This research article presents a comprehensive investigation into the design, optimization, and performance analysis of a hybrid stand-alone microgrid for an industrial facility in Iraq at coordinates 36.51 and 43.99. The system consists of photovoltaic (PV) modules, inverters, a battery energy storage system (BESS), a generator, and AC loads. Leveraging the capabilities of PVsyst version 7.3.1, HOMER Pro version 3.14.2 and SAM version 2022.11.21 software tools, this study assesses the feasibility and functionality of the hybrid stand-alone microgrid. In this study, PVsyst software is used for detailed designing and analysis of a PV plant, and the PVsyst design file is then used in HOMER Pro software to optimize and design the proposed hybrid stand-alone microgrid, and for detailed performance analysis SAM software is employed. This paper also investigates the impact of ground clearance and ground albedo on the annual generation of bifacial PV modules at various tilt angles. Key findings include a promising normalized production rate of 4.53 kWh/kWp/day with a performance ratio of 0.815 and annual energy production estimates of 84.31 MWh (P50), 79.57 MWh (P90), and 78.24 MWh (P95) for monofacial PV modules, highlighting the system’s potential for renewable energy generation. Notably, this research demonstrates the hybrid stand-alone microgrid’s capacity to significantly reduce CO₂ emissions, saving approximately 1811.6 tons over a 30-year period, thus contributing to sustainability and environmental conservation goals. Additionally, this study reveals operational challenges during the winter months, necessitating generator support to meet load demands. The successful installation and experimental validation of the hybrid stand-alone microgrid underscore its practical viability and its role in advancing clean energy solutions. This research provides valuable insights into hybrid stand-alone microgrid design, emphasizing its importance in ensuring reliable power supply and environmental stewardship.

A hybrid microgrid powered by hydrogen is an energy infrastructure that depends on hydrogen as its primary energy carrier within a localized network. This study proposed a novel bi-level optimization approach to enhance power quality and cost efficiency of the system. In the quest to improve energy management systems (EMS) and enhance power quality, a bi-level optimization approach named Particle swarm optimization-Modified water wave optimization (PSO-MWWO) has been proposed. This method integrates adaptive population size and an adaptive wavelength coefficient to boost its overall effectiveness. It is attractive with specialists in energy management systems (EMS), control systems, and hydrogen technologies can significantly augment the efficiency of coordination endeavours. PSO-MWWO can incorporate environmental considerations, such as minimizing emissions or exploiting the use of renewable energy resources (RESs) in hydrogen production and consumption. This paper thoroughly examines its implementation, operation, and unique features, with a particular emphasis on the power quality of a hydrogen based microgrid. The achieved results and numerical analysis affirm the superiority of the proposed technique compared to other traditional methods like mixed integer linear programming (MILP), HOMER, Variable mesh optimization (VMO), and Cataclysmic genetic algorithm in optimizing component sizing, renewable production, hydrogen production, reliability, cost effective, and overall efficacy. This substantiates its practical utility in real-time applications. The efficacy of this method is empirically demonstrated through the implementation in MATLAB software.

This research proposes an improved finite control set direct power model predictive control method (FCS-DPMPC) for grid-tie distributed generation (DG). FCS-DPMPC predicts the system outcomes using the system model. During the next sampling time, a voltage vector is defined using the cost function to minimize the power ripple, consequently allowing flexibility for power regulation. Furthermore, the impact of implementing a one-step delay is studied and compensated through a model forecast pattern. In addition, a new two-step horizon technique has been developed to minimize switching frequency and computation burden. Simulation results for single DG and parallel operated DGs in a grid-tie manner confirm the effectiveness of the suggested control strategy, which signifies that this is an appropriate approach for distributed generation in microgrids.

The demand for power demand and nonlinear loads is currently increasing, and thus a compensator that can efficiently afford compensation with growing or reducing load requirement and available transmission network resources are necessary. In this study, we implemented serial FACTS devices, namely, static series synchronous compensator (SSSC) and thyristor-controlled series compensator (TCSC), to increase the power capacity flow in an electric power network. We primarily aim to increase the load capability of the system to maintain system stability after a fault transient. Therefore, we implemented series FACTS devices SSSC and TCSC to maintain stability after a fault transient. Performance result of considered series FACTS controller shows an unstable steady state without a power system stabilizer. This paper presents modeling and simulation of SSSC and TCSC in MATLAB/Simulink to maintain transient stability.

This study aimed to develop a cost-effective, environmentally sustainable, and technologically advanced dielectric fluid by utilizing the beneficial properties of natural ester-based vegetable oils, offering a promising alternative for transformer insulation and cooling applications. The novelty of this research lies in the formulation of a nanofluid that combines three distinct vegetable oils—castor, flaxseed, and blackseed—creating a unique base fluid. SiO₂ nanoparticles were incorporated into the fluid to leverage their multiple advantageous characteristics. Extensive experiments were conducted to evaluate the superior properties of the proposed nanofluid, focusing on key dielectric properties, such as relative permittivity (ε_r) and the dielectric dissipation factor (tan δ). Comparative analyses with conventional mineral oil, which was used as a benchmark, demonstrated the significant advantages of the vegetable oil-based nanofluid. The novel formulation outperformed all other tested samples, highlighting its exceptional performance. Additionally, three preparation methods were examined, with the green synthesis technique producing the nanofluid with better dielectric properties. Through a detailed presentation of empirical data and compelling arguments, this study confirms the potential of natural ester-based vegetable oil nanofluids as a highly promising alternative, driven by their intrinsic properties and the environmentally friendly synthesis method employed.