Vertically aligned nanowire arrays, with high surface‐to‐volume ratio and efficient light‐trapping absorption, have attracted much attention for photoelectric devices. In this paper, vertical β‐Ga 2 O 3 nanowire arrays with an average diameter/height of 110/450 nm have been fabricated by the inductively coupled plasma etching technique. Then a metal‐semiconductor‐metal structured solar‐blind photodetector (PD) has been fabricated by depositing interdigital Ti/Au electrodes on the nanowire arrays. The fabricated β‐Ga 2 O 3 nanowire PD exhibits ∼10 times higher photocurrent and responsivity than the corresponding film PD. Moreover, it also possesses a high photocurrent to dark current ratio ( Ilight / Idark ) of ∼10 4 and a ultraviolet/visible rejection ratio ( R260 nm / R400 nm ) of 3.5 × 10 3 along with millisecond‐level photoresponse times.
Micro-light emitting diodes (Micro-LEDs) based on III-nitride semiconductors have become a research hotspot in the field of high-resolution display due to its unique advantages. However, the edge effect caused by inductively coupled plasma (ICP) dry etching in Micro-LEDs become significant with respect to the decreased chip size, resulting in a great reduction in device performance. In this article, sector-shaped GaN-based blue Micro-LEDs are designed and fabricated. Additionally, the device performance of different size Micro-LEDs with passivation are investigated with respect to those without passivation. Several methods have been applied to minimize the etching damage near the edge, including acid-base wet etching and SiO2 passivation layer growth. The room temperature photoluminescence (PL) results demonstrate that the light emission intensity of Micro-LEDs can be significantly enhanced by optimized passivation process. PL mapping images show that the overall luminescence of properly passivated Micro-LEDs is enhanced, the uniformity is improved, and the effective luminescence area is increased. The recombination lifetime of carriers in Micro-LEDs are increased by the usage of passivation process, which proves the reduction in non-radiative recombination centers in Micro-LEDs and improved luminescence efficiency. As a result, the internal quantum efficiency (IQE) is improved from 14.9% to 37.6% for 10 μm Micro-LEDs, and from 18.3% to 26.9% for 5 μm Micro-LEDs.
8 September 2021 in Journal of Sol-Gel Science and Technology
β-Ga2O3 films have been prepared on (0001) sapphire substrates with different off-axis angles toward by sol–gel method and the solar-blind ultraviolet photodetectors (PDs) with metal-semiconductor-metal structure have been fabricated on these films. The effects of off-angled sapphire substrates on the surface morphology and crystal quality of β-Ga2O3 films have been systematically investigated. All the results indicate that to some extent the larger off-angled sapphire substrate could lead to the smoother surface morphology and higher crystal quality of β-Ga2O3 films. Reduction in the numbers of in-plane rotational domains for β-Ga2O3 films on off-angled substrates may result in the above-mentioned improvement, which have been confirmed by x-ray diffraction ϕ-scan. β-Ga2O3 film grown on ∼7° off-angled sapphire substrate has ( ) preferred orientation with the single-domain growth mode. Besides, the performance of β-Ga2O3 PDs fabricated on different off-angled substrates show the same trend with changing the off-axis angles. The β-Ga2O3 PD fabricated on ∼7° off-angled sapphire substrate has excellent optical characteristics with large photocurrent to dark current ratio of 430.53 and high UV–visible rejection ratio of 1.42 × 103. These results would be helpful for improving the crystal-quality of hetero-epitaxy β-Ga2O3 films by using off-angled sapphire substrates and fabricating the cost-effective mass-producible solar-blind ultraviolet PDs by sol–gel method.