Sun-Joon Byun

Mr. Sun-Joon Byun

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 February 2018 in Energies
Verified
Journal Article
Open access
PDF file
SBSun-Joon Byun
Sun-Joon Byun
ZWZhen Huan Wang
Zhen Huan Wang
JSJun Son
Jun Son
DKDong-Kurl Kwak
Dong-Kurl Kwak
YKYoung-Chul Kwon
Young-Chul Kwon
We propose a wave-like design on the surface of cathode channels (wave form cathode channels) to improve oxidant delivery to gas diffusion layers (GDLs). We performed experiments using proton-exchange membrane fuel cells (PEMFCs) combined with wave form surface design on cathodes. We varied the factors of the distance between wave-bumps (the adhesive distance, AD), and the size of the wave-bumps (the expansion ratio, ER). The ADs are three, four, and five times the size of the half-circle bump’s radius, and the ERs are two-thirds, one-half, and one-third of the channel’s height. We evaluated the performances of the fuel cells, and compared the current-voltage (I-V) relations. For comparison, we prepared PEMFCs with conventional flat-surfaced oxygen channels. Our aim in this work is to identify fuel cell operation by modifying the surface design of channels, and ultimately to find the optimal design of cathode channels that will maximize fuel cell performance.

1 December 2018 in Nuclear Engineering and Design
Verified
Journal Article
Closed access
SBSun-Joon Byun
Sun-Joon Byun
CSChang-Hwan Shin
Chang-Hwan Shin
JYJung Yoon
Jung Yoon
HKHyungmo Kim
Hyungmo Kim
JLJewhan Lee
Jewhan Lee
JJJi-Young Jeong
Ji-Young Jeong

7 May 2013 in Energies
Verified
Journal Article
Open access
PDF file
SBSun-Joon Byun
Sun-Joon Byun
DJDong-Hwa Jeong
Dong-Hwa Jeong
YCYoung Don Choi
Young Don Choi
JSJong-Keun Shin
Jong-Keun Shin
In the present study, a fuel cell driven ground source heat pump (GSHP) system is applied in a community building and heat pump system performance is analyzed by computational methods. Conduction heat transfer between the brine pipe and ground is analyzed by TEACH code in order to predict the performance of the heat pump system. The predicted coefficient of performance (COP) of the heat pump system and the energy cost were compared with the variation of the location of the objective building, the water saturation rate of the soil, and the driven powers of the heat pump system. Compared to the late-night electricity driven system, a significant reduction of energy cost can be accomplished by employing the fuel cell driven heat pump system. This is due to the low cost of electricity production of the fuel cell system and to the application of the recovered waste heat generated during the electricity production process to the heating of the community building.

24 May 2012 in Energies
Verified
Journal Article
Open access
PDF file
SBSun-Joon Byun
Sun-Joon Byun
YCYoung Don Choi
Young Don Choi
JSJong-Keun Shin
Jong-Keun Shin
MPMyung-Ho Park
Myung-Ho Park
DKDong-Kurl Kwak
Dong-Kurl Kwak
In the present study, we have developed an optimal heat supply algorithm which minimizes the heat loss through the distribution pipe line in a group energy apartment. Heating load variation of a group energy apartment building according to the outdoor air temperature was predicted by a correlation obtained from calorimetry measurements of all households in the apartment building. Supply water temperature and mass flow rate were simultaneously controlled to minimize the heat loss rate through the distribution pipe line. A group heating apartment building located in Hwaseong city, Korea, which has 1473 households, was selected as the object building to test the present heat supply algorithm. Compared to the original heat supply system, the present system adopting the proposed control algorithm reduced the heat loss rate by 10.4%.

14 December 2017 in Preprints.org
Verified
Preprint
Open access
SBSun-Joon Byun
Sun-Joon Byun
ZWZhen Huan Wang
Zhen Huan Wang
JSJun Son
Jun Son
YKYoung-Chul Kwon
Young-Chul Kwon
DKDong-Kurl Kwak
Dong-Kurl Kwak
We propose a wave-like design on the surface of cathode channels (wave form cathode channels) to improve oxidant delivery to gas diffusion layers (GDLs) [1-2]. We performed experiments using PEMFCs combined with wave form surface design on cathodes. We varied the factors of the distance between wave-bumps (the Adhesive distance, AD), and the size of the wave-bumps (the Expansion ratio, ER). The ADs are 3, 4, and 5 times the size of the half-circle bump’s radius, and the ERs are 1/1.5, 1/2, and 1/3 times the channel’s height. We evaluated the performances of the fuel cells, and compared the current-voltage (I-V) relations. For comparison, we prepared PEMFCs with conventional flat-surfaced oxygen channels. Our aim in this work is to identify fuel cell operation by modifying the surface design of channels, and ultimately to find the optimal design of cathode channels that will maximize fuel cell performance.

5 January 2017 in Preprints.org
Verified
Preprint
Open access
PDF file
SBSun-Joon Byun
Sun-Joon Byun
SLSang-Jae Lee
Sang-Jae Lee
JCJae-Min Cha
Jae-Min Cha
ZWZhen-Huan Wang
Zhen-Huan Wang
YKYoung-Chul Kwon
Young-Chul Kwon
This study presents the comparison of heat transfer capacity and pressure drop characteristics between a basic fin-tube heat exchanger and a modified heat exchanger with the structural change of branch tubes and coiled turbulators. All experiments were carried out using an air-enthalpy type calorimeter based on the method described in ASHRAE standards, under heat exchanger experimental conditions. 14 different kinds of heat exchangers were used for the experiment. Cooling and heating capacities of the turbulator heat exchanger were excellent, compared to the basic one. As the insertion ratio of the coiled turbulator and the number of row increased, the heat transfer performance increased. However, the capacity per unit area was more effective in 4 rows than 6 rows, and the cooling performance of the 6 row turbulator heat exchanger (100% turbulator insert ratio) was down to about 6% than that of 4 row one. As the water flow rate and the turbulator insertion ratio increased, the pressure drop of the water side increased. This trend was more pronounced in 6 rows. In the cooling condition, the pressure drop on the air side was slightly increased due to the generation of condensed water, but was insignificant under the heating condition. The power consumption of the pump was more affected by the water flow rate than the coiled turbulator. The equivalent hydraulic diameter of a tube by the turbulator was reduced and then the heat transfer performance was improved. Thus, the tube diameter was smaller, the heat flux was better.