Qianhong Chen

Prof. Dr. Qianhong Chen


Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 April 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
HLHaoran Li
Haoran Li
ZZZhiliang Zhang
Zhiliang Zhang
SWShengdong Wang
Shengdong Wang
JTJiacheng Tang
Jiacheng Tang
XRXiaoyong Ren
Xiaoyong Ren
QCQianhong Chen
Qianhong Chen
The reverse LLC voltage gain is lower than unity. The DC-link voltage is then lower than the peak grid voltage so that the buck type DC-AC converters cannot be grid-tied directly, which causes the LLC reverse operation difficult in bidirectional application. This paper proposes a SiC bidirectional LLC charger architecture to achieve high efficiency and high power density. The first stage is an interleaved bridgeless totem pole PFC to achieve unity power factor. The second stage is a 300-kHz LLC taking advantage of wide ZVS range and magnetic integration. Thanks to extra control freedom of high DC-link voltage, the DC-DC voltage gain regulation is shared by the DC/AC stage taking advantage of high voltage SiC MOSFETs. A reverse LLC voltage gain compensation control by regulating DC-link voltage is proposed to enable the LLC bidirectional operation. A digital adaptive synchronous rectification driving scheme is proposed based on the LLC primary driver signals, which immunes to the circuit oscillation caused by high dv/dt and parasitic elements. A 6.6 kW SiC bidirectional LLC charger was built. The power density is 3.42 kW/L with 3 kW /kg and increases 55.6% over the reference design. The charging efficiency is above 96% through the battery voltage from 240 V to 420 V, and 2% higher than the state-of-the-art products. The peak discharging efficiency under 6.6 kW is 96%, and 1% higher than the state-of-the-art efficiency.

22 September 2017 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
JHJia Hou
Jia Hou
QCQianhong Chen
Qianhong Chen
ZZZhiliang Zhang
Zhiliang Zhang
SWSiu-Chung Wong
Siu-Chung Wong
CTChi K. Tse
Chi K. Tse
Constant output current is desirable for some wireless power transmission applications such as charging batteries and driving light-emitting diodes. Converters having an inherently small output current fluctuation versus variations of load and coupling are attractive solutions since such converters can be controlled to achieve constant current with minimum control efforts. In this paper, the impedance conditions and the output current characteristics for different compensation types are presented. It is shown that the types of compensation producing load- and coupling-independent output current at the designed operating point as well as having a unimodal dependence of the output current on coupling would achieve better output current performance against variations of load and coupling. The sensitivities of the output current to parameter variation of typical compensation types are quantitatively analyzed and compared. Analytical results indicate that the primary parallel-series and secondary series compensation, which produces output current that exhibits a unimodal relationship with coupling and is nearly immune to coupling variation at the designed operating point, has the smallest output current fluctuation versus variation of the coupling coefficient. Finally, a comparison of experimental results of different types of compensation is presented for verification.

14 August 2017 in IEEE Transactions on Power Electronics
Verified
Journal Article
Open access
HWHao Wu
Hao Wu
SWSiu-Chung Wong
Siu-Chung Wong
CTChi K. Tse
Chi K. Tse
SHS. Y. Ron Hui
S. Y. Ron Hui
QCQianhong Chen
Qianhong Chen
High-power light-emitting diodes (LEDs) having properties of high luminous efficacy and long life span are becoming a major light source for general illumination. To fully utilize the advantages of LED in lighting applications, the offline power supply that drives the LED should possess the following features: high efficiency, long life span, high input power factor, and (COC). In this paper, high efficiency is achieved by using a minimal power processing (MPP) configuration. Near perfect power factor correction (PFC) is achieved by a simple dual-output disc-ontinuous-conduction-mode (DCM) pulse-width-modulated (PWM) front-end converter. One output of the front-end converter is connected to the LED load using a control switch. The other output is connected directly to a dc storage capacitor cascaded with a downstream DCM PWM converter driving the same LED load to achieve COC driving. The power flow is controlled to achieve the required MPP that can also reduce the storage capacitance by balancing only the ac input ripple power and the dc output power without power recycling. Thus, the design requires no electrolytic capacitor, hence extending the system life span. The achievement of input PFC, MPP, and COC requires design tradeoff among design freedom, ease of control and component count. LED drivers having all these properties are developed, designed, and tested.

