This paper presents a traction control (TC) system for electric vehicles with in-wheel motors, based on explicit nonlinear model predictive control. The feedback law, available beforehand, is described in detail, together with its variation for different plant conditions. The explicit controller is implemented on a rapid control prototyping unit, which proves the real-time capability of the strategy, with computing times on the order of microseconds. These are significantly lower than the required time step for a TC application. Hence, the explicit model predictive controller can run at the same frequency as a simple TC system based on proportional integral (PI) technology. High-fidelity model simulations provide: 1) a performance comparison of the proposed explicit nonlinear model predictive controller (NMPC) with a benchmark PI-based traction controller with gain scheduling and anti-windup features, and 2) a performance comparison among two explicit and one implicit NMPCs based on different internal models, with and without consideration of transient tire behavior and load transfers. Experimental test results on an electric vehicle demonstrator are shown for one of the explicit NMPC formulations.

This study addresses the development and Hardware-in-the-Loop (HiL) testing of an explicit nonlinear model predictive controller (eNMPC) for an anti-lock braking system (ABS) for passenger cars, actuated through an electro-hydraulic braking (EHB) unit. The control structure includes a compensation strategy to guard against performance degradation due to actuation dead times, identified through experimental tests. The eNMPC is run on an automotive rapid control prototyping unit, which shows its real-time capability with comfortable margin. A validated high-fidelity vehicle simulation model is used for the assessment of the ABS on a HiL rig equipped with the braking system hardware. The eNMPC is tested in 7 emergency braking scenarios, and its performance is benchmarked against a proportional integral derivative (PID) controller. The eNMPC results show: i) the control system robustness with respect to variations of tire-road friction condition and initial vehicle speed; and ii) a consistent and significant improvement of the stopping distance and wheel slip reference tracking, with respect to the vehicle with the PID ABS.

This study discusses vehicle stability control based on explicit nonlinear model predictive control (NMPC) and investigates the influence of prediction model fidelity on controller performance. The explicit solutions are generated through an algorithm using multiparametric quadratic programming (mp-QP) approximations of the multiparametric nonlinear programming (mp-NLP) problems. Controllers with different prediction models are assessed through objective indicators in sine-with-dwell tests. The analysis considers the following prediction model features: 1) nonlinear lateral tire forces as functions of slip angles, which are essential for the operation of the stability controller at the limit of handling. Moreover, a simple nonlinear tire force model with saturation is shown to be an effective alternative to a more complex model based on a simplified version of the Magic Formula; 2) longitudinal and lateral load transfers, playing a crucial role in the accurate prediction of the lateral tire forces and their yaw moment contributions; 3) coupling between longitudinal and lateral tire forces, which has a significant influence on the front-to-rear distribution of the braking forces generated by the controller; and 4) nonlinear peak and stiffness factors of the tire model, with visible yet negligible effects on the results.

Anti-jerk controllers actively suppress the torsional oscillations of automotive drivetrains, caused by abrupt variations of the traction torque. The main benefits are: i) enhanced passengers' comfort; and ii) increased component life. Extensive literature deals with the design of anti-jerk controllers for electric powertrains with on-board motors, i.e., in which the electric motor is part of the sprung mass of the vehicle, and transmits torque to the wheels through a transmission, half-shafts and constant velocity joints. Nevertheless, a complete and structured comparison of the performance of the different control options is still missing. This study addresses the gap through the assessment of six anti-jerk controllers - five exemplary formulations from the literature, and one novel formulation based on explicit nonlinear model predictive control (eNMPC). All proposed control structures have the potential to be implemented on production vehicles. A set of objective performance indicators is defined to assess the controllers, which are tuned through an optimization-based routine. Results show that the wheel speed input is critical to enhance controller performance, but may lead to reduced robustness.