Kun Wang

Kun Wang


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 July 2024 in Water Science & Technology
Verified
Journal Article
Open access
PDF file
GZGuisheng Zeng
Guisheng Zeng
BGBaichuan Gong
Baichuan Gong
YLYingpeng Li
Yingpeng Li
KWKun Wang
Kun Wang
QGQian Guan
Qian Guan
Superhydrophobic coatings with excellent self-cleaning performance have attracted significant concerns from researchers. Although various superhydrophobic coatings with prominent superhydrophobic properties have been fabricated, most developed coatings are still inadequate in pipeline scale inhibition applications. In this work, nano-silica (nano-SiO2) was modified by silane coupling of vinyltriethoxysilane (VETS) and 1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane (PFTS) to prepare a superhydrophobic coating. Organosilicon of PFTS and VETS was grafted onto the surface of SiO2 for preparing the superhydrophobic coating with low surface energy, and the superhydrophobic coating was cured via poly(vinylidene fluoride) (PVDF). The results showed that the contact angle of the prepared silica-based superhydrophobic coating, denoted as VETS-PFTS@SiO2/PVDF, is 159.2°, exhibiting outstanding superhydrophobicity performance. Furthermore, the superhydrophobicity coating also showed satisfactory durability performance in 200 g load wear test after 50 cycles. Importantly, the superhydrophobic coating displayed promising mechanical durability, chemical stability performance, as well as maintained excellent superhydrophobic properties after being placed in water for 3 weeks, indicating the potential for long-term utilization. In the simulated scale inhibition test, it was found that the synthesized coating can also significantly decrease the deposition rate of CaCO3 and successfully enhance its scale inhibition performance.

8 November 2023 in Coatings
Verified
Journal Article
Open access
PDF file
KWKun Wang
Kun Wang
XLXiongao Li
Xiongao Li
PHPeng Hu
Peng Hu
YZYuzhu Zhu
Yuzhu Zhu
HXHao Xu
Hao Xu
LQLu Qu
Lu Qu
The type and content of modified stalk fibers significantly influence the fatigue properties of asphalt binder. In this study, different concentrations of NaOH solution were used to modify stalk fibers, and scanning electron microscopy (SEM) was used to observe the effect of the modified concentration on the fiber morphology. A dynamic shear rheology (DSR) test and a linear amplitude sweep (LAS) test were conducted to analyze the effects of the fiber type and content on various factors such as the complex shear modulus G*, phase angle δ, and fatigue parameters (A35 and B). Consequently, the fatigue life Nf of the fiber asphalt binder was calculated using a viscoelastic continuum damage model. The results show that stalk fibers modified using a 5% alkali solution exhibited the best oil absorption and heat resistance, the asphalt binder with a 1.5%–2% fiber content exhibited the best resistance to fatigue, and the fatigue performance of the asphalt binder with different types of fibers was superior when fiber doping was at 1.5%. Additionally, the fatigue parameter A35 of the modified cotton and corn stover fibers increased by 40.5% and 57.6%, respectively, and the fatigue parameter B decreased by 5.8% and 4.8%, respectively, compared with that of the unmodified stover fibers. Finally, the modified corn stalk fiber asphalt binder with a 1.5% fiber content demonstrated the best fatigue resistance.

18 November 2023 in Coatings
Verified
Journal Article
Open access
PDF file
QGQingliang Guo
Qingliang Guo
HXHao Xu
Hao Xu
JWJunjie Wang
Junjie Wang
JHJiezhou Hang
Jiezhou Hang
KWKun Wang
Kun Wang
HLHongzhen Li
Hongzhen Li
This study investigates the microscopic mechanism of the force on particles of different particle sizes in the asphalt mixture during rutting formation. The gradation was optimized by analyzing the particle force results. The enhanced discrete element method (EDEM) was used to simulate the rutting test, study the correlation state between different particle sizes in the rutting process, and analyze the rutting of asphalt pavement from the aggregate level. From a microscopic perspective, the specific forces acting on particles at different times were determined to investigate the particle size range of stressed particles in two types of asphalt mixtures. Furthermore, the role of particles with different sizes in the rutting process was analyzed. The force limit values of particles with different particle sizes are fitted, and the force of particles in two types of asphalt mixtures is compared and analyzed. After that, the gradation of the asphalt mixture is optimized, and the feasibility of the gradation optimization method is verified by laboratory experiments. The results show that the change rule of the rutting simulation test is gradually transformed from compacted rutting to unstable rutting. The force of the asphalt concrete-13 (AC-13) asphalt mixture is borne by the particles with a radius greater than 1.8 mm. The force of the stone matrix asphalt-13 (SMA-13) asphalt mixture is borne by the particles with a radius greater than 3.6 mm, and the small particle size particles play a filling role. When the particle radius is less than 5.1 mm, the force value of AC-13 asphalt mixture particles is greater than that of SMA-13. When the particle radius exceeds 5.1 mm, the force value of SMA-13 asphalt mixture particles is greater than that of AC-13. The force of particles with a radius of 5.7 mm and 7.3 mm in the SMA-13 asphalt mixture is 30% higher than that in AC-13, and the force limit of particles is proportional to the particle size. The dynamic stability, flexural tensile strength, water immersion residual stability, and freeze-thaw splitting strength ratios of the optimized asphalt mixture are improved compared with those before optimization. The AC-13 asphalt mixture is increased by 8.5%, 9.2%, 1.6%, and 1.9%, respectively, and the SMA-13 asphalt mixture is increased by 10.6%, 7.3%, 0.7%, and 2.1%, respectively. It shows that the grading optimization method is feasible.

