The dynamic competition between electron generation and recombination was found to be a bottleneck restricting the development of high-performance dye-sensitized solar cells (DSSCs). Introducing a passivation layer on the surface of the TiO2 photoelectrode material plays a crucial role in separating the charge by preventing the recombination of photogenerated electrons with the oxidized species. This study aims to understand in detail the kinetics of the electron recombination process of a DSSC fabricated with a conductive substrate and photoelectrode film, both passivized with a layer of nanocrystalline TiO2. Interestingly, the coating, which acted as a passivation layer, suppressed the back-electron transfer and improved the overall performance of the integrated DSSC. The passivation layer reduced the exposed site of the fluorine-doped tin oxide (FTO)–electrolyte interface, thereby reducing the dark current phenomenon. In addition, the presence of the passivation layer reduced the rate of electron recombination related to the surface state recombination, as well as the trapping/de-trapping phenomenon. The photovoltaic properties of the nanocrystalline-coated DSSC, such as short-circuit current, open-circuit voltage, and fill factor, showed significant improvement compared to the un-coated photoelectrode film. The overall performance efficiency improved by about 22% compared to the un-coated photoelectrode-based DSSC.
In this study, rubber seed shell was used for the production of activated carbon by chemical activation using an ionic liquid, [C4Py][Tf2N] as an activating agent. Sample RSS-IL 800 shows the highest specific surface area of 393.99 m2/g, a total pore volume of 0.206 cm3/g, and a micropore volume of 0.172 cm3/g. The performance of AC samples as an adsorbent for CO2 was also studied using a static volumetric technique evaluated at a temperature of 25 °C and 1 bar pressure. The CO2 adsorption capacity for sample RSS-IL 800 was 2.436 mmol/g, comparable with reported data from the previous study. Results also show that the CO2 adsorption capacity decreased at a higher temperature between 50 and 100 °C and increased at elevated pressure due to its exothermic behavior. The Langmuir model fits the adsorption data well, and the isosteric heat of adsorption proved that the physisorption process and exothermic behavior occur.
The dynamics of competition between kinetic electron generation and recombination have restricted the development of a higher-performance dye-sensitized solar cells (DSSC). The key to minimizing the competition is optimizing the nanostructures and thickness of the photoelectrode film. It has been reported that the optimum thickness of photoelectrode film to achieve high-performance efficiency is about 12–14 µm. In this study, a photoelectrode film, which is approximately 4 µm thinner compared with those previously reported and has improved performance efficiency, was successfully developed by using composite nanoparticles and core-shell structures. The fabricated DSSC shows an enhanced light scattering, improved dye absorption capability, and reduced electron recombination rate despite the thinner photoelectrode film. The synthesized elongated nanoparticle structure provides a larger surface area for anchoring more dye molecules. In addition, the micron-sized core-shell structures with different refractive indexes of the inner and outer material resulted in multiple refractions and closed-loop light confinement. The successful development of a high-performance thin photoelectrode film will lead to material and cost savings.
A dye-sensitized solar cell (DSC) is the third generation of solar technology, utilizing TiO2 nanoparticles with sizes of 20–30 nm as the photoelectrode material. The integration of smaller nanoparticles has the advantage of providing a larger surface area, yet the presence of grain boundaries is inevitable, resulting in a higher probability of electron trapping. This study reports on the improvement of charge transport through the integration of quantum dot (QD) TiO2 with a size of less than 10 nm as the dye absorption photoelectrode layer. The QD TiO2 samples were synthesized through sol–gel and reflux methods in a controlled pH solution without surfactants. The synthesized samples were analyzed using microscopic, diffraction, absorption, as well as spectroscopic analyses. A current–voltage and impedance analysis was used to evaluate the performance of a DSC integrated with synthesized TiO2 as the photoelectrode material. The sample with smaller crystallite structures led to a large surface area and exhibited a higher dye absorption capability. Interestingly, a DSC integrated with QD TiO2 showed a higher steady-state electron density and a lower electron recombination rate. The shallow distribution of the trap state led to an improvement of the electron trapping/de-trapping process between the Fermi level and the conduction band of oxide photoelectrode material, hence improving the lifetime of generated electrons and the overall performance of the DSC.