Second phase particles (SPP) play an essential role in controlling grain size and properties of polycrystalline nickel base superalloys. The understanding of the behavior of these precipitates is of prime importance in predicting microstructure evolutions. The dissolution kinetics of the primary precipitates during subsolvus solution treatments were investigated for three nickel base superalloys (René 65, and ). A temperature-time codependency equation was established to describe the evolution of primary precipitates of each material using experimental data, the - software and the Johnson–Mehl–Avrami–Kolmogorov (JMAK) model. The dissolution kinetics of precipitates was also simulated using the level-set (LS) method and the former phenomenological model. The precipitates are represented using an additional LS function and a numerical treatment around grain boundaries in the vicinity of the precipitates is applied to reproduce their pinning pressure correctly. Thus, considering the actual precipitate dissolution, these simulations aim to predict grain size evolution in the transient and stable states. Furthermore, it is illustrated how a population of Prior Particle Boundaries (PPB) particles can be considered in the numerical framework in order to reproduce the grain size evolution in the powder metallurgy N19 superalloy. The proposed full-field strategy is validated and the obtained results are in good agreement with experimental data regarding the precipitates and grain size.
4 March 2022 in International Journal of Plasticity
In numerous polycrystalline materials, grain size is controlled by second phase particles (SPPs) that hinder the grain boundaries (GBs) by pinning mechanisms. The Smith–Zener pinning (SZP) model describes the physical interaction between SPPs and GBs. Both of them can evolve when applying a heat treatment to the material. As industrial forging processes involve hot deformation steps near the solvus temperature, it is thus of prime importance to characterize the evolution of the SPPs due to their impact on the final microstructure, notably on the grain size. The level set (LS) method is classically used to describe the influence of SPPs on grain growth (GG) by considering the simulated particles as inert and represented by static holes in the used finite element (FE) mesh. A new formalism to model GG mechanism under the influence of the SZP phenomenon, able to take into account evolving particles is proposed. It involves the representation of SPPs by a LS function and a particular numerical treatment around the grain interfaces encountering SPP, making possible the modelling of SPPs evolution without altering the undergoing pinning pressure. Validation and comparison of the new method regarding previous FE-LS formulation in 2D and 3D simulations and an application on GG under the influence of dissolving particles are described.
Dynamic recrystallization is one of the main phenomena responsible for microstructure evolution during hot forming. Consequently, obtaining a better understanding of dynamic recrystallization mechanisms and being able to predict them is crucial. This paper proposes a full-field numerical framework to predict the evolution of subgrain structures upon grain growth, continuous dynamic recrystallization, and post-dynamic recrystallization. To be able to consider a subgrain structure, two strategies are proposed. One relies on a two-step tessellation algorithm to generate a fully substructured microstructure. The second strategy enables for the simulation of the formation of new subgrains during hot deformation. Using these tools, the grain growth of a fully substructured microstructure is modeled. The influence of microstructure topology, subgrain parameters, and some remaining stored energy due to plastic deformation is discussed. The results highlight that the selective growth of a limited number of subgrains is observed only when mobility is a sigmoidal function of disorientation. The recrystallization kinetics predicted with different criteria for discrimination of recrystallized grains are quantitatively compared. Finally, the ability of the framework to model continuous dynamic and post-dynamic recrystallization is assessed upon a case study representative of the hot extrusion of a zircaloy-4 billet ( °C). The influence of grain boundary properties and nucleation rules are quantified to evaluate the model sensitivity and suitability. Application of these numerical tools to other thermomechanical conditions and microstructures will be presented in an upcoming article.