The 101-channel full-waveform hyperspectral LiDAR (FWHSL) is able to simultaneously obtain geometric and spectral information of the target, and it is widely applied in 3D point cloud terrain generation and classification, vegetation detection, automatic driving, and other fields. Currently, most waveform data processing methods are mainly aimed at single or several wavelengths. Hidden components are revealed mainly through optimization algorithms and comparisons of neighbor distance in different wavelengths. The same target may be misjudged as different ones when dealing with 101 channels. However, using the gain decomposition method with dozens of wavelengths will change the spectral intensity and affect the classification. In this paper, for hundred-channel FWHSL data, we propose a method that can detect and re-decompose the channels with outliers by checking neighbor distances and selecting specific wavelengths to compose a characteristic spectrum by performing PCA and clustering on the decomposition results for object identification. The experimental results show that compared with the conventional single channel waveform decomposition method, the average accuracy is increased by 20.1%, the average relative error of adjacent target distance is reduced from 0.1253 to 0.0037, and the degree of distance dispersion is reduced by 95.36%. The extracted spectrum can effectively characterize and distinguish the target and contains commonly used wavelengths that make up the vegetation index (e.g., 670 nm, 784 nm, etc.).
Graphene quantum dots (GQDs), fascinating semiconductors with stable photoluminescence (PL), have important potential applications in the fields of biology, medicine, and new semiconductor devices. However, it is still challenging to overcome the weak PL intensity. Here, we report a strategy for selective resonance enhancement of GQD fluorescence using gold nanoparticles (AuNPs) as plasmas. Interestingly, the addition of low concentration AuNP makes AuNP/GQDs exhibit significant fluorescence enhancement of 2.67 times in the visible range. The addition of high concentration AuNP leads to the formation of an excitation peak at 421 nm and selectively enhances certain radiation modes. We concluded that the main reason for the selective enhancement of PL intensity in high concentration AuNP is the transfer of generous hot electrons at high energy states from AuNP to GQD and relaxation to the ground state. The electron resonance of low concentration AuNP transfers to GQD and relaxes to lower energy levels, exhibiting an overall enhancement of PL intensity. We apply it for detection of the heavy metal ion Cr3+, and verify that it has a correlation coefficient of 97.36%. We believe AuNP/GQDs can be considered excellent candidates for heavy metal detection and high fluorescence bio-imaging.
In the long-distance space target detection, the technique of laser reflection tomography (LRT) shows great power and attracts more attention for further study and real use. However, space targets are often non-cooperative, and normally a 360° complete view of reflection projections cannot be obtained. Therefore, this article firstly introduces an improved LRT system design with more advanced laser equipment for long-distance non-cooperative detection to ensure the high quality of the lidar beam and the lidar projection data. Then, the LRT image reconstruction is proposed and focused on the laser image reconstruction method utilizing the total variation (TV) minimization approach based on the sparse algebraic reconstruction technique (ART) model, in order to reconstruct the laser image in a sparse or incomplete view of projections. At last, comparative experiments with the system are performed to validate the advantages of this method with the LRT system. In both near and far field experiments, the effectiveness and superiority of the proposed method are verified for different types of projection data through comparison to typical methods.
3 April 2023 in International Journal of Remote Sensing
The relationship between the axial structures of three-dimensional (3-D) targets and the signal of the remote-sensing techniques, such as the modulated echo waveform of the full-waveform light detection and ranging (FW-LiDAR), has been well established. However, the relationship between the lateral structures on modulated echo waveform has not been exploited in detail. For FW-LiDAR, the peak intensity, rather than the shape and width, of the echo waveform reflects lateral structural information. Using four typical two-dimensional shapes to approach the lateral structures, a mathematical formula bridging the peak intensity and the lateral structures is derived. Based upon the echo waveform simulated using the formula, modulations of the lateral structural information on the peak intensity are examined to establish a database of target properties, including shape, size and position. The physics regarding peak intensity dependence on target position is used for facile shape recognition. The modulation of the lateral shapes of ground and aerial targets on the FW-LiDAR can be assessed extensively following the procedure demonstrated in this paper. Owing to the conciseness, the peak intensity formula enables the retrieval of lateral structural information by inversion, promoting the applications of FW-LiDAR in domains including topological mapping, ecological monitoring and space debris detection and removal.
10 May 2024 in IEEE Transactions on Wireless Communications
Elliptic positioning system offers a precise alternative to global navigation satellite system (GNSS). However, ranging measurements upon a single UAV only delineate the location estimates to a spherical region. Data infusion from inertial measurement units (IMUs) may refine these estimates, while its fidelity is undermined by IMUs’ lack of self alignment to a specified reference frame. In this paper, we explore the minimal number of assisted UAVs or anchors for absolute positioning, i.e., location and alignment in a fixed frame, during complete GNSS outages. We first prove that the observability establishes under a UAV in a 3-D trajectory or a pair of static anchors. The two numbers are new theoretical limit, significantly lower than the three anchors in 2-D or four in 3-D scenarios required by traditional theorems. We propose a sequential scheme for the multi-parameter estimation problem ensuring rapid convergence. An iterative solution is derived, flexible to UAV and anchor-based configurations, that provides instant location updates free of computational overhead. Thereafter, we also circumvent NLOS effects by employing inverse estimation of range. Accordingly, we devise a tiered positioning framework that commences with a location-unknown UAV to first cooperate with LOS anchors, and then extend the service to UE via a single NLOS link outside anchors’ coverage. In the experiments, the proposed scheme reaches (10 −2 )° orientation alignment and centimeter-level accuracy in NLOS scenarios, which attains the Cramer-Rao lower bound (CRLB) accuracy. Moreover, the accuracy notably exceeds the noise level of ranging measurements at high sampling rate, and also shows robustness against local clock drifting.
Removal of the numerous centimeter-level space debris in low Earth orbit by using high-power lasers is always a hot topic of international academic research. Specifically, the precise positioning of space debris and high-precision measurement of barycenter range of debris are the key points and worldwide problems that need to be promptly solved. As a new remote high-resolution imaging method, laser reflective tomography is an effective approach to detecting the dark targets in remote space with its imaging resolution independent of the detection range. Hence, a centimeter-level space debris barycenter model is established according to the principle of laser reflective tomography in order to analyze the relative movement of debris and detector. On this basis, an approach to estimating the barycenter range of centimeter-level space debris is proposed to carry out the experimental verification of 1km detection range laser reflective tomography. The experimental results show that this method can improve the accuracy of barycenter detection from 1.50 cm to 0.34 cm, which is an effective measure for realizing high-precision measurement of barycenter ranges of centimeter-level space debris. Furthermore, this study achieves a breakthrough in kilometer-level laser reflective tomography experiments and theory of validation, and the kilometer-level laser reflective tomography has a great application prospect and technical potential.