In this review, we describe the use of supercritical CO₂ (scCO₂) in several cellulose applications. The focus is on different technologies that either exist or are expected to emerge in the near future. The applications are wide from the extraction of hazardous wastes to the cleaning and reuse of paper or production of glucose. To put this topic in context, cellulose chemistry and its interactions with scCO₂ are described. The aim of this study was to discuss the new emerging technologies and trends concerning cellulosic materials processed in scCO₂ such as cellulose drying to obtain aerogels, foams and other microporous materials, impregnation of cellulose, extraction of highly valuable compounds from plants and metallic residues from treated wood. Especially, in the bio-fuel production field, we address the pre-treatment of cellulose in scCO₂ to improve fermentation to ethanol by cellulase enzymes. Other reactions of cellulosic materials such as organic inorganic composites fabrication and de-polymerisation have been considered. Cellulose treatment by scCO₂ has been discussed as well. Finally, other applications like deacidification of paper and cellulosic membranes fabrication in scCO₂ have been reviewed. Examples of the discussed technologies are included as well.

Natural cellulose fibres have been employed for packaging applications for a long time. Their use, however, has been hampered by their high hydrophilicity and their moisture sensitivity. It has, thus, been proposed to circumvent this problem through the hydrophobic modification of their surface thanks to the use of molecular grafting approaches.In this work, we describe the use of a novel solvent-free chemical pathway for molecular grafting that we have coined chromatogenic chemistry. It involves a reaction between a solid substrate and a reagent which is in a vapour-liquid equilibrium and diffuses within the solid substrate through a mechanism of adsorption/desorption akin to gas chromatography.Chromatogenic chemistry phenomenon has been studied and modelled through the extensive use of a new specific test, the Droplet Surface Migration Test. It involves the deposition upon a porous substrate of a small amount of reagent and in studying its subsequent migration and grafting. Whatman paper and various long chain acid chlorides were used for this modelling. The acid chloride carboxylic ends react with the external hydroxyl groups of cellulose fibres to give rise to the formation of long chain hydrophobic ester bonds. Upon immersion of the paper sheet in distilled water, a hydrophobic spot, extending well over the initial depot zone, could then be clearly visualized, allowing to follow conveniently the reagent migration and reaction. Grafting densities were performed by using the HPLC technique.The results obtained through the use of this test allowed a better understanding of chromatogenic chemistry phenomenon and an identification of the main parameters which affect the process: the nature of the reagent, the temperature, the reaction time, the nature of the substrate, etc. We have more particularly shown that the diffusion and grafting yields were maximal for a specific temperature which increases with the boiling point and therefore with the chain length of the reagents. We have proposed that this temperature should correspond to a compromise between the diffusion and reactivity properties of the reagent, its evaporation and its degradation by hydrolysis.

Friedel-Crafts acylation is among the most fundamental and useful reactions to yield aromatic ketones but it is one of the less acceptable in terms of unwanted polluting by-products or atom economy because of the overconsumption of catalyst which is used in stoichiometric quantities in the conventional process. This route is nevertheless widely used in the fine chemical industry.In recent years, awareness of the impact of industrial activities on the environment has led chemists to work on new chemical routes, less dangerous and more environmentally friendly.We considered here the acylation of a benzofurane derivative by an acyl chloride, as an intermediary step for a pharmaceutical product. In this study, one of the first alternatives was to replace conventional catalysts (FeCl3 or AlCl3), by reusable solid catalysts. Indeed, a wide variety of new solid catalysts, more efficient and less polluting, has now emerged (zeolites, ion-exchange resins…). In this work, these catalysts were first tested in “conventional” conditions, i.e., using an organic solvent (1,2-dichlorobenzene in our case), to determine the best one, in terms of reactivity, lifetime and reusability. The zeolite Y was found the most appropriate.However, the use of an organic solvent still remains questionable and the use of supercritical carbon dioxide as the solvent was also considered. Its inherent properties include non-flammability, mild critical conditions, tuneable solubility near to the critical point and very low environmental impact. The reaction was operated using a continuous high pressure fixed bed. Results concerning yield and selectivity are presented.