We experimentally demonstrate high-speed visible light communication (VLC) and high-quality solid-state lighting (SSL) using polymethyl-methacrylate-doped phosphor film based on cesium lead bromide quantum dot (-QD) and potassium fluorosilicate, which is excited by a blue gallium nitride laser diode. A 1.6 Gbps data rate is achieved by employing a non-return-to-zero on–off keying modulation scheme. The measured bit error rate ofadheres to the standard threshold () of forward error correction. Moreover, the generated white-light source has a high color rendering index of 93.8 and a correlated color temperature of 4435 K, and it exhibits a Commission Internationale de l’Eclairage (CIE) 1931 chromaticity coordinate at (0.3556, 0.3520), which is close to the ideal CIE value of white light (0.3333, 0.3333). This work opens up exciting possibilities for future high-speed indoor VLC and high-quality SSL.
In recent years, cesium lead bromide (CsPbBr3) and cadmium selenide/zinc sulfide (CdSe/ZnS) quantum dots have been widely investigated to enhance the capacity of visible light communication (VLC) and solid-state lighting (SSL). Herein, liquid-phase color converter (LCC) glass cavities and solid-phase color converter (SCC) films with green-emitting CsPbBr3 and red-emitting CdSe/ZnS are fabricated to investigate and compare their performance. A facile high-quality LCC-based white laser diode (WLD) is fabricated by combining blue LD with LCC CsPbBr3 and CdSe/ZnS glass cavities as color conversion layers. The LCC-based WLD achieves bright white light with a color rendering index of 85, a correlated color temperature of 5520 K, and a Commission Internationale de L'Eclairage (CIE) coordinates at (0.32, 0.34). Moreover, the VLC system exhibits a modulation bandwidth of 855 MHz and the capability to transmit a real-time data rate of up to 2.1 Gbps over a transmission distance of 1.2 meters. These results indicate that the fabricated WLD is a promising lighting device for simultaneous high-speed VLC and high-efficiency SSL.
In the past decade, underwater spectral imaging (USI) has shown great potential in underwater exploration for its high spectral and spatial resolution. This proposal presents a stare-type USI system combined with the liquid crystal tunable filter (LCTF) spectral splitting device. Considering the working features of LCTF and the theoretical model of USI, the core structure containing “imaging lens-LCTF-imaging sensor” is designed and developed. The system is compact, and the optical geometry is constructed minimally. The spectral calibration test analysis proved that the spectral response range of the system covers a full band of 400 nm to 700 nm with the highest spectral resolution between 6.7 nm and 18.5 nm. The experiments show that the system can quickly collect high-quality spectral image data by switching between different spectral bands arbitrarily. The designed prototype provides a feasible and reliable spectral imaging solution for in situ underwater targets observation with high spectrum collecting efficiency.
This letter presents a novel unipolar scheme called X-transform optical orthogonal frequency division multiplexing with index modulation (XO-OFDM-IM) for underwater optical wireless communication (UOWC). Unlike the conventional schemes, each modulated data in XO-OFDM-IM is transmitted via one or two subcarriers; and the information bits carried by the index of subcarriers are used to produce positive and real time-domain signal without the need for adding direct current (DC) bias or clipping processes. The performance of the proposed scheme has been evaluated via a 2-meter measured UOWC channel to validate its outperformance against its benchmarks. For instance, our scheme offers up to 7 dB improvement in term of signal to noise ratio at a target bit error rate (BER) of 10−4 and up to 8 dB in term of peak-to-average power ratio (PAPR) compared to its counterpart asymmetrically clipped O-OFDM (ACO-OFDM) when considering the same spectral efficiency (SE).
25 September 2023 in Journal of Lightwave Technology
Pilot assisted (PA) technique is a promising method for reducing the peak-to-average power ratio (PAPR) in direct-current optical orthogonal frequency division multiplexing (DCO-OFDM). However, this technique still suffers from the deterioration of spectral efficiency (SE) due to the transmitted side information (SI), high required computational complexity (CC) and performance degradation in harsh environments like underwater wireless optical communications (UWOC) systems. To address these issues, this article presents a novel and efficient PA technique called efficient PA-DCO-OFDM (E-PA-DCO-OFDM). The proposed scheme overcomes the SE deterioration and high CC by transmitting only the index of the candidate pilot that provides the best PAPR reduction instead of transmitting the entire pilot data physically, and also decomposing the inverse fast Fourier transforms (IFFT) into two low-complexity matrices to avoid performing several IFFTs. Moreover, in challenging UWOC environments, the modulated data related to the index of the candidate pilot can be transmitted multiple times to guarantee the correct detection at the receiving end and enhance the overall performance without affecting the achieved SE. The proposed scheme is evaluated through simulation and experimental tests performed over a 2-meter UWOC system. For instant, E-PA-DCO-OFDM reduces the CC by up to 52.4% and significantly improves the SE compared to the conventional PA-DCO-OFDM with identical performance in terms of BER and PAPR. The proposed scheme's outperformance is also evaluated against existing benchmarks in terms of bit error rate (BER), achieved SE, PAPR, energy efficiency (EE), and CC.