21 April 2020 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
GKGuangjie Ke
Guangjie Ke
QCQianhong Chen
Qianhong Chen
LXLigang Xu
Ligang Xu
XRXiaoyong Ren
Xiaoyong Ren
ZZZhiliang Zhang
Zhiliang Zhang
This article investigates a double-sided series and LCC (S-LCC) hybrid resonant converter for wireless power conversion. For achieving high tolerance to the displacement in the lateral, longitudinal or vertical direction, the coupling requirements are discussed for the magnetic coupler, and a cross-shaped hybrid DD pad is proposed for serving as the magnetic coupler in the presented converter. To concurrently achieve the minimum output current fluctuation and the maximum conversion efficiency, design considerations and design procedures are proposed for tuning the compensation network. Finally, a 250 W prototype is built and tested in the lab. The experimental results show that the S-LCC hybrid converter achieves a maximum conversion efficiency of 94.6% and an output current fluctuation factor of 16.6% for the given displacements.

25 June 2018 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
ZZZhiliang Zhang
Zhiliang Zhang
BHBinghui He
Binghui He
DHDong-Dong Hu
Dong-Dong Hu
XRXiaoyong Ren
Xiaoyong Ren
QCQianhong Chen
Qianhong Chen
eGaN HEMTs are promising to increase switching frequency into multi-MHz for high power density. However, it is a serious challenge to identify the equivalent lumped capacitances of MHz multi-winding planar transformers for common-mode (CM) noise analysis to optimize the EMI filters. The couple-turn with its one-capacitor model is proposed to quantify the total CM noise current via high frequency transformers. With the modeled total CM noise current, the equivalent lumped interwinding capacitance model of the transformer can be derived conveniently and accurately. A complete CM noise path model is built for a GaN active clamp forward with self-driven synchronous rectification (SR) multi-output converter. A CM noise cancellation capacitance is applied and optimized to generate a reverse extraction current to cancel the CM noise current. Compared with other methods, the proposed modeling technique can build the equivalent lumped interwinding capacitance model of the multi-winding planar transformer in the PCB layout stage before it is fabricated physically. The proposed model is verified by a 1-MHz prototype with 100 V input, 5 V /6 A and ±12 V/ 0.83 A outputs. The CM noise spectrum is well predicted. The CM noise is reduced by around 15 dB (a reduction of 12.6%) below 9MHz.

19 January 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
SWShengdong Wang
Shengdong Wang
HLHaoran Li
Haoran Li
ZZZhiliang Zhang
Zhiliang Zhang
MLMengrui Li
Mengrui Li
JZJingfei Zhang
Jingfei Zhang
QCQianhong Chen
Qianhong Chen
A SiC bidirectional portable charger is proposed to realize both bidirectional ac–dc and bidirectional dc–dc high-efficiency power conversion by multiplexing the same powertrain. Control strategies for different operation modes are proposed to realize the comprehensive functions of the portable charger. The proposed portable charger enables the EV to interact with the ac grid, dc microgrid, other EVs, and off-line loads efficiently and conveniently. The SiC portable charger adopts 300-kHz high-frequency isolation to improve the power density. The proposed vehicle-to-vehicle (V2V) mode adopts two-stage direct dc–dc power conversion so that it achieves higher efficiency compared with conventional V2V mode using an on-board charger (OBC). A 6.6-kW SiC bidirectional portable charger is built and the power density is 14.7 W/in 3 . The full-load efficiency of V2V mode is 96.1%, which is 4.7% improved compared with the conventional V2V mode. Bidirectional energy interaction between EV and the 380-V dc microgrid is also verified. The portable charger provides 36–400-V wide output voltage for dc loads with the efficiency above 95.7% at 6.6 kW.