Muhammad Umair Shahid

Dr. Muhammad Umair Shahid

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 March 2015 in Applied Nanoscience
Verified
Journal Article
Open access
PDF file
MSMuhammad Umair Shahid
Muhammad Umair Shahid
Kashif Mairaj DeenKashif Mairaj Deen
Kashif Mairaj Deen
AAA. Ahmad
A. Ahmad
MAM. A. Akram
M. A. Akram
MAM. Aslam
M. Aslam
WAW. Akhtar
W. Akhtar
In this study, pure ZnO and Al-doped ZnO thin films were developed on glass by sol–gel process followed by drying and annealing in air at 170 and 400 °C, respectively. The surface morphology and structural characteristics were determined through scanning electron microscopy, atomic force microscopy and X-ray diffraction. The Fourier transform infrared spectroscopy validated the formation of Al-doped ZnO film on glass substrate. It was evaluated that 1 at% aluminum (Al) doping in ZnO film showed low electrical resistivity and higher charge carrier concentration due to uniformly dispersed regular shape crystallites as compared to pure ZnO and 2 at% ‘Al’-doped thin films.

19 March 2020 in Coatings
Verified
Journal Article
Open access
PDF file
SZSiti Nur Azella Zaine
Siti Nur Azella Zaine
NMNorani Muti Mohamed
Norani Muti Mohamed
MKMehboob Khatani
Mehboob Khatani
ASAdel Eskandar Samsudin
Adel Eskandar Samsudin
MSMuhammad Umair Shahid
Muhammad Umair Shahid
The dynamic competition between electron generation and recombination was found to be a bottleneck restricting the development of high-performance dye-sensitized solar cells (DSSCs). Introducing a passivation layer on the surface of the TiO2 photoelectrode material plays a crucial role in separating the charge by preventing the recombination of photogenerated electrons with the oxidized species. This study aims to understand in detail the kinetics of the electron recombination process of a DSSC fabricated with a conductive substrate and photoelectrode film, both passivized with a layer of nanocrystalline TiO2. Interestingly, the coating, which acted as a passivation layer, suppressed the back-electron transfer and improved the overall performance of the integrated DSSC. The passivation layer reduced the exposed site of the fluorine-doped tin oxide (FTO)–electrolyte interface, thereby reducing the dark current phenomenon. In addition, the presence of the passivation layer reduced the rate of electron recombination related to the surface state recombination, as well as the trapping/de-trapping phenomenon. The photovoltaic properties of the nanocrystalline-coated DSSC, such as short-circuit current, open-circuit voltage, and fill factor, showed significant improvement compared to the un-coated photoelectrode film. The overall performance efficiency improved by about 22% compared to the un-coated photoelectrode-based DSSC.

30 November 2018 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
NMNorani Muti Mohamed
Norani Muti Mohamed
MSMuhammad Umair Shahid
Muhammad Umair Shahid
BSBalbir Singh Mahinder Singh
Balbir Singh Mahinder Singh
EJEaster Joseph
Easter Joseph
MSMohamed Shuaib
Mohamed Shuaib
RBRobabeh Bashiri
Robabeh Bashiri
Polyaniline (PANI)-reduced graphene oxide (rGO) based transparent counter electrodes have been fabricated for dye sensitized solar cells as an alternative to the expensive platinum (Pt) counter electrodes. Here, the graphene oxide (GO) added during the polymerization of PANI will subsequently reduce to rGO. The concentration of graphene oxide (GO) was varied in PANI matrix to optimize the performance of dye solar cell (DSC). With 1% GO addition in PANI, 9.68% current density was increased, consequently, 13.9% photocurrent density was found to be increased as compared to pure PANI. Electrochemical impedance spectroscopy (EIS) disclosed that the incorporation of 1% GO in PANI caused the double-layer capacitance to increase by 10 times compared to pure PANI. This implies that graphene is capable of enhancing the specific surface area and catalytic capacity of PANI. Optical transparency of PANI-1% GO counter electrode was found to be ~67% between the wavelengths of 500 to 600 nm. Such transparency enables the construction of bifacial DSCs. Although the photo conversion efficiency (PCE) of DSC with PANI-1% GO counter electrode is still not comparable to the one with Pt counter electrode but it is sufficient to be considered as the replacement as it exhibits good photovoltaic performance and optical characteristics together with an exceptionally low cost material.

