed by XRD, TG/DSC, and NMR techniques. Meanwhile, the effects of interlayers’ minerals on oil production were screened by combustion tube experiments. The data obtained from this study suggest that clay dispersion within a reservoir would improve oil recovery via in situ combustion, and our study led us to obtain an 80.5% recovery factor. However, the experiments of models with clay interlayers showed less recovery factors, and the model with interlayers led to a 0% recovery factor in the presence of air injection. Meanwhile, the same model in hydrothermal and air injection conditions led to a 13.9% recovery factor. This was due to the hydrothermal effect improving permeability and pore enlargement, which allowed the transfer of heat and matter. Moreover, our study found that clay minerals exhibit excellent catalytic effects on the formation of fuel deposition and the coke oxidation process. This effect was reflected in the significant role played by clay minerals in decreasing the number of heteroatoms by breaking down the C-S, C-N, and C-O bonds and by stimulating the processes of hydrocarbon polymerization during the in situ combustion. Our results add to a growing body of literature related to in situ combustion challenges and underline the importance of a reservoir’s physical parameters in the successful application of in situ combustion.
26 October 2021 in Petroleum Science and Technology
SWCTT (Single-Well Chemical Tracer Test) actively used to determine the reservoir oil saturation as cost effective and quick method. To use this technology, the partition coefficients K and hydrolysis degree H of the tracer which determined experimentally in laboratories are essential for calculation of residual oil and estimation shut-off period of the well. In this paper, FTIR-spectroscopy and pH-metry were proposed for determination of partition coefficient of chemical tracer (ethyl acetate) and hydrolysis degree. Results obtained by these methods showed good correspondence with the data obtained by standard gas chromatographic analysis that confirms its applicability. All of these methods were used for the study of SWCTT parameters for four oilfields with different formation temperatures in the range 27–70 °C and formation water salinities up to 215,015 ppm. It was shown that oil-water partition coefficient of partitioning tracer increases with the rise of salinity. The apparent activation parameters of the hydrolysis reaction were determined by data on the degree of hydrolysis (pH-metry) and the concentration changes of tracer (head space gas chromatography analysis).