Wataru Sakuma

Mr. Wataru Sakuma

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 January 2021 in ACS Nano
Verified
Journal Article
Open access
WSWataru Sakuma
Wataru Sakuma
SYShunsuke Yamasaki
Shunsuke Yamasaki
SFShuji Fujisawa
Shuji Fujisawa
TKTakashi Kodama
Takashi Kodama
JSJunichiro Shiomi
Junichiro Shiomi
TSTsuguyuki Saito
Tsuguyuki Saito
Scalability is a common challenge in the structuring of nanoscale particle dispersions, particularly in the drying of these dispersions for producing functional, porous structures such as aerogels. Aerogel production relies on supercritical drying, which exhibits poor scalability. A solution to this scalability limitation is the use of evaporative drying under ambient pressure. However, the evaporative drying of wet gels comprising nanoscale particles is accompanied by a strong capillary force. Therefore, it is challenging to produce evaporative-dried gels or “xerogels” that possess the specific structural profiles of aerogels such as mesoscale pores, high porosity, and high specific surface area (SSA). Herein, we demonstrate a structure of mesoporous xerogels with high porosity (∼80%) and high SSA (>400 m2 g–1) achieved by exploiting cellulose nanofibers (CNFs) as the building blocks with tunable interparticle interactions. CNFs are sustainable, wood-derived materials with high strength. In this study, the few-nanometer-wide CNFs bearing carboxy groups were structured into a stable network via ionic inter-CNF interaction. The outline of the resulting xerogels was then tailored into a regular, millimeter-thick, board-like structure. Several characterization techniques highlighted the multifunctionality of the CNF xerogels combining outstanding strength (compression E = 170 MPa, σ = 10 MPa; tension E = 290 MPa, σ = 8 MPa), moderate light permeability, thermal insulation (0.06–0.07 W m–1 K–1), and flame self-extinction. As a potential application of the xerogels, daylighting yet insulating, load-bearing wall members can be thus proposed.

7 May 2019 in Frontiers in Chemistry
Verified
Journal Article
Open access
SYShunsuke Yamasaki
Shunsuke Yamasaki
WSWataru Sakuma
Wataru Sakuma
HYHiroaki Yasui
Hiroaki Yasui
KDKazuho Daicho
Kazuho Daicho
TSTsuguyuki Saito
Tsuguyuki Saito
KKKazuyoshi Kanamori
Kazuyoshi Kanamori
Xerogels are defined as porous structures that are obtained by evaporative drying of wet gels. One challenge is producing xerogels with high porosity and large specific surface areas, which are structurally comparable to supercritical-dried aerogels. Herein, we report on cellulose xerogels with a truly aerogel-like porous structure. These xerogels have a monolithic form with porosities and specific surface areas in the ranges of 71–76% and 340–411 m2/g, respectively. Our strategy is based on combining three concepts: (1) the use of a very fine type of cellulose nanofibers (CNFs) with a width of ~3 nm as the skeletal component of the xerogel; (2) increasing the stiffness of wet CNF gels by reinforcing the inter-CNF interactions to sustain their dry shrinkage; and (3) solvent-exchange of wet gels with low-polarity solvents, such as hexane and pentane, to reduce the capillary force on drying. The synergistic effects of combining these approaches lead to improvements in the porous structure in the CNF xerogels.

7 January 2020 in ACS Applied Nano Materials
Verified
Journal Article
Closed access
YNYuki Nakanishi
Yuki Nakanishi
YHYosuke Hara
Yosuke Hara
WSWataru Sakuma
Wataru Sakuma
TSTsuguyuki Saito
Tsuguyuki Saito
KNKazuki Nakanishi
Kazuki Nakanishi
KKKazuyoshi Kanamori
Kazuyoshi Kanamori

