Svetlana Obukhova

Dr. Svetlana Obukhova

Moscow State University of Civil Engineering, Moscow, Moskva, Russia
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 May 2022 in Buildings
Verified
Journal Article
Open access
PDF file
ALAzariy Lapidus
Azariy Lapidus
EKEvgeniy Korolev
Evgeniy Korolev
DTDmitry Topchiy
Dmitry Topchiy
TKTatyana Konstantinovna Kuzmina
Tatyana Konstantinovna Kuzmina
SOSvetlana Obukhova
Svetlana Obukhova
NSNikolai Shestakov
Nikolai Shestakov
The modern rhythm of human life leads to well-known problems, which are air, water and soil pollution and climate warming. An increase in the power of industries and vehicles leads not only to atmospheric pollution by-products of incomplete fuel combustion but also to various microscopic particles that form aerosols, which carry an obvious danger to human health and also pollute the buildings’ facades. An environmentally friendly building material with a hybrid method “Nano-titania gradient” was developed. This method consists of forming a gradient of n-TiO2 particles concentration in the composite since the physical properties of the composite are always inextricably linked to the geometry. To increase the efficiency of the photocatalytic process, a method of surface sensitization of titanium dioxide with the use of graphene oxide was proposed, which contributed to an increase in the overall photosensitivity. Thus, the decomposition of nitrogen oxide by volume with the modified surface increased by 27% in comparison with the classic titanium dioxide, and the decomposition of volatile organic substances increased by 32%. It was found that for the facade plate made with surface-sensitized TiO2, the process of self-cleaning is completed after 3 h after the irradiation start. The modern rhythm of human life leads to well-known problems, which are air, water and soil pollution and climate warming. Using the theory of percolation, the concentration range of the photocatalyst content was calculated. To facilitate the material, waste cellulose was introduced. To increase the efficiency of the photocatalytic process, a method of surface sensitization of titanium dioxide (SS TiO2) with the use of graphene oxide was proposed. The analysis of the experimental-statistical models of the compressive strength shows that the optimum content of TiO2 was in the range from 0.8 to 1.1%, and cellulose from 0.4 to 0.8%, the optimum content of SS TiO2 was in the range from 0.7 to 1.1%, and cellulose from 0.4 to 0.8%. Analysis of the experimental and statistical model of the bending strength shows that the optimal content of TiO2 and SS TiO2 was in the range of 0.6 to 1.0%, and cellulose from 0.4 to 0.8%. When studying the structure of composites, it was found that titanium dioxide was sorbed on the surface of swollen cellulose fibers and remained there after the process of cement hydration. The effectiveness of the method of surface sensitization of titanium dioxide by combining it with graphene oxide was shown. Thus, the decomposition of nitrogen oxide by volume with the modified surface increased by 27% in comparison with the classic titanium dioxide, and the decomposition of volatile organic substances increased by 32%. It was found that for the facade plate made with surface-sensitized TiO2, the process of self-cleaning was completed after 3 h after the irradiation start.

30 July 2023 in Materials
Verified
Journal Article
Open access
PDF file
SOSvetlana Obukhova
Svetlana Obukhova
EKEvgeniy Korolev
Evgeniy Korolev
ABAngelina Budkina
Angelina Budkina
The research is devoted to developing the production of crumb rubber-modified bitumen with improved stability. It has been established that the most suitable semi-empirical coefficient for determining the compatible plasticizer to crumb rubber is based on the ratio of paraffin-naphthenic compounds to resinous-asphaltene compounds. With the help of differential scanning calorimetry, temperature regimes of crumb rubber destruction and preparation of rubber-containing components (210 °C) were studied and determined. It was established that determining the dynamic viscosity of hydrocarbon concentrates with crumb rubber on a rotary viscometer is not applicable due to elastic components, making it difficult to measure and obtain reliable data. The most suitable method is the shear viscosity method. Using fluorescent microscopy, it was established that the formation of a branched structure of crumb rubber is achieved in the waste industrial oil, indicating devulcanization processes. It was found that hydrocarbon plasticizer with high naphthenic oil content is the most compatible with crumb rubber. Synthetic wax was found to be of greater interest as a devulcanizing/stabilizing agent, and its application in an amount of 3% allows the formation of a stable CRMB structure and stabilizes the devulcanization process.

6 December 2023 in Materials
Verified
Journal Article
Open access
PDF file
SOSvetlana Obukhova
Svetlana Obukhova
EKEvgeniy Korolev
Evgeniy Korolev
VGVitaly Gladkikh
Vitaly Gladkikh
The use of polymer-modified binders in asphalt concrete makes it possible to increase the efficiency and durability of highways. However, at present, there is an important and unresolved problem in this area, making it impossible to fully exploit the potential of modified binders. This is a tendency of aging processes that leads to the premature destruction of the pavement. In many literary sources, it is reported that reasons are related to the peculiarity of the chemical composition and occur at the submicron level. Therefore, the influence of single-walled carbon nanotubes has been studied for a better understanding of aging processes. The aging processes of the RTFOT (rolling thin film oven test) and PAV (pressure aging vessel) modified with SBS (styrene–butadiene–styrene) polymer, single-walled carbon nanotubes, and waste industrial oil were simulated in a laboratory furnace. Microstructural features were studied using the method of infrared spectral analysis. The dependences of viscoelastic properties on the component composition of binders were investigated. The optimal content of single-walled carbon nanotubes (0.001%), SBS (styrene–butadiene–styrene) polymer (3.5%), and waste industrial oil (4%) in the binder composition was established, which synergistically improved the performance of the modified binder from PG (52-22) (performance grade) to PG (64-34). It was established that single-walled carbon nanotubes provide improvement in the durability parameter ∆Tc binder by 150%, improved relaxation properties at low temperatures, and resistance to fatigue damage.

