Gas injection is one of the prospective methods in the development of unconventional oil reserves. Before implementation in the field, it is necessary to justify the effectiveness of using gas agents in specific object conditions. Experiments of oil displacement on physical models with subsequent numerical modeling can provide the information necessary to justify the feasibility of using gas injection in specific reservoir conditions. This work is devoted to a series of experiments determining the minimum miscibility pressure (MMP) on a slim tube model and the analysis of oil displacement dynamics for various gas compositions, as well as numerical modeling. Displacement experiments were carried out using a recombined oil sample from one of the fields in Western Siberia. The MMP was determined by the classical method of inflection point on the displacement efficiency versus injection pressure curve, which was 34.6 MPa for associated petroleum gas (APG) and 49.9 MPa for methane. The dysnamics of oil displacement for different gas compositions at the same injection pressure showed that APG and carbon dioxide (CO2) are the most effective in the conditions of the studied field. The influence of the gas composition on the gas breakthrough point was also shown. It is revealed that the change in the concentration of the displacing agent in the outgoing separation gas helps define in more detail the process of displacement and the processes implemented in this case for various displacing gas agents. Similarly, it is shown that the displacing efficiency of a gas agent in a miscibility injection mode is affected by the configuration of wells when it is necessary to achieve MMP in reservoir conditions. For the immiscible gas injection mode, no influence of the well configuration was observed.
The paper is devoted to the problem of determining the composition of reservoir gas for gas condensate fields. A methodology for planning gas condensate tests (GCT) is proposed, which allows to assess the possibility of obtaining conditioned samples of reservoir fluid. For the case when it is impossible to take conditioned samples, an approach for their interpretation is developed.At the first step it is proposed to numerically create a set of compositions by adding to the gas of the laboratory “depleted” composition a certain amount of condensate equilibrated to it. The resulting compositions have different condensation onset pressures above the laboratory pressure. Subsequently, for each of the obtained compositions hydrodynamic (HD) modeling should be carried out and the composition for which the obtained values of condensate and gas flow rates and gas oil ratio (GOR) are close to the GCT data should be selected.The analysis of numerical experiments on synthetic flow rate data for a typical well shows a significant dependence of GOR on the component composition and low sensitivity to changes in the main parameters of the HD model. When adjusting the HD model according to the actual data, it is proposed to first select from the set of reconstructed compositions the one for which the model GOR values will be closest to the actual data. The next step, when the selected composition is fixed, is the selection of other parameters of the HD model based on the data of gas and condensate flow rates. This methodology was demonstrated to determine the component composition and main reservoir parameters from GOR data for one real well.
About Me
Oil, gas and bulk metallic glasses.
Hydrodynamic modelling, lab investigations, MGI.
PhD in Physics
Oil, gas and bulk metallic glasses.
Hydrodynamic modelling, lab investigations, MGI.
PhD in Physics