There is a constant drive for development of ultrahigh performance multifunctional construction materials by the modern engineering technologies. These materials have to exhibit enhanced durability and mechanical performance, and have to incorporate functionalities that satisfy multiple uses in order to be suitable for future emerging structural applications. There is a wide consensus in the research community that concrete, the most used construction material worldwide, has to be engineered at the nanoscale, where its chemical and physiomechanical properties can be truly enhanced. Here, an innovative multifunctional nanoengineered concrete showing an unprecedented range of enhanced properties when compared to standard concrete, is reported. These include an increase of up to 146% in the compressive and 79.5% in the flexural strength, whilst at the same time an enhanced electrical and thermal performance is found. A surprising decrease in water permeability by nearly 400% compared to normal concrete makes this novel composite material ideally suitable for constructions in areas subject to flooding. The unprecedented gamut of functionalities that are reported in this paper are produced by the addition of water‐stabilized graphene dispersions, an advancement in the emerging field of nanoengineered concrete which can be readily applied in a more sustainable construction industry.

Wearable technologies are driving current research efforts to self‐powered electronics, for which novel high‐performance materials such as graphene and low‐cost fabrication processes are highly sought.The integration of high‐quality graphene films obtained from scalable water processing approaches in emerging applications for flexible and wearable electronics is demonstrated. A novel method for the assembly of shear exfoliated graphene in water, comprising a direct transfer process assisted by evaporation of isopropyl alcohol is developed. It is shown that graphene films can be easily transferred to any target substrate such as paper, flexible polymeric sheets and fibers, glass, and Si substrates. By combining graphene as the electrode and poly(dimethylsiloxane) as the active layer, a flexible and semi‐transparent triboelectric nanogenerator (TENG) is demonstrated for harvesting energy. The results constitute a new step toward the realization of energy harvesting devices that could be integrated with a wide range of wearable and flexible technologies, and opens new possibilities for the use of TENGs in many applications such as electronic skin and wearable electronics.

The true integration of electronics into textiles requires the fabrication of devices directly on the fibre itself using high-performance materials that allow seamless incorporation into fabrics. Woven electronics and opto-electronics, attained by intertwined fibres with complementary functions are the emerging and most ambitious technological and scientific frontier. Here we demonstrate graphene-enabled functional devices directly fabricated on textile fibres and attained by weaving graphene electronic fibres in a fabric. Capacitive touch-sensors and light-emitting devices were produced using a roll-to-roll-compatible patterning technique, opening new avenues for woven textile electronics. Finally, the demonstration of fabric-enabled pixels for displays and position sensitive functions is a gateway for novel electronic skin, wearable electronic and smart textile applications.

Transparent and flexible electrodes are widely used on a variety of substrates such as plastics and glass. Yet, to date, transparent electrodes on a textile substrate have not been explored. The exceptional electrical, mechanical and optical properties of monolayer graphene make it highly attractive as a transparent electrode for applications in wearable electronics. Here, we report the transfer of monolayer graphene, grown by chemical vapor deposition on copper foil, to fibers commonly used by the textile industry. The graphene-coated fibers have a sheet resistance as low as ~1 kΩ per square, an equivalent value to the one obtained by the same transfer process onto a Si substrate, with a reduction of only 2.3 per cent in optical transparency while keeping high stability under mechanical stress. With this approach, we successfully achieved the first example of a textile electrode, flexible and truly embedded in a yarn.

Conducting fibres are essential to the development of e-textiles. We demonstrate a method to make common insulating textile fibres conductive, by coating them with graphene. The resulting fibres display sheet resistance values as low as 600 Ωsq⁻¹, demonstrating that the high conductivity of graphene is not lost when transferred to textile fibres. An extensive microscopic study of the surface of graphene-coated fibres is presented. We show that this method can be employed to textile fibres of different materials, sizes and shapes, and to different types of graphene. These graphene-based conductive fibres can be used as a platform to build integrated electronic devices directly in textiles.