Enes Sukic

Prof. Dr. Enes Sukic


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 October 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
PMPredrag Slobodan Miitić
Predrag Slobodan Miitić
Suzana R Petrovic SavicSuzana R Petrovic Savic
Suzana R Petrovic Savic
Aleksandar DjordjevicAleksandar Djordjevic
Aleksandar Djordjevic
MEMilan Erić
Milan Erić
ESEnes Sukic
Enes Sukic
Miladin StefanovicMiladin Stefanovic
Miladin Stefanovic
This research focuses on small- and medium-sized businesses that provide machining or other process services but do not produce their own products. Their daily manufacturing schedule varies according to client needs. Small- and medium-sized businesses strive to operate in these circumstances by extending their customer base and creating adequate production planning targets. Their resources are limited, including the technical and technological components of their equipment, tools, people resources, time, and capacities. As a result, planning operations with the present resources of small- and medium-sized businesses in the midst of the global economic crisis is a widespread issue that must be addressed. This study seeks to offer a novel mathematical optimization model based on a genetic algorithm to address job shop scheduling and capacity planning difficulties in small- and medium-sized businesses, therefore improving performance management and production planning procedures. On the basis of the created optimization model, an appropriate software solution, and quantitative data concerning the job shop scheduling and capacity planning challenges of manufacturing operations in small- and medium-sized businesses, the study findings will be obtained. The practical implications include the establishment and development of a decision support system based on the genetic algorithm optimization method, which may improve the effectiveness of the flexible job shop scheduling problem and capacity planning in the production planning process. The given model and the application of the differential precedence preservative crossover operator within genetic algorithms are what constitute the novelty of this study.

17 November 2023 in Polish Journal of Environmental Studies
Verified
Journal Article
Open access
ANAyoub A. Nasr
Ayoub A. Nasr
MPMirjana Puharić
Mirjana Puharić
IIIvana Ilić
Ivana Ilić
ISIvica Stanković
Ivica Stanković
ESEnes Sukic
Enes Sukic
Noise generated by air traffic is one of the leading problems in urban areas in the world. That is why the measures for reducing the noise generated by air traffic are today the subject of constant improvement, extensive research, and standardization. Monitoring and predicting air traffic noise levels represent an important factor in quality control and noise management. In order to reduce the noise level in the vicinity of Mitiga International Airport (Tripoli) in Libya, the aim of this paper is to assess the noise emission levels before and after the introduction of certain measures to reduce airborne noise, as well as to predict the noise level at the analyzed area. The method of interpolation in the Geographic Information System (GIS) was used to graphically represent the spatial distribution of noise emissions in the study area, and by applying zonal statistics deviations from the allowable values for each control grid were calculated. The obtained results showed that the application of certain measures has a great impact on reducing noise levels on controlled grids. Finally, the reliability of noise level prediction was successfully assessed using the artificial neural network (ANN) method.

25 October 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MMMatúš Martiček
Matúš Martiček
RTRebeka Tauberová
Rebeka Tauberová
JKJakub Kaščak
Jakub Kaščak
RVRadoslav Vandžura
Radoslav Vandžura
ESEnes Sukic
Enes Sukic
Lucia KnapcikovaLucia Knapcikova
Lucia Knapcikova
In recent years, sustainability has permeated nearly every aspect of our lives, and the manufacturing sector is no exception. The terms “sustainable manufacturing” and “zero-waste manufacturing” are now part of our everyday vocabulary. This study, which explores the influence of key parameters on the filament extrusion process using recycled polyvinyl butyral (PVB), which is an amorphous polymer commonly obtained from the glass recycling industry, has significant practical implications. By determining the optimal conditions for the extrusion process, we can enhance the mechanical properties of the produced PVB filament yarns and their printability. As a result of identifying errors, optimizing the process, and eliminating the resulting shortcomings, a fiber made of PVB material with a diameter of 1.75 mm (±0.06 mm) was created that can be used in most FDM devices. The length of the created fiber was approx. 20 m, and in the presentation of the results, it will be used for printing samples, adhesion tests to the printing mat, shrinkage tests, and tensile tests of the fiber. After removing all the shortcomings, the ideal extrusion temperature was at 155 °C. This temperature was verified using microscopic cross-sections, and deformations or changes were observed in their cross-sections. The deviation of the material currently undergoing testing for the adhesion of PVB to various types of print beds, which was found suitable for use in FFF devices, was 1.75 −0.25/+0.25. This, in turn, can significantly expand the application of these materials in additive manufacturing, thereby making a substantial contribution to the advancement of sustainable manufacturing.

4 November 2021 in Processes
Verified
Journal Article
Open access
PDF file
MFMarian Flimel
Marian Flimel
Darina DuplákováDarina Dupláková
Darina Dupláková
ESEnes Sukic
Enes Sukic
Subjectively, to verify the human perception of the state of satisfaction with the environment it is necessary to use objective methods. One of these methods is the heat flux measuring method. This paper points out the risk factors that affect the heat transfer coefficient H through building structures that are necessary to determine the projected heat input of the building. At the operation stage, the aforementioned structures are affected by environmental factors (noise, artificial lighting, heat sources). This changes the suggested value Hc to the real value Hr, which is documented by the measurements. The rate of change of the H value is given by the correction “K”. According to the measurements the value obtained can be corrected from 0.08 to 0.25. The final values of the heat transfer coefficient were generalized in the equation and the value of the building energy category within the energy certification of buildings was determined. The result is a methodology for the optimal determination of H values for hazard prevention.

1 January 2019 in International Journal for Quality Research
Verified
Journal Article
Closed access
ISIñaki Salinas
Iñaki Salinas
Isaac LeraIsaac Lera
Isaac Lera
Computer DeparmentComputer Deparment
Computer Deparment
Carlos JuizCarlos Juiz
Carlos Juiz
ESEnes Sukic
Enes Sukic

14 March 2024 in Comptes Rendus Mécanique
Verified
Journal Article
Closed access
PDF file
RZRoumaissa Zenzen
Roumaissa Zenzen
AAAyoub Ayadi
Ayoub Ayadi
BBBrahim Benaissa
Brahim Benaissa
IBIdir Belaidi
Idir Belaidi
ESEnes Sukic
Enes Sukic
TKTawfiq Khatir
Tawfiq Khatir
In recent years, substantial investments in structural construction underscore the paramount importance of ensuring structural integrity for safety and dependability. Structural Health Monitoring (SHM) has emerged as a pivotal tool for assessing structural health, with an emphasis on damage detection, localisation, and quantification, particularly through vibration-based methods that exploit variations in modal properties as precursors to structural damage. This study presents an innovative methodology that synergistically combines Proper Orthogonal Decomposition and Radial Basis Function interpolation for predicting structural responses based on crack parameters. Additionally, the YUKI algorithm, leveraging population clustering for optimisation, is introduced. The approach is rigorously assessed through experimental analysis of two distinct beams (Beam I and Beam II) exhibiting varying crack depths. The results demonstrate the effectiveness of the POD-RBF-YUKI approach, indicating a notable level of accuracy and consistency. Comparative evaluations with conventional optimisation algorithms, namely Cuckoo, Bat, and Particle Swarm Optimisation, reveal similar Mean Percentage Error values but with increased result variability, whereas Deep Artificial Neural Network models with varied hidden layer sizes.