Peng Hu

Dr. Peng Hu


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 February 2026 in Materials
Verified
Journal Article
Open access
PDF file
HJHaichuan Jia
Haichuan Jia
XGXin Gao
Xin Gao
雨张雨昕 张
雨昕 张
XMXianghe Meng
Xianghe Meng
XHXinyuan Huang
Xinyuan Huang
YSYanping Sheng
Yanping Sheng
Natural fibers have attracted increasing attention as eco-friendly and sustainable additives for improving the durability and mechanical performance of asphalt mixes. This paper presents a critical state-of-the-art review of the use of six kinds of natural fibers in asphalt mixes. This paper reviews the impact of six natural fibers such as lignin fiber, bamboo fiber, bagasse fiber, corn stalk fiber, basalt fiber, and wool fiber on the properties of bitumen binders and mixes. It examines the influence of these fibers on the physical properties, rheological properties, and fatigue performance of bitumen binders. In addition, the influence of fibers on the moisture stability, anti-cracking, and high- and low-temperature performance of asphalt concrete was analyzed. The review demonstrated that the recommended lengths of natural fibers in asphalt mixes are as follows: lignin fiber 0.8–1.2 mm, bamboo fiber 4–20 mm, sugarcane bagasse fiber 5–12 mm, corn stalk fiber 3 mm, and basalt fiber 6–30 mm. Adding lignin fiber and corn stalk fiber enhanced the high-temperature characteristic of bitumen. The high- and low-temperature properties of the binder were improved by adding bamboo fiber. The addition of basalt fiber and bamboo fiber can increase rutting resistance and fatigue life. Additionally, incorporating the bamboo fiber, bagasse fiber, basalt fiber and wool fiber improved the low-temperature cracking and fatigue resistance of the bitumen mixture. The high-temperature properties of the bitumen mixes were enhanced by using basalt fibers, lignin fibers, bamboo fibers and bagasse fibers. The moisture resistance of bitumen mixes were reinforced by the incorporation of basalt fibers, lignin fibers and bamboo fibers. In general, incorporating natural fibers provided a technical method for improving the performance of asphalt concrete in road applications.

18 November 2023 in Coatings
Verified
Journal Article
Open access
PDF file
QGQingliang Guo
Qingliang Guo
HXHao Xu
Hao Xu
JWJunjie Wang
Junjie Wang
JHJiezhou Hang
Jiezhou Hang
KWKun Wang
Kun Wang
HLHongzhen Li
Hongzhen Li
This study investigates the microscopic mechanism of the force on particles of different particle sizes in the asphalt mixture during rutting formation. The gradation was optimized by analyzing the particle force results. The enhanced discrete element method (EDEM) was used to simulate the rutting test, study the correlation state between different particle sizes in the rutting process, and analyze the rutting of asphalt pavement from the aggregate level. From a microscopic perspective, the specific forces acting on particles at different times were determined to investigate the particle size range of stressed particles in two types of asphalt mixtures. Furthermore, the role of particles with different sizes in the rutting process was analyzed. The force limit values of particles with different particle sizes are fitted, and the force of particles in two types of asphalt mixtures is compared and analyzed. After that, the gradation of the asphalt mixture is optimized, and the feasibility of the gradation optimization method is verified by laboratory experiments. The results show that the change rule of the rutting simulation test is gradually transformed from compacted rutting to unstable rutting. The force of the asphalt concrete-13 (AC-13) asphalt mixture is borne by the particles with a radius greater than 1.8 mm. The force of the stone matrix asphalt-13 (SMA-13) asphalt mixture is borne by the particles with a radius greater than 3.6 mm, and the small particle size particles play a filling role. When the particle radius is less than 5.1 mm, the force value of AC-13 asphalt mixture particles is greater than that of SMA-13. When the particle radius exceeds 5.1 mm, the force value of SMA-13 asphalt mixture particles is greater than that of AC-13. The force of particles with a radius of 5.7 mm and 7.3 mm in the SMA-13 asphalt mixture is 30% higher than that in AC-13, and the force limit of particles is proportional to the particle size. The dynamic stability, flexural tensile strength, water immersion residual stability, and freeze-thaw splitting strength ratios of the optimized asphalt mixture are improved compared with those before optimization. The AC-13 asphalt mixture is increased by 8.5%, 9.2%, 1.6%, and 1.9%, respectively, and the SMA-13 asphalt mixture is increased by 10.6%, 7.3%, 0.7%, and 2.1%, respectively. It shows that the grading optimization method is feasible.

8 November 2023 in Coatings
Verified
Journal Article
Open access
PDF file
KWKun Wang
Kun Wang
XLXiongao Li
Xiongao Li
PHPeng Hu
Peng Hu
YZYuzhu Zhu
Yuzhu Zhu
HXHao Xu
Hao Xu
LQLu Qu
Lu Qu
The type and content of modified stalk fibers significantly influence the fatigue properties of asphalt binder. In this study, different concentrations of NaOH solution were used to modify stalk fibers, and scanning electron microscopy (SEM) was used to observe the effect of the modified concentration on the fiber morphology. A dynamic shear rheology (DSR) test and a linear amplitude sweep (LAS) test were conducted to analyze the effects of the fiber type and content on various factors such as the complex shear modulus G*, phase angle δ, and fatigue parameters (A35 and B). Consequently, the fatigue life Nf of the fiber asphalt binder was calculated using a viscoelastic continuum damage model. The results show that stalk fibers modified using a 5% alkali solution exhibited the best oil absorption and heat resistance, the asphalt binder with a 1.5%–2% fiber content exhibited the best resistance to fatigue, and the fatigue performance of the asphalt binder with different types of fibers was superior when fiber doping was at 1.5%. Additionally, the fatigue parameter A35 of the modified cotton and corn stover fibers increased by 40.5% and 57.6%, respectively, and the fatigue parameter B decreased by 5.8% and 4.8%, respectively, compared with that of the unmodified stover fibers. Finally, the modified corn stalk fiber asphalt binder with a 1.5% fiber content demonstrated the best fatigue resistance.