15 February 2023 in Emergent Materials
Verified
Journal Article
Closed access
PDF file
MSMuhammad Umair Shahid
Muhammad Umair Shahid
NMNorani Muti Mohamed
Norani Muti Mohamed
AMAli Samer Muhsan
Ali Samer Muhsan
SZSiti Nur Azella Zaine
Siti Nur Azella Zaine
AYAsfand Yar
Asfand Yar
MHMuhammad Babar Hussain
Muhammad Babar Hussain

1 January 2025 in International Journal of Energy Research
Verified
Journal Article
Open access
MSMuhammad Umair Shahid
Muhammad Umair Shahid
AMAli Samer Muhsan
Ali Samer Muhsan
NMNorani Muti Mohamed
Norani Muti Mohamed
SZSiti Noor Azella Zaine
Siti Noor Azella Zaine
MBMirza Muhammad Adnan Baig
Mirza Muhammad Adnan Baig
HAHafiz Muhammad Uzair Ayub
Hafiz Muhammad Uzair Ayub
Dye‐sensitized solar cells (DSSCs) have been attracted as a real class of building‐integrated photovoltaic (BIPV) owing to its natural controllable color transparency, working ability in diffuse light, and low‐cost fabrication. The low photoconversion efficiency (PCE) is the main obstacle for BIPV market. The bilayered structure based on mesoporous TiO 2 nanoparticles (NPs) along with TiO 2 blocking layer was introduced to obtain high PCE by optimizing the dye adsorption, avoid recombination via direct electrolyte contact, and enhance light‐harvesting ability by providing scattering centers. However, the bilayered structure based on mesoporous TiO 2 network offers inferior charge transfer, thus higher recombination and, consequently, low PCE. In our previous studies, we have developed graphene/TiO 2 blocking layer, graphene/TiO 2 transparent layer, and scattering layer and analyzed individually to improve the electron transport and reduce recombination. In the current work, we have demonstrated the integrated optimized photoelectrode‐based DSSCs via the above‐mentioned previously developed photoelectrode components with Pt and graphene/polyaniline (PANI) cost‐effective counter electrode. Optical property analysis and electrochemical impedance spectroscopy (EIS) have shown that graphene‐modified optimum components of photoelectrode have effectively improved the electron transport and light‐harvesting ability. Electron lifetime, diffusion coefficient, and diffusion length have been increased by ~87%, ~20%, and ~11%, respectively, as compared to control DSSC based on commercial paste. Consequently, 5.94% of PCE was achieved, which is 20% higher than the DSSCs fabricated with commercial pastes. Moreover, DSSCs based on optimized photoelectrode with graphene/PANI counter electrode have shown 4.04% PCE, which is ~70% of the PCE that was achieved with Pt.

24 November 2021 in Coatings
Verified
Journal Article
Open access
PDF file
SZSiti Nur Azella Zaine
Siti Nur Azella Zaine
NMNorani Muti Mohamed
Norani Muti Mohamed
MKMehboob Khatani
Mehboob Khatani
MSMuhammad Umair Shahid
Muhammad Umair Shahid
A dye-sensitized solar cell (DSC) is the third generation of solar technology, utilizing TiO2 nanoparticles with sizes of 20–30 nm as the photoelectrode material. The integration of smaller nanoparticles has the advantage of providing a larger surface area, yet the presence of grain boundaries is inevitable, resulting in a higher probability of electron trapping. This study reports on the improvement of charge transport through the integration of quantum dot (QD) TiO2 with a size of less than 10 nm as the dye absorption photoelectrode layer. The QD TiO2 samples were synthesized through sol–gel and reflux methods in a controlled pH solution without surfactants. The synthesized samples were analyzed using microscopic, diffraction, absorption, as well as spectroscopic analyses. A current–voltage and impedance analysis was used to evaluate the performance of a DSC integrated with synthesized TiO2 as the photoelectrode material. The sample with smaller crystallite structures led to a large surface area and exhibited a higher dye absorption capability. Interestingly, a DSC integrated with QD TiO2 showed a higher steady-state electron density and a lower electron recombination rate. The shallow distribution of the trap state led to an improvement of the electron trapping/de-trapping process between the Fermi level and the conduction band of oxide photoelectrode material, hence improving the lifetime of generated electrons and the overall performance of the DSC.