We study the interplay between turbulent heating, mixing, and radiative cooling in an idealized model of cool cluster cores. Active galactic nuclei (AGN) jets are expected to drive turbulence and heat cluster cores. Cooling of the intracluster medium (ICM) and stirring by AGN jets are tightly coupled in a feedback loop. We impose the feedback loop by balancing radiative cooling with turbulent heating. In addition to heating the plasma, turbulence also mixes it, suppressing the formation of cold gas at small scales. In this regard, the effect of turbulence is analogous to thermal conduction. For uniform plasma in thermal balance (turbulent heating balancing radiative cooling), cold gas condenses only if the cooling time is shorter than the mixing time. This condition requires the turbulent kinetic energy to be ≳ the plasma internal energy; such high velocities in cool cores are ruled out by observations. The results with realistic magnetic fields and thermal conduction are qualitatively similar to the hydrodynamic simulations. Simulations where the runaway cooling of the cool core is prevented due to mixing with the hot ICM show cold gas even with subsonic turbulence, consistent with observations. Thus, turbulent mixing is the likely mechanism via which AGN jets heat cluster cores. The thermal instability growth rates observed in simulations with turbulence are consistent with the local thermal instability interpretation of cold gas in cluster cores.
Energy recovery has been achieved in a multipass linear accelerator, demonstrating a technology for more compact particle accelerators operating at higher currents and reduced energy consumption. Energy delivered to the beam during the first four passes through the accelerating structure was recovered during four subsequent decelerating passes. High-energy efficiency was achieved by the use of superconducting accelerating cavities and permanent magnets. The fixed-field alternating-gradient optical system used for the return loop successfully transported electron bunches of 42, 78, 114, and 150 MeV in a common vacuum chamber. This new kind of accelerator, an eight-pass energy recovery linac, has the potential to accelerate much higher current than existing linear accelerators while maintaining small beam dimensions and consuming much less energy per electron.
The hypothesis that the central nervous system (CNS) makes use of synergies or movement primitives in achieving simple to complex movements has inspired the investigation of different types of synergies. Kinematic and muscle synergies have been extensively studied in the literature, but only a few studies have compared and combined both types of synergies during the control and coordination of the human hand. In this paper, synergies were extracted first independently (called kinematic and muscle synergies) and then combined through data fusion (called musculoskeletal synergies) from 26 activities of daily living in 22 individuals using principal component analysis (PCA) and independent component analysis (ICA). By a weighted linear combination of musculoskeletal synergies, the recorded kinematics and the recorded muscle activities were reconstructed. The performances of musculoskeletal synergies in reconstructing the movements were compared to the synergies reported previously in the literature by us and others. The results indicate that the musculoskeletal synergies performed better than the synergies extracted without fusion. We attribute this improvement in performance to the musculoskeletal synergies that were generated on the basis of the cross-information between muscle and kinematic activities. Moreover, the synergies extracted using ICA performed better than the synergies extracted using PCA. These musculoskeletal synergies can possibly improve the capabilities of the current methodologies used to control high dimensional prosthetics and exoskeletons.
Embedded systems are prone to leak information via side-channels associated with their physical internal activity, such as power consumption, timing, and faults. Methods proposed to disassemble instruction level activity via side-channel leakage have not addressed issues related to pipelined multi-clock-cycle architectures, nor have they proven the robustness or reliability of published techniques. In this work, software sequences being executed on a general-purpose pipelined computing platform are identified and instructions that make up these sequences based on hardware utilization are classified. A dynamic programming algorithm is applied to detect the boundaries of instructions in a sequence with 100% recovery rate. A unique aspect of this technique is the use of multiple power supply pin measurements to increase precision and accuracy. To demonstrate the robustness of this technique, power leakage data from ten target FPGAs synthesized with a prototype of the pipelined architecture was analyzed and classification accuracies averaging 99% were achieved. Classification accuracies were also verified when a target FPGA was subjected to different controlled temperatures. To demonstrate the reliability of the presented technique, the classification accuracies are shown to remain comparable (97%) even when using discrete (ASIC) microcontrollers with pipelined architectures.
Evaluating and debugging solar panel-driven systems is a cumbersome process. The system must be deployed in the wild, software and hardware bugs identified remotely, and the development cycle must be repeated to build a robust system. Emulation platforms for solar panels offer a plausible remedy, however, existing systems have narrow operating range and are not portable. To address these shortcomings, we design, implement, and evaluate the SunaPlayer, a solar panel emulation platform that supports a wide operating current range (430 micro-amps to 1.89 amps) and voltage range (0.02 V to 9.8 V), and can be powered using batteries. SunaPlayer uses a high gain analog device, a PNP darlington transistor, a multi-scale driving and measurement circuit, and a novel state machine based proportional-integral-differential controller to build an accurate non-linear model of the solar panel. We have implemented a fully functional SunaPlayer prototype, and demonstrate that it can emulate a wide range of solar panels with high accuracy, low latency, high sensitivity, and low power consumption. The design methodology for the SunaPlayer can be used to build systems that model hard to emulate non-linear devices.