12 November 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
WSWataru Sakuma
Wataru Sakuma
SFShuji Fujisawa
Shuji Fujisawa
LBLars Berglund
Lars Berglund
TSTsuguyuki Saito
Tsuguyuki Saito
Cellulose nanofibers (CNFs) have excellent properties, such as high strength, high specific surface areas (SSA), and low coefficients of thermal expansion (CTE), making them a promising candidate for bio-based reinforcing fillers of polymers. A challenge in the field of CNF-reinforced composite research is to produce strong and transparent CNF/polymer composites that are sufficiently thick for use as load-bearing structural materials. In this study, we successfully prepared millimeter-thick, transparent CNF/polymer composites using CNF xerogels, with high porosity (~70%) and high SSA (~350 m2 g−1), as a template for monomer impregnation. A methacrylate was used as the monomer and was cured by UV irradiation after impregnation into the CNF xerogels. The CNF xerogels effectively reinforced the methacrylate polymer matrix, resulting in an improvement in the flexural modulus (up to 546%) and a reduction in the CTE value (up to 78%) while maintaining the optical transparency of the matrix polymer. Interestingly, the composites exhibited flame retardancy at high CNF loading. These unique features highlight the applicability of CNF xerogels as a reinforcing template for producing multifunctional and load-bearing polymer composites.

11 April 2025 in Science Advances
Verified
Journal Article
Open access
NINoriyuki Isobe
Noriyuki Isobe
KTKeiko Tanaka
Keiko Tanaka
SIShun'ichi Ishii
Shun'ichi Ishii
YSYasuhiro Shimane
Yasuhiro Shimane
SOSatoshi Okada
Satoshi Okada
HNHidetaka Nomaki
Hidetaka Nomaki
To mitigate marine pollution from single-use plastics, it is crucial to transition to next-generation commodity materials that are derived from biomass and are recyclable and marine biodegradable even at abyssal depths in case of the accidental release to the ocean. Here, we develop an optically transparent millimeter-thick paperboard called transparent paperboard (tPB) through dissolution and coagulation of cellulose. The tPB is made entirely of pristine cellulose and compositionally identical to paper. A cup-shaped tPB can hold just-boiled water without an internal film coating because of its high wet tensile properties and anisotropic thermal properties. In addition, the spent tPB is material recyclable in a closed system, where all chemicals and water are also recyclable. Furthermore, the marine biodegradability of tPB across shallow to abyssal depths is confirmed by on-site degradation tests and metagenomic analyses. Hence, tPB is expected to serve as a key fully circular commodity material in sustainable societies of the future.

11 September 2025 in ChemRxiv
Verified
Preprint
Open access
PDF file
XHXinyi Hou
Xinyi Hou
JKJunki Kotsuka
Junki Kotsuka
WSWataru Sakuma
Wataru Sakuma
TITomoki Ito
Tomoki Ito
YKYuto Kaku
Yuto Kaku
TSTsuguyuki Saito
Tsuguyuki Saito
It is important to decrease considerable heat loss in buildings and vehicles for establishing a low-carbon society. Transparent insulators applicable for windows can effectively reduce such heat loss. Conventional options for transparent insulators are silica aerogels that provide both optical transparency and thermal insulation benefits. However, silica aerogels are prepared via an unscalable supercritical drying process and are mechanically brittle, which restricts their practical use. In this study, we developed transparent and thermally insulating “cryogels” comprising mechanically strong cellulose nanofibers (CNFs). The term cryogels refers to porous structures prepared via practical freeze drying of wet gels. In the synthesis, the agglomeration of nanofibers in a wet CNF gel during the freezing step was suppressed by rapidly freezing tert-butyl alcohol (t-BuOH)-exchanged wet gels with a stiffened network skeleton. The visible-light transmittance values of the cryogels ranged from approximately 80−90%, and the thermal conductivity reached as low as 0.023 W/m·K. We also extended this approach to chitin nanofibers (ChNFs) to demonstrate its universality. The resulting ChNF cryogels exhibited similar high transparency (~80%) and low conductivities (0.022 W/m·K). These cryogels, with the potential for scalable production, are suitable as interspace materials for use in double-glazed windows, offering a promising solution for sustainable transparent insulators in energy-efficient building and vehicle applications.