24 September 2024 in Materials
Verified
Journal Article
Open access
PDF file
SOSvetlana Obukhova
Svetlana Obukhova
ABAngelina Budkina
Angelina Budkina
EKEvgeniy Korolev
Evgeniy Korolev
VGVitaly Gladkikh
Vitaly Gladkikh
The issue of forming a reliable and sustainable structure of crumb-rubber-modified binder is an important scientific and technical task. The quality of this task will increase the technical and economic efficiencies of road construction materials. This work is dedicated to developing a scientifically justified method of directed thermomechanical devulcanization, which ensures the solubility of the crumb rubber in the complex structure of a polydisperse composite material, preventing the formation of aggregates consisting of unsaturated crumb rubber particles, whose elastic aftereffect causes intensive cracking, especially during low-temperature road operations. The novelty in the first part of this article is due to the fact that, for the first time, the quantitative ratio of the polymer component in the crumb rubber was experimentally determined. The ratio of the polymer component to the total content of the other rubber components in the crumb rubber (CR) was determined to be, on average, 93.3 ± 1.8%. The stabilities of the compositions of crumb rubber from different batches were experimentally studied. The nature of the polymer component in the crumb rubber was determined. A hypothesis was formulated to obtain a thermodynamically stable and sustainable binder modified with crumb rubber. To evaluate the compatibility of hydrocarbon plasticizers with the studied CR samples, the following semi-empirical and thermodynamic compatibility parameters were calculated: Hildebrand solubility parameters based on evaporation energy and surface tension, Barstein’s compatibility parameter |X|, Traxler coefficient, and the mass ratio of paraffin naphthene:asphaltenes. It was shown that for the substances under study, it is advisable to justify the choice of plasticizer based on chemical compatibility criteria. It was established that a supramolecular plasticization mechanism occurs in the “hydrocarbon plasticizer–crumb rubber” systems under consideration. In the development of the crumb-rubber-modified binder, it was found that the use of activated crumb rubber (ACR) from large tires does not ensure the achievement of a stable and resilient structure of the crumb-rubber-modified bitumen.

31 January 2023 in C
Verified
Journal Article
Open access
PDF file
SOSvetlana Obukhova
Svetlana Obukhova
EKEvgeniy Korolev
Evgeniy Korolev
The up-to-date carbon nanoparticle application in materials science and composites is mostly represented by controlling of different methods of structure formation including incorporation of nanomaterials or nano-modifiers. The efficiency of such methods depends on disagglomeration and the distribution degree of the carbon nanoparticle within a dispersion medium, which are critical parameters to produce a composite with improved performance. At the same time, common approaches such as a surface activation or using surfactants do not guarantee a homogeneous dispersion of carbon nanoparticles. This research reports on a theoretical analysis of physical processes which take place during the ultrasonic treatment which is a widely used method for dispersion of nanomaterials. The experimental data demonstrate an efficiency of the proposed method and prove the theoretical assumptions. The theoretical analysis performed in this study can be applied to implement and scale-up the process using sonicators. It was established that ultrasonic treatment has a more intensive effect in an organic hydrocarbon medium. So, in industrial oil, the heating rate from ultrasonification is 20 °C/min, in residual selective purification extract, it is 33 °C/min. For aqueous systems, the heating rate from ultrasonification is significantly lower and amounts to 2 °C /min for suspensions with Sulfanol and 11 °C/min for suspensions with ViscoCrete 2100. It was established that in the studied dispersed systems (aqueous solutions with surfactants and organic medium), there is no directly proportional dependence of the amount of heating of suspensions on the duration of ultrasound dispersion (USD), which is caused by ultrasonic dispersion not under adiabatic conditions, as well as the dependence of absorption coefficient of ultrasonic energy for dispersed systems on parameters of system structure.

18 October 2024 in Materials
Verified
Journal Article
Open access
PDF file
SOSvetlana Obukhova
Svetlana Obukhova
ABAngelina Budkina
Angelina Budkina
EKEvgeniy Korolev
Evgeniy Korolev
VGVitaly Gladkikh
Vitaly Gladkikh
The issue of forming a reliable and stable structure of a crumb-rubber-modified binder is an important scientific and technical task. The authors supplemented existing concepts of the mechanism of effective interaction with rubber crumb by introducing a preliminary first stage: controlled partial physical destruction of rubber crumb—producing rubber reclaim. Proposed physical methods of rubber crumb destruction include high shear force (roll mills), high temperature, and a plasticizing medium. The controllability and degree of devulcanization of rubber were determined by acetone-chloroform extraction in different time intervals. The degree of devulcanization of rubber in the rubber reclaim was found to be 22 ± 0.24%, with stability over 14 days. It was found that the size of the particles of the rubber reclaim in the bitumen is less than 2 µm. The properties of the structure of the binder modified with rubber reclaim, characterizing the stability and sustainability, have been studied and established. The developed modified binders are stable in storage. Rheological parameters of the structure characterizing intermolecular interaction, such as shear stability for original and RTFOT-aged, modified bitumen, meet requirements of the state standard at test temperature 64 °C. The elastic structural component of the crumb-rubber-modified binder, as indicated by the relative irreversible deformation parameter J3,2, does not exceed 2.6 kPa (<4.5 kPa) at 64 °C. Additionally, it was determined that the rheological structural parameter for fatigue resistance, which characterizes the durability of road pavement under intensive operational conditions, does not exceed 4699 kPa (<5000 kPa) at 16 °C. The use of 10% rubber reclaim combined with waste frying oil provided the opportunity to obtain a modified binder with a stable and sustainable structure without the introduction of additional stabilizers and agents. Test results showed that the overall performance characteristics of the modified binder meet the 64(S)-40 grade standards.