15 February 2026 in Materials
Verified
Journal Article
Open access
PDF file
HJHaichuan Jia
Haichuan Jia
XGXin Gao
Xin Gao
雨张雨昕 张
雨昕 张
XMXianghe Meng
Xianghe Meng
XHXinyuan Huang
Xinyuan Huang
YSYanping Sheng
Yanping Sheng
Natural fibers have attracted increasing attention as eco-friendly and sustainable additives for improving the durability and mechanical performance of asphalt mixes. This paper presents a critical state-of-the-art review of the use of six kinds of natural fibers in asphalt mixes. This paper reviews the impact of six natural fibers such as lignin fiber, bamboo fiber, bagasse fiber, corn stalk fiber, basalt fiber, and wool fiber on the properties of bitumen binders and mixes. It examines the influence of these fibers on the physical properties, rheological properties, and fatigue performance of bitumen binders. In addition, the influence of fibers on the moisture stability, anti-cracking, and high- and low-temperature performance of asphalt concrete was analyzed. The review demonstrated that the recommended lengths of natural fibers in asphalt mixes are as follows: lignin fiber 0.8–1.2 mm, bamboo fiber 4–20 mm, sugarcane bagasse fiber 5–12 mm, corn stalk fiber 3 mm, and basalt fiber 6–30 mm. Adding lignin fiber and corn stalk fiber enhanced the high-temperature characteristic of bitumen. The high- and low-temperature properties of the binder were improved by adding bamboo fiber. The addition of basalt fiber and bamboo fiber can increase rutting resistance and fatigue life. Additionally, incorporating the bamboo fiber, bagasse fiber, basalt fiber and wool fiber improved the low-temperature cracking and fatigue resistance of the bitumen mixture. The high-temperature properties of the bitumen mixes were enhanced by using basalt fibers, lignin fibers, bamboo fibers and bagasse fibers. The moisture resistance of bitumen mixes were reinforced by the incorporation of basalt fibers, lignin fibers and bamboo fibers. In general, incorporating natural fibers provided a technical method for improving the performance of asphalt concrete in road applications.

23 February 2025 in Materials and Structures
Verified
Journal Article
Closed access
PDF file
PHPeng Hu
Peng Hu
HJHongyu Ji
Hongyu Ji
KWKun Wang
Kun Wang
FZFeng Zhao
Feng Zhao
BLBaicheng Liu
Baicheng Liu
YZYulong Zhao
Yulong Zhao

31 May 2025 in Materials
Verified
Journal Article
Open access
PDF file
PHPeng Hu
Peng Hu
XSXiao Shao
Xiao Shao
KWKun Wang
Kun Wang
HJHaichuan Jia
Haichuan Jia
LCLong Chen
Long Chen
As an aspect of green road construction, the use of waste plastic agricultural film in asphalt pavement not only mitigates environmental pollution but also enhances the mechanical properties of asphalt. However, it has been plagued by problems such as poor low-temperature crack resistance and poor compatibility. To address this problem, this study used waste low-density polyethylene (LDPE), sourced from waste film, and the plasticizer diisononyl phthalate (DINP) to enhance the properties of asphalt. Based on orthogonal tests, rheological property tests, conventional property tests, storage stability tests, fluorescence microscopy (FM), and Fourier transform infrared (FTIR) tests, waste LDPE/plasticizer DINP-modified asphalt samples were evaluated. Orthogonal tests indicated that a modified asphalt optimum preparation process of 30 min and 4500 rpm at 180 °C was beneficial. Conventional and rheological property tests revealed that 4% waste LDPE modified with 2.5% plasticizer DINP represents the optimal combination to effectively enhance the low-temperature rheological properties of asphalt while exerting minimal impact on its high-temperature characteristics. Storage stability and FM analysis indicated that waste LDPE is evenly dispersed in the modified asphalt binder when 3% plasticizer DINP is added. FTIR analysis revealed no change in the absorption peaks after waste LDPE and plasticizer DINP were added to asphalt, indicating that no chemical reactions occurred. Overall, waste LDPE/plasticizer DINP-modified asphalt exhibits excellent rheological properties and storage stability, which are conducive to green road construction and resource utilization.