Second phase particles (SPP) play an essential role in controlling grain size and properties of polycrystalline nickel base superalloys. The understanding of the behavior of these precipitates is of prime importance in predicting microstructure evolutions. The dissolution kinetics of the primary precipitates during subsolvus solution treatments were investigated for three nickel base superalloys (René 65, and ). A temperature-time codependency equation was established to describe the evolution of primary precipitates of each material using experimental data, the - software and the Johnson–Mehl–Avrami–Kolmogorov (JMAK) model. The dissolution kinetics of precipitates was also simulated using the level-set (LS) method and the former phenomenological model. The precipitates are represented using an additional LS function and a numerical treatment around grain boundaries in the vicinity of the precipitates is applied to reproduce their pinning pressure correctly. Thus, considering the actual precipitate dissolution, these simulations aim to predict grain size evolution in the transient and stable states. Furthermore, it is illustrated how a population of Prior Particle Boundaries (PPB) particles can be considered in the numerical framework in order to reproduce the grain size evolution in the powder metallurgy N19 superalloy. The proposed full-field strategy is validated and the obtained results are in good agreement with experimental data regarding the precipitates and grain size.
1 August 2020 in Computer Methods in Applied Mechanics and Engineering
In numerous polycrystalline materials, grain size is controlled by second phase particles (SPPs) that hinder the grain boundaries (GBs) by pinning mechanisms. The Smith–Zener pinning (SZP) model describes the physical interaction between SPPs and GBs. Both of them can evolve when applying a heat treatment to the material. As industrial forging processes involve hot deformation steps near the solvus temperature, it is thus of prime importance to characterize the evolution of the SPPs due to their impact on the final microstructure, notably on the grain size. The level set (LS) method is classically used to describe the influence of SPPs on grain growth (GG) by considering the simulated particles as inert and represented by static holes in the used finite element (FE) mesh. A new formalism to model GG mechanism under the influence of the SZP phenomenon, able to take into account evolving particles is proposed. It involves the representation of SPPs by a LS function and a particular numerical treatment around the grain interfaces encountering SPP, making possible the modelling of SPPs evolution without altering the undergoing pinning pressure. Validation and comparison of the new method regarding previous FE-LS formulation in 2D and 3D simulations and an application on GG under the influence of dissolving particles are described.
Grain growth is a well-known and complex phenomenon occurring during annealing of all polycrystalline materials. Its numerical modeling is a complex task when anisotropy sources such as grain orientation and grain boundary inclination have to be taken into account. This article presents the application of a front-tracking methodology to the context of anisotropic grain boundary motion at the mesoscopic scale. The new formulation of boundary migration can take into account any source of anisotropy both at grain boundaries as well as at multiple junctions (MJs) (intersection point of three or more grain boundaries). Special attention is given to the decomposition of high-order MJs for which an algorithm is proposed based on local grain boundary energy minimisation. Numerical tests are provided using highly heterogeneous configurations, and comparisons with a recently developed Finite-Element Level-Set (FE-LS) approach are given. Finally, the computational performance of the model will be studied comparing the CPU-times obtained with the same model but in an isotropic context.
8 March 2021 in Modelling and Simulation in Materials Science and Engineering
A new method for the simulation of evolving multi-domains problems has been introduced in previous works and further developed in parallel in the context of isotropic grain growth (GG) with no consideration for the effects of the stored energy (SE) due to dislocations. The methodology consists in a new front-tracking approach where one of the originality is that not only interfaces between grains are discretized but their bulks are also meshed and topological changes of the domains are driven by selective local remeshing operations performed on the finite element (FE) mesh. In this article, further developments and studies of the model will be presented, mainly on the development of a model taking into account grain boundary migration (GBM) by SE. Further developments for the nucleation of new grains will be presented, allowing to model dynamic recrystallization (DRX) and post-dynamic recrystallization (PDRX) phenomena. The accuracy and the performance of the numerical algorithms have been proven to be very promising in Florez et al (2020). Here the results for multiple test cases will be given in order to validate the accuracy of the model taking into account GG and SE. The computational performance will be evaluated for the DRX and PDRX mechanisms and compared to a classical FE framework using a level-set formulation.
1 July 2021 in Modelling and Simulation in Materials Science and Engineering
The parallelization of algorithms is an essential step towards the optimization of large-scale computations. The modeling of evolving multi-domain problems is not an exception to this rule, specifically when it is applied to the context of microstructural evolutions. A new method for the simulation of evolving microstructures has been introduced in a previous work, consisting on a modified front-tracking approach where the main originality is that not only interfaces between domains are discretized but also their bulks. This new model has obtained promising results in terms of accuracy and numerical performance, however, it has been implemented in a sequential environment and is not readily usable in modern HPC units for parallel computations. This article proposes a parallel implementation for the new model using a distributed-memory approach developed with the standard protocol ‘message passing interface’. The new parallel methodology has been tested in an HCP station with up to 140 cores for problems involving motion by curvature flow in polycrystals, i.e. by considering pure grain growth. Good results were obtained in terms of CPU-time and speed-up for large polycrystals (with up to 560 000 initial grains), showing that this model can lead to fast and/or large computations of microstructural evolutions in a full-field context.