This paper represents the design and FEM modeling of solidly mounted film bulk acoustic resonator (SMFBAR) gas sensor, based on ZnO, for volatile organic gas detection. The effect of sensitive polyisobutylene(PIB) layer coating on mass sensitivity has been analyzed along with optimization of the layer thickness. The proposed structure shows good quality factorof 758,at resonance condition, and a coupling coefficient of 7.36% for the piezoelectric layer with 2 μm thickness. SMFBAR sensor was tested for detection of various gases such as, Tetrachloroethane(PCE), Trichloroethylene (TCE), Trichloromethane(TCM) and chloromethane (CM), with PIB layer as the sensing element. Enhanced sensitivity of 21kHz/ppm has been achieved for detection of Tetrachloroethane (PCE) gas. FEM Modeling has been done on COMSOL Multiphysics software and a resonant frequency of 1.38 GHz has been observed for ideal environment. The sensor was tested for various gas concentrations ranging from 100 to 1000 ppm of volatile organic gases.
1 December 2019 in Journal of Electronic Materials