SITI ANIS KHAIRANI ALWI

Ms. SITI ANIS KHAIRANI ALWI


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 January 2020 in Micromachines
Verified
Journal Article
Open access
PDF file
RZROZALINA ZAKARIA
ROZALINA ZAKARIA
NZNur Aina'a Mardhiah Zainuddin
Nur Aina'a Mardhiah Zainuddin
SRSofiah Athirah Raya
Sofiah Athirah Raya
SASITI ANIS KHAIRANI ALWI
SITI ANIS KHAIRANI ALWI
TAToni Anwar
Toni Anwar
IAIraj Sadegh Amiri
Iraj Sadegh Amiri
A single-mode optical fiber sensor uses surface plasmon resonance (SPR) with a bimetallic silver–copper (Ag–Cu) coating compared to a single layer of Ag and Cu itself. Bimetallic Ag–Cu sensors are constructed by simple fabrication on a side-polished optical fiber, followed by an electron beam evaporation of Ag and Cu films. For this investigation, the thickness of the single Ag layer was set to 30 nm and the single Cu layer was set to 30 nm; whereas for the bimetallic combined Ag–Cu layer the thickness of Ag was 7 nm and Cu 23 nm. The sensor performance was analyzed and compared experimentally and numerically using the COMSOL Multiphysics. A white light source was used with a broad optical bandwidth to provide a range of wavelengths to the optical fiber. The characteristics of the thin layers of Ag, Cu, and Ag–Cu as alcohol sensors were evaluated. We found that Cu was the most sensitive metallic layer compared to the Ag and the bimetallic Ag–Cu layers. For a 100% alcohol concentration, Cu showed a sensitivity of 425 nm/RIU followed by the bimetallic Ag–Cu layer with 108.33 nm/RIU, whereas the Ag layer was not detected. Interestingly, sensitivity reached saturation beyond the 20 nm thick layer of Ag. This shows that the Cu and the bimetallic Ag–Cu layers are suitable for an alcohol-based optical sensor.

11 November 2021 in Micromachines
Verified
Journal Article
Open access
PDF file
SASITI ANIS KHAIRANI ALWI
SITI ANIS KHAIRANI ALWI
SHSyaza Nafisah Hisamuddin
Syaza Nafisah Hisamuddin
SAShahino Mah Abdullah
Shahino Mah Abdullah
AAAfiq Anuar
Afiq Anuar
ARAtiqah Husna Abdul Rahim
Atiqah Husna Abdul Rahim
Azzuliani SupangatAzzuliani Supangat
Azzuliani Supangat
In this work, we presented experimental observation on solution-processed bulk heterojunction organic photodiode using vanadyl 2,11,20,29-tetra tert-butyl 2,3 naphthalocyanine (VTTBNc) as a p-type material. VTTBNc is blended with two different acceptors, which are PC61BM and PC71BM, to offer further understanding in evaluating the performance in organic photodiode (OPD). The blend film of VTTBNc:PC71BM with a volumetric ratio of 1:1 exhibits optimized performance in the VTTBNc blend structure with 2.31 × 109 Jones detectivity and 26.11 mA/W responsivity at a −1 V bias. The response and recovery time of VTTBNc:PC71BM were recorded as 241 ms and 310 ms, respectively. The light absorption measurement demonstrated that VTTBNc could extend the light absorption to the near-infrared (NIR) region. The detail of the enhancement of the performance by adding VTTBNc to the blend was further explained in the discussion section.