The production of high added-value chemicals from renewable resources is a necessity in our attempts to switch to a more sustainable society. 3-Hydroxypropionic acid (3HP) is a promising molecule that can be used for the production of an important array of high added-value chemicals, such as 1,3-propanediol, acrylic acid, acrylamide, and bioplastics. Biological production of 3HP has been studied extensively, mainly from glycerol and glucose, which are both renewable resources. To enable conversion of these carbon sources to 3HP, extensive work has been performed to identify appropriate biochemical pathways and the enzymes that are involved in them. Novel enzymes have also been identified and expressed in host microorganisms to improve the production yields of 3HP. Various process configurations have also been proposed, resulting in improved conversion yields. The intense research efforts have resulted in the production of as much as 83.8 g/L 3HP from renewable carbon resources, and a system whereby 3-hydroxypropionitrile was converted to 3HP through whole-cell catalysis which resulted in 184.7 g/L 3HP. Although there are still challenges and difficulties that need to be addressed, the research results from the past four years have been an important step towards biological production of 3HP at the industrial level.

Polyunsaturated fatty acids (PUFAs) are essential for human function, however they have to be provided through the diet. As their production from fish oil is environmentally unsustainable, there is demand for new sources of PUFAs. The aim of the present work was to establish the microalgal platform to produce nutraceutical-value PUFAs from forest biomass. To this end, the growth of Phaeodactylum tricornutum on birch and spruce hydrolysates was compared to autotrophic cultivation and glucose synthetic media. Total lipid generated by P. tricornutum grown mixotrophically on glucose, birch, and spruce hydrolysates was 1.21, 1.26, and 1.29 g/L, respectively. The highest eicosapentaenoic acid (EPA) production (256 mg/L) and productivity (19.69 mg/L/d) were observed on spruce hydrolysates. These values were considerably higher than those obtained from the cultivation without glucose (79.80 mg/L and 6.14 mg/L/d, respectively) and also from the photoautotrophic cultivation (26.86 mg/L and 2.44 mg/L/d, respectively). To the best of our knowledge, this is the first report describing the use of forest biomass as raw material for EPA and docosapentaenoic acid (DHA) production.

The use of residual biomass for bioconversions makes it possible to decrease the output of fossil-based chemicals and pursue a greener economy. While the use of lignocellulosic material as sustainable feedstock has been tried at pilot scale, industrial production is not yet economically feasible, requiring further technology and feedstock optimization. The aim of this study was to examine the feasibility of replacing woodchips with residual sawdust in biorefinery applications. Woodchips can be used in value-added processes such as paper pulp production, whereas sawdust is currently used mainly for combustion. The main advantages of sawdust are its large supply and a particle size sufficiently small for the pretreatment process. Whereas, the main challenge is the higher complexity of the lignocellulosic biomass, as it can contain small amounts of bark and cambium. Here, we studied the fractionation of birch sawdust by organosolv pretreatment at two different temperatures and for two different durations. We evaluated the efficiency of fractionation into the three main fractions: lignin, cellulose, and hemicellulose. The cellulose content in pretreated biomass was as high as 69.2%, which was nearly double the amount in untreated biomass. The obtained lignin was of high purity, with a maximum 4.5% of contaminating sugars. Subsequent evaluation of the susceptibility of pretreated solids to enzymatic saccharification revealed glucose yields ranging from 75% to 90% after 48 h but reaching 100.0% under the best conditions. In summary, birch sawdust can be successfully utilized as a feedstock for organosolv fractionation and replace woodchips to simplify and lower the costs of biorefinery processes.

Textile production has doubled in the last 20 years, but only 1% is recycled into new fibers. It is the third largest contributor to water pollution and land use, accounting for 10% of global carbon emissions and 20% of clean water pollution. A key challenge in textile recycling is blended yarns, such as polycotton blends, which consist of polyester and cotton. Chemical recycling offers a solution, in particular, alkali treatment, which hydrolyzes polyester (PET) into its components while preserving cotton fibers. However, conventional methods require high temperatures, long durations, or catalysts. Our study presents, for the first time, the heated high-ethanol alkaline aqueous (HHeAA) process that efficiently hydrolyzes PET from polycotton at lower temperatures and without a catalyst. A near-complete PET hydrolysis was achieved in 20 min at 90 °C, while similar results were obtained at 70 °C and 80 °C with longer reaction times. The process was successfully scaled at 90 °C for 20 min, and complete PET hydrolysis was achieved, with a significantly reduced liquid-to-solid ratio, from 40 to 7 (L per kg), signifying its potential to be implemented in an industrial context. Additionally, the cotton maintained most of its properties after the treatment. This method provides a more sustainable and efficient approach to polycotton recycling.