31 May 2025 in Materials
Verified
Journal Article
Open access
PDF file
PHPeng Hu
Peng Hu
XSXiao Shao
Xiao Shao
KWKun Wang
Kun Wang
HJHaichuan Jia
Haichuan Jia
LCLong Chen
Long Chen
As an aspect of green road construction, the use of waste plastic agricultural film in asphalt pavement not only mitigates environmental pollution but also enhances the mechanical properties of asphalt. However, it has been plagued by problems such as poor low-temperature crack resistance and poor compatibility. To address this problem, this study used waste low-density polyethylene (LDPE), sourced from waste film, and the plasticizer diisononyl phthalate (DINP) to enhance the properties of asphalt. Based on orthogonal tests, rheological property tests, conventional property tests, storage stability tests, fluorescence microscopy (FM), and Fourier transform infrared (FTIR) tests, waste LDPE/plasticizer DINP-modified asphalt samples were evaluated. Orthogonal tests indicated that a modified asphalt optimum preparation process of 30 min and 4500 rpm at 180 °C was beneficial. Conventional and rheological property tests revealed that 4% waste LDPE modified with 2.5% plasticizer DINP represents the optimal combination to effectively enhance the low-temperature rheological properties of asphalt while exerting minimal impact on its high-temperature characteristics. Storage stability and FM analysis indicated that waste LDPE is evenly dispersed in the modified asphalt binder when 3% plasticizer DINP is added. FTIR analysis revealed no change in the absorption peaks after waste LDPE and plasticizer DINP were added to asphalt, indicating that no chemical reactions occurred. Overall, waste LDPE/plasticizer DINP-modified asphalt exhibits excellent rheological properties and storage stability, which are conducive to green road construction and resource utilization.

7 April 2024 in Coatings
Verified
Journal Article
Open access
PDF file
KWKun Wang
Kun Wang
LQLu Qu
Lu Qu
LTLiang Tang
Liang Tang
PHPeng Hu
Peng Hu
QWQiong Wu
Qiong Wu
HXHao Xu
Hao Xu
As an agricultural waste, a large amount of corn stalk will cause environmental pollution. In order to realize the resource utilization of waste and meet the strict requirements of modern traffic on pavement strength and durability, it was modified and applied to an AC-13 asphalt mixture to study its influence on the road performance of asphalt mixture and its mechanism. The road performances of modified corn stalk fiber, lignin fiber, and ordinary asphalt mixtures were evaluated via the wheel tracking test, low-temperature bending test, water immersion Marshall test, freeze–thaw splitting test, and fatigue test. Based on the results of three-point bending fatigue test, the viscoelastic parameters and indexes of the fiber asphalt mixture were obtained by fitting the loading specimen and deflection data with the Burgers constitutive model, and the creep strain response was analyzed by applying dynamic load, so as to explore the relationship between the viscoelastic characteristics and creep behavior of modified corn stalk fiber and AC-13 mixture. The long-term high-temperature performance test of the asphalt mixture with the best fiber content was carried out by using the long-term pavement intelligent monitoring equipment independently developed by the group of investigators. According to the findings, the ideal fiber contents for modified corn and lignin in asphalt mixture are 0.2% and 0.3%, respectively. Among them, the modified corn stalk fiber with a 0.2% content has the best effect on road performance, viscoelastic performance, and the asphalt mixture’s creep behavior under dynamic load. Compared with the 0.3% lignin fiber asphalt mixture, its dynamic stability, bending stiffness modulus, immersion residual stability, freeze–thaw splitting strength ratio, and loading times at failure increased by 19.9%, 18.28%, 4.19%, 8.6%, and 9.15%, respectively. Compared with ordinary asphalt mixture, it increased by 47.0%, 28.72%, 7.65%, 15%, and 75.81%, respectively. Moreover, when modified corn stalk fiber is added at 0.2%, the viscoelastic delay time of asphalt mixture is the longest, the strain peak value and rut depth are at a minimum, and the viscoelastic properties, creep properties, and long-term high-temperature properties are the best.

24 January 2023 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
KWKun Wang
Kun Wang
QWQiong Wu
Qiong Wu
PHPeng Hu
Peng Hu
HXHao Xu
Hao Xu
LQLu Qu
Lu Qu
TSTao Shi
Tao Shi
In this study, the correlation between the microstructure of straw fibers and the macroscopic properties of asphalt binders is investigated. Penetration, softening point, bending beam rheometer, and toughness tests are performed to investigate the relationship between the pavement properties of fiber asphalt binders and each of the fiber types and contents. Subsequently, a four-component test, SEM, Fourier transform infrared microscopy, and fluorescence microscope tests are performed to analyze the microstructure of the straw fiber and its effect on asphalt properties. The results show that the high-temperature performance and shear resistance of the asphalt binder were enhanced with an increase in the modified straw fiber content. The low-temperature performance and toughness of the asphalt binder were reduced because of excessive fiber, and the recommended fiber content is 1.5%–2.0%. The adsorption capacity of the modified straw fiber for the light components of asphalt increased by 5.4% on average, and the low-temperature creep capacity of asphalt decreased by 9.6%. The surface roughness of the straw fiber increased via modification, and the shear resistance, high-temperature deformation resistance, and stress relaxation ability of the asphalt increased by 23.1%, 6.5%, and 5.7%, respectively. The comprehensive properties of the asphalt binder with modified straw fiber are similar to those of lignin fiber.