Laser space networks are an important development direction for inter-satellite communication. Detecting the angle of arrival (AOA) of multiple satellites in a wide field of view (FOV) is the key to realize inter-satellite laser communication networking. The traditional AOA detection method based on the lens system has a limited FOV. In this paper, we demonstrate a system that uses a spatially distributed sensor array to detect the AOA in a wide FOV. The basic concept is to detect AOA using the signal strength of each sensor at different spatial angles. An AOA detection model was developed, and the relationship of key structural parameters of the spatially distributed sensor array on the FOV and angular resolution was analyzed. Furthermore, a spatially distributed sensor array prototype consisting of 5 InGaAs PIN photodiodes distributed on a 3D-printed structure with an inclination angle of 30° was developed. In order to improve the angle calculation accuracy, a multi-sensor data fusion algorithm is proposed. The experimental results show that the prototype’s maximum FOV is 110°. The root mean square error (RMSE) for azimuth is 0.6° within a 60° FOV, whereas the RMSE for elevation is 0.67°. The RMSE increases to 1.1° for azimuth and 1.7° for elevation when the FOV expands to 110°. The designed spatially distributed sensor array has the advantages of a wide FOV and low size, weight, and power (SWaP), presenting great potential for multi-satellite laser communication applications.
Measurement of the degree of polarization of backscattering light from rough surfaces plays an important role in targets-detection applications. The polarization bidirectional reflectance function is the key to establish the relation between the polarization states of incidence and backscattering light. For the purpose of obtaining a polarized bidirectional reflectance distribution function (pBRDF) of a realistic, complicated target, it is decomposed as typical geometric surfaces and analytically calculated as the degree of polarization of the backscattering light, using a microfacet model, under conditions in which the scale of the target is far less than the target distance. In an experiment testing several typical geometric models, the results coincided with the theoretical calculation. The degree of polarization varied substantially as the rotation angle of the target changed, but showed little dependence on the size of target. The results have potential in applications discriminating between targets at different spatial orientations.
Integrated optical phased array (OPA) chips enable high-speed beam steering via electronic phase control, providing a promising solution for compact pointing, acquisition, and tracking (PAT) systems. However, OPA-PAT systems must simultaneously achieve wide-field-of-view (FOV) coverage and high-precision angle-of-arrival (AOA) detection. To address this challenge, a cascaded AOA detection method based on a multi-sensor collaborative architecture is proposed. This approach utilizes a distributed detector array (DA) for coarse incident angle estimation over a wide-FOV, which then guides a two-dimensional (2D) galvanometer to steer the beam into a quadrant detector (QD) for fine measurement within a narrow-FOV. A prototype system is developed to validate the proposed cascaded algorithm. Experimental results show that within a ±20° FOV, the proposed system achieves root-mean-square errors (RMSEs) of 0.007° in azimuth and 0.01° in elevation. When integrated into an OPA-PAT terminal, static 2D closed-loop tracking is maintained with an overall tracking error better than 0.016° (RMSE). These results demonstrate that the proposed cascaded detection method can simultaneously provide wide-FOV coverage and high-precision AOA measurement, offering a practical solution for wide-FOV OPA-PAT systems.
Focusing on the problems of difficult alignment and low efficiency when coupling the spatially scattered light from 532 nm underwater LiDAR to a single-mode fiber, this paper presents an analysis and simulation of the coupling principle of spatially scattered light and its influencing factors based on the extended light source imaging model, and designs and develops a spatially scattered light adaptive coupling system. The system adopts a three-lens set to receive spatially scattered light, combines a fast steering mirror and displacement stage to adjust the beam position dynamically, and realizes the automatic and efficient coupling of spatially scattered light through a joint control strategy combining rough alignment and precise alignment (using the improved simulated annealing SPGD algorithm). The experimental results show that the best coupling efficiency reaches 88.18% of the theoretical value after program adjustment. This represents an approximate 88% improvement over the best coupling efficiency obtained after manual adjustment, whilst the algorithm effectively circumvents the issue of local optima. This study provides a feasible adaptive solution for underwater LiDAR and similar applications involving scattered light coupling.