QM Zobaer

Mr. QM Zobaer


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 February 2017 in International Journal of Damage Mechanics
Verified
Journal Article
Open access
MCMohammad Asaduzzaman Chowdhury
Mohammad Asaduzzaman Chowdhury
AKArefin Kowser
Arefin Kowser
QZQM Zobaer
QM Zobaer
SDSuman Das
Suman Das
Fretting fatigue has attracted substantial research interest in recent decades owing to its relevance in a wide range of applications. This paper reviews previous studies and describes ongoing research. Particularly, only a few studies on bending fretting fatigue have been conducted. This review paper emphasizes the effect of bending fretting fatigue of different materials under different operating parameters. In addition, the damage mechanisms with respect to nature of failure of materials are also discussed. This paper can be used as a reference for design and development of modern technologies and selection of appropriate material in industries.

25 January 2019 in Journal of Failure Analysis and Prevention
Verified
Journal Article
Closed access
PDF file
QZQM Zobaer
QM Zobaer
MCMohammad Asaduzzaman Chowdhury
Mohammad Asaduzzaman Chowdhury
AKArefin Kowser
Arefin Kowser

17 January 2022 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
QZQM Zobaer
QM Zobaer
MKMd Arefin Kowser
Md Arefin Kowser
MCMohammad Asaduzzaman Chowdhury
Mohammad Asaduzzaman Chowdhury
MCMuhammad Tariq Saeed Chani
Muhammad Tariq Saeed Chani
KAKhalid Alamry
Khalid Alamry
Mohammed Muzibur RahmanMohammed Muzibur Rahman
Mohammed Muzibur Rahman
In industrial applications where contact behavior of materials is characterized, fretting-associated fatigue plays a vital role as a failure agitator. While considering connection, it encounters friction. Biomaterials like polytetrafluoroethylene (PTFE) and ultra-high-molecular-weight polyethylene (UHMWPE) are renowned for their low coefficient of friction and are utilized in sophisticated functions like the hip joint cup and other biomedical implants. In addition to the axial stresses, some degree of dynamic bending stress is also developed occasionally in those fretting contacts. This research investigated the fracture behavior of a polymer PTFE under bending fretting fatigue. Finite element analysis justified the experimental results. A mathematical model is proposed by developing an empirical equation for fracture characterization in polymers like PTFE. It was found that the bending stiffness exists below the loading point ratio (LPR) 3.0, near the collar section of the specimen. Along with fretting, the bending load forces the specimen to crack in a brittle-ductile mode near the sharp-edged collar where the maximum strain rate, as well as stress, builds up. For a loading point ratio of above 3, a fracture takes place near the fretting pads in a tensile-brittle mode. Strain proportionality factor, k was found as a life optimization parameter under conditional loading. The microscopic analysis revealed that the fracture striation initiates perpendicularly to the fretting load. The fretting fatigue damage characteristic of PTFE may have a new era for the biomedical application of polymer-based composite materials.

1 June 2020 in Heliyon
Verified
Journal Article
Open access
QZQM Zobaer
QM Zobaer
MCMohammad Asaduzzaman Chowdhury
Mohammad Asaduzzaman Chowdhury
AKArefin Kowser
Arefin Kowser
Biomedical implants like the hip joint with cup work under continuous friction and wear phenomena where soft materials are suitable for the low coefficient of friction. As continuous, joints go under dynamic fatigue that should be accelerated by the fretting action generated from contact pairs and the inclination angle of the femur. In this research, the fatigue behavior of PTFE has been studied and compared under friction along with fretting action. A FE based Numerical model justified the experimental results. It showed that fretting and friction influence the fatigue life of PTFE by various angles. Fretting pressure optimization was identified as the determinant factor, while the loading point ratio was remarked as an effective parameter for both fretting and friction fatigue. Penetration depths proportionality to corresponding stress observed the effect of fretting fatigue where friction acts in different degrees depending on the geometry (collar/notch)-loading (friction) position. The fractographical demonstration revealed a relation between crack orientation and fretting action. Predefined loading action on test samples justified the singularity of fretting-friction fatigue characteristics on the damage mechanism of PTFE.

21 August 2019 in SN Applied Sciences
Verified
Journal Article
Open access
PDF file
QZQM Zobaer
QM Zobaer
MCMohammad Asaduzzaman Chowdhury
Mohammad Asaduzzaman Chowdhury
AKArefin Kowser
Arefin Kowser
Fretting fatigue has emerged as the center of interest for research in recent decades due to its high importance in real application field. Despite this advancement, comparatively few experiments as well as studies have been accomplished on bending fretting fatigue. Researchers either developed new test rigs or accepted a conventional concept since there exists no specific, standalone and standard test rig. However, as it is difficult to compare each work with others, the increasing number of test rigs are not suitable to ensure the justified results under conditional circumstance. This article classified the existing bending fretting fatigue test rigs depending on the variable parameters like fretting and loading actions. It can be mentioned that reciprocating fretting fatigue test rigs have more diversities as compared to rotary fretting fatigue test rigs due to the advantages of variable loading values, displacement controlling, fretting damage pre-determination and other desirable purposes. This article might be useful as a state of art for future contributions of the modern technology in industrial applications.

18 December 2019 in Australian Journal of Mechanical Engineering
Verified
Journal Article
Closed access
QZQM Zobaer
QM Zobaer
MKM. Arefin Kowser
M. Arefin Kowser
MCMohammad Asaduzzzaman Chowdhury
Mohammad Asaduzzzaman Chowdhury
This research investigated the effect of variable fretting parameters on bending fatigue behaviour of heat-treated Al-Mg-Si alloy (Al 6061-T6). Bulk stress, contact pressure, pad geometry, and locations were chosen as variable parameters to measure its consequence on fatigue life. A developed FEM model justified the experimental observation. It observed that, within the lower bulk stress range, fretting action decreases the fatigue life of Aluminium alloy significantly than the plain one. However, this difference almost vanishes at higher-order loading as well as stress in comparison to plain fatigue. Contact pressure and stress distribution along the contact path and non-filleted-edge suggest about the importance of safety design over the fretting zones. The flat on cylinder contacts was found as detrimental at higher-order contact pressure while cylinder on cylinder one reduces notably at low contact pressure. Fuzzy logic, a soft computing technique was implemented to predict the fretting fatigue as well as the effect of pad location from surface graphs. Nevertheless, catastrophic rupture followed the aspect of fretting loading parameter that showed fretting not only affects in quantity but also the quality of the fatigue behaviour of Al 6061-T6.