CO₂–brine–rock interaction impacts the behavior and efficiency of CO₂ geological storage; a thorough understanding of these impacts is important. A lot of research in the past has considered the nature and impact of CO₂–brine–rock interaction and much has been learned. Given that the solubility and rate of mineralization of CO₂ in brine under reservoir conditions is slow, free and mobile, CO₂ will be contained in the reservoir for a long time until the phase of CO₂ evolves. A review of independent research indicates that the phase of CO₂ affects the nature of CO₂–brine–rock interaction. It is important to understand how different phases of CO₂ that can be present in a reservoir affects CO₂–brine–rock interaction. However, the impact of the phase of CO₂ in a CO₂–brine–rock interaction has not been given proper attention. This paper is a systematic review of relevant research on the impact of the phase of CO₂ on the behavior and efficiency of CO₂ geological storage, extending to long-term changes in CO₂, brine, and rock properties; it articulates new knowledge on the effect of the phase of CO₂ on CO₂–brine–rock behavior in geosequestration sites and highlights areas for further development.

Climate change has become a global issue and is predicted to impact less-developed regions, such as sub-Saharan Africa, severely. Innovative, sustainable renewable energy systems are essential to mitigate climate change’s effects and unlock the region’s potential, especially with the increasing energy demands and population growth. The region relies heavily on fossil fuels, which calls for urgent action towards energy security and expansion. Hybrid floating solar photovoltaic-hydropower (FPV-HEP) technology has emerged as a cost-effective and transformative solution to accelerate the low-carbon energy transition in sub-Saharan Africa. The technology combines solar panels with existing hydropower infrastructure, ensuring energy security while reducing carbon emissions. This technology offers several benefits over conventional ground-mounted solar systems, including efficient land utilization, energy generation, and water conservation. However, its adoption remains challenging due to technical complexities and evolving regulatory frameworks. Despite these challenges, Nigerian energy professionals have preferred renewable alternatives, mainly distributed solar PV and FPV-HEP plants. This collective embrace of FPV and renewables reflects a growing understanding of their critical role in mitigating climate change through sustainable energy practices. This research aims to contribute to the existing body of knowledge and assist policymakers in making informed decisions on adopting this technology. It also stimulates further research on this topic, offering a new potential solution to the ever-increasing demand for green energy in the region to meet their sustainable development needs.

This perspective paper elaborates on how the burden of environmental issues on public health and the economy led China’s government to declare its revised environmental policies or “war on pollution”. It explains the importance of photovoltaic solar (PV), electric vehicles (EV), and carbon capture and storage (CCS) in helping China to mitigate its environmental concerns while maintaining economic growth. China already leads PV solar and EV manufacturing; however, it has not made a tangible contribution to CCS technology yet. On the other hand, CCS is far behind its envisaged role in contributing to the reduction of greenhouse gas emissions and supporting countries to meet their net carbon zero targets. China’s existing coal power plants are good candidates to be retrofitted with CCS. Similar to PV and EV technologies, China could influence this technology globally, by reducing the uncertainties, demonstrating the viability, and driving the costs lower. China’s revised policies have been effective and shown global impacts, but their implementations remain as strong as the political will behind them.

This paper provides an in-depth review of research developments on a common phenomenon in oil and gas exploration: sand production. Due to its significant impact to reservoir productivity and production efficiency, sand production has been widely researched in recent years. This paper focused on the review of historical progress in experimental and analytical studies which helped to understand the nature of the sanding mechanism and identify conditions that favour the process. Collation of the experimental data and analytical solutions and formulations enabled the authors to comment on effectiveness and also limitations of the existing experimental protocols and analytical models. Sand production models were then grouped into categories based on initiation of sanding, rate and amount of sanding as well as the failure criterion incorporated in their formulation so that it will be more convenient for future researchers to identify and adopt an appropriate model for their own research. The review also confirms that there are still some aspects of sand production requiring further investigation, and maybe a hybrid approach combining experimental, analytical and numerical methods could be the best solution for future explorations.

Urmia Lake (UL) is the sixth-largest saltwater lake in the world; however, there is a dearth of geotechnical studies on this region. Geotechnical characteristics of a site are considered important from different engineering perspectives. In this research, the results of 255 laboratory tests and the data of 55 in situ tests were used to determine the geotechnical properties of sediment in UL. The changes of parameters in depth are presented in this study. The results indicate that compressibility, initial void ratio, water content, over-consolidated ratio (OCR), and sensitivity have larger values near the lake bed. Moreover, increasing the sediment depth leads to significant reductions in these values. According to the sediment strength analysis through the vane shear and standard penetration tests and the unit weight of sediments, there is an increasing trend caused by the increased depths of layers. Diverse applied correlations are proposed and can be used as preliminary estimates in similar types of sediments in engineering projects as well as scientific studies. Furthermore, undrained shear strength and compression index trends in depth and the Su/σ’_v Curve against OCR are compared with the literature, and the results reveal similar trends in similar sediments. The main minerals identified in these sediments include calcite, dolomite, quartz, calcium chloride, and halite. The salinity of the lake water is caused by the presence of calcium chloride and halite minerals. The Cao factor observed in chemical compounds can have a significant impact on the cohesion of the soil particles. This research provides comprehensive information on the geotechnical characteristics of UL. Moreover, the results of this study show that UL Sediments are soft and sensitive, especially in shallow depths, and they contain a significant amount of organic content; therefore, it is recommended to use suitable improvement methods in future geotechnical and structural designs. This study and similar surveys can help prepare the groundwork for designing safer marine structures.