A textile material’s electromagnetic interference (EMI) shielding effectiveness mainly depends on the material’s electrical conductivity and porosity. Enhancing the conductivity of the material surface can effectively improve the electromagnetic shielding effectiveness. However, the use of highly conductive materials increases production cost, and limits the enhancement of electromagnetic shielding effectiveness. This work aims to improve the EMI shielding effectiveness (EMSE) by using an ultrathin multilayer structure and the air-permeable textile MEFTEX. MEFTEX is a copper-coated non-woven ultrathin fabric. The single-layer MEFTEX SE test results show that the higher its mass per unit area (MEFTEX 30), the better its SE property between 56.14 dB and 62.53 dB in the frequency band 30 MHz–1.5 GHz. Through comparative testing of three groups samples, a higher electromagnetic shielding effect is obtained via multilayer structures due to the increase in thickness and decrease of volume electrical resistivity. Compared to a single layer, the EMI shielding effectiveness of five layers of MEFTEX increases by 44.27–83.8%. Due to its ultrathin and porous structure, and considering the balance from porosity and SE, MEFTEX 10 with three to four layers can still maintain air permeability from 2942 L/m2/s–3658 L/m2/s.
In response to the growing demand for lightweight yet robust materials in electric vehicle (EV) battery casings, this study introduces an advanced carbon fiber-reinforced composite (CFRC). This novel material is engineered to address critical aspects of EV battery casing requirements, including mechanical strength, electromagnetic interference (EMI) shielding, and thermal management. The research strategically combines carbon composite components with copper-plated polyester non-woven fabric (CFRC/Cu) and melamine foam board (CFRC/Me) into a sandwich-structure composite plus a series of composites with graphite particle-integrated matrix resin (CFRC+Gr). Dynamic mechanical analysis (DMA) revealed that the inclusion of copper-plated fabric significantly enhanced the stiffness, and the specific tensile strength of the new composites reached 346.8 MPa/(g/cm3), which was higher than that of other metal materials used for EV battery casings. The new developed composites had excellent EMI shielding properties, with the highest shielding effectives of 88.27 dB from 30 MHz to 3 GHz. Furthermore, after integrating the graphite particles, the peak temperature of all composites via Joule heating was increased. The CFRC+Gr/Me reached 68.3 °C under a 5 V DC power supply after 180 s. This research presents a comprehensive and innovative approach that adeptly balances mechanical, electromagnetic, and thermal requirements for EV battery casings.
Electromagnetic (EM) radiation is everywhere in this world and galaxy in different forms and levels. In some cases, human beings need to protect themselves from electromagnetic radiations and the same thing is also recommended for electronic devices as well. Lots of studies are there on the shielding of electromagnetic radiation interference using metals, polymers, and minerals. For protecting the human being, textile structures are playing the main role. In the textile material structure itself many types are there; each one is having its unique geometrical shape and design. In this work, the copper/nickel-coated ultrathin nonwoven fabric is prepared like a strip. The 3, 6, and 9 mm thick strips are prepared and laid at different gaps, angles, and layered to study the effect of factors on EM shielding effectiveness as per ASTM D4935-10 standard. The design of experiment has been done to analyze the three factors and three levels of the strip properties having an influence on electromagnetic shielding results. From the findings of the design of experiment (DoE) screening design, the factors are the thickness of the strips, the gap between the strips, and the strips laid angle having a statistically significant effect on electromagnetic shielding effectiveness.
Electromagnetic interference shielding clothing has been developed for people who is sensitive to electromagnetic radiation or workers working under extremely high electromagnetic radiation circumstances. The challenge was developing the fabric with good washability, durability, and air permeability. After three machine washing cycles, the electromagnetic interference shielding effectiveness can drop more than 99% for untreated copper-coated fabric. In this research, the chlorinated poly-para-xylylene (parylene C) encapsulating technology was used to protect the fiber's copper particles. The result shows that the treated sample's washing ability will significantly improve after processing 15 g parylene-C on the copper-coated fabrics. The electromagnetic interference shielding effectiveness can remain at 39.93 dB and 25 dB on average from 30 MHz to 3 GHz after 10 hand washing cycles and 10 machine washing cycles, respectively. The air permeability remains around 1043.6 mm/s for a 15 g parylene-C encapsulated sample. The chemical resistance property was also improved significantly after encapsulation of 15 g parylene-C. For the 15 g parylene-C encapsulated samples, there is less than 3% loss of electromagnetic interference shielding effectiveness after 8 h of immersing into pH = 2 and pH = 12 solution. The overall structure of the 15 g parylene-C encapsulated fabric remains intact after 6000 abrasion cycles. The study presents an effective method for fabricating highly durable, comfortable electromagnetic interference shielding fabric, guaranteeing reliability for technical clothing applications and showing great potential for further development.
26 February 2023 in Journal of Industrial Textiles
This paper investigates the electromagnetic interference shielding effect and wearing comfort properties of a sandwich material consisting of a surface layer, an electromagnetic interference shielding layer, a thermal insulation layer, and a lining layer. The main aim is to research its potential as a winter jacket’s material for shielding electromagnetic radiation and the relationship between single-layer fabric samples and multi-layer sandwich materials under different properties. Experimentally, it is found that the electromagnetic interference shielding effectiveness of the sandwich materials is only determined by the electromagnetic interference shielding layer fabric sample, the other layers’ fabric samples have no significant impact on the electromagnetic interference shielding effect. In this paper, the air permeability of the sandwich materials is 25 to 50% lower than that of the single-layer fabric samples with the lowest air permeability in their combination. And the water vapor resistance of the sandwich materials is 40 to 60% higher than that of the single-layer fabric samples with the highest water vapor resistance in their combination. The thermal resistances of the sandwich materials measured by the Alambeta are lower than those calculated by the sum of the individual layers’ thermal resistance, which may be caused by the reduction in the internal air of the sandwich materials. Finally, the quality index evaluation is used to select the most suitable sandwich material for the winter jacket against electromagnetic radiation, which achieves the purpose of balancing the electromagnetic interference shielding effect and wearing comfort.