Li Wang

Dr. Li Wang

School of Electronics and Information Engineering, Xi’an Jiaotong University

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 May 2022 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
Li WangLi Wang
Li Wang
Xiue BaoXiue Bao
Xiue Bao
YWYafei Wang
Yafei Wang
Sen YANSen YAN
Sen YAN
AZAnxue Zhang
Anxue Zhang
This letter proposes a novel inexpensive microwave ablation (MWA) antenna with a highly localized ablation zone. The antenna is designed based on a substrate integrated coaxial line, at the end of which a serpentine structure is used to radiate microwave power. The serpentine structure can effectively shorten the length of the radiation structure, making the ablation zone more localized. Due to its simple structure, a convenient and inexpensive printed circuit board technology can be used to fabricate the disposable ablation probe. In addition, the proposed topology has a small cross section and, thus, is very suitable for minimally invasive surgery. Simulation analysis and validation experiments have shown that the proposed MWA antenna can provide reliable performance, which means that it can serve as a promising candidate for minimally invasive ablation therapy.

26 January 2022 in Electronics
Verified
Journal Article
Open access
PDF file
Xiue BaoXiue Bao
Xiue Bao
Li WangLi Wang
Li Wang
ZWZeyu Wang
Zeyu Wang
JZJiabei Zhang
Jiabei Zhang
MZMeng Zhang
Meng Zhang
AZAnxue Zhang
Anxue Zhang
Accurate permittivity characterization has attracted a lot of attention in various areas. Resonant characterization methods are well-known for their accuracy, but they are restricted in very narrow frequency ranges, and thus, they are normally not recommended to be used for dispersive or high-loss materials. Transmission line characterization techniques are outstanding for being inexpensive, accurate, and broadband, but the algorithms are often complex to perform. This paper proposes a fast, simple, and accurate broadband permittivity characterization algorithm, which is mainly suitable for millimeter-wave applications. It combines a general line–line method and a closed-form algorithm, extracting the complex permittivity of the material under test (MUT) without the need for calculating any intermediate parameters. Validation measurements on de-ionized water in the frequency range from 140 to 220 GHz are in very good agreement with the literature data, which successfully indicates that the proposed algorithm is reliable and accurate for millimeter wave permittivity characterization.

25 January 2023 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
Li WangLi Wang
Li Wang
Xiue BaoXiue Bao
Xiue Bao
CLChangbin Liu
Changbin Liu
YWYafei Wang
Yafei Wang
Liming SiLiming Si
Liming Si
AZAnxue Zhang
Anxue Zhang
Though microwave ablation (MWA) technology has shown obvious advantages, it has the problem that the ablation zone is not sufficiently localized. As a result, normal tissue might be inevitably damaged during the ablation process. To solve this problem, the comprehensive MWA theory is first analyzed in this article, and then, a frequency-adaptive ablation approach is proposed and verified by simulations. Accordingly, a frequency-adaptive MWA system for optimizing the ablation zone is developed. As the tissue’s electromagnetic properties change with the increase in temperature during the ablation, the proposed system is designed to monitor the working performance of the antenna in real time and to automatically select the optimum working frequency, simultaneously. The ablation-controlling system is designed as an integrated controller so that the overall size and fabrication cost are obviously reduced. Preliminary validation experiments are performed on the system, which shows that the proposed system is capable of delivering stable power output from 0.5 to 3 GHz and creating a highly localized ablation zone. The proposed MWA system is expected to be a dedicated device for the treatment of tumors.

30 April 2024 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
Li WangLi Wang
Li Wang
Xiue BaoXiue Bao
Xiue Bao
CLChangbin Liu
Changbin Liu
WYWenchao Yan
Wenchao Yan
BJBici Jiang
Bici Jiang
AZAnxue Zhang
Anxue Zhang
In this article, a compact time-domain (TD) microwave system for borehole radar (BHR) is developed based on cost-effective microwave hardware. The time-varying gain equivalent sampling (TVGES) technique is proposed in the receiver, which consequently achieves an equivalent sampling rate of up to 33.3 GSa/s and a bandwidth of 618 MHz, enabling undistorted sampling of ultrawideband (UWB) pulse signals. Additionally, other components including pulse generator, antennas, and control circuits are purposely designed, and finally the complete system is integrated into a 120-cm-long polyvinyl chloride (PVC) pipe with a small diameter of 5.2 cm. The prototype can be operated with a portable android device (PAD) using a customized Ethernet cable, through Wi-Fi, or just working offline. Due to the proposed TVGES technique, the system is able to suppress disturbing early-arriving waveforms while effectively enhancing the reflections from targets. The performance of the developed system is evaluated for various measurement scenarios, especially by comparing with a measurement setup without TVGES. It shows that the TVGES-based system has a dynamic range of 61 dB and a signal-to-noise ratio (SNR) of up to 40 dB, and it can improve the SNR of late-arriving reflections by about 13 dB. To verify the proposed TD microwave BHR system, preliminary experiments are conducted, which show that the system can successfully detect a small target that is placed 0.4 m away from the BHR.

26 September 2023 in IEEE Access
Verified
Journal Article
Open access
HYHaoyun Yuan
Haoyun Yuan
ZLZhuangzhuang Liu
Zhuangzhuang Liu
Li WangLi Wang
Li Wang
Liming SiLiming Si
Liming Si
HSHoujun Sun
Houjun Sun
Xiue BaoXiue Bao
Xiue Bao
A novel three-dimensional (3-D)-printed wideband circularly-polarized (CP) waveguide based 4 × 4 slotted antenna array is proposed for wireless communications in the paper. For radiating CP waves, several additional eigenmodes are introduced by designing several additional layers. By adjusting the multiple resonances within the cavity, the axial ratio (AR) bandwidth can be enhanced, and the impedance matching can be improved. Due to the good AR performance of the well-designed radiation subarray, the antenna scale can be easily extended by a simple full-corporate-feed network. The multilayered antenna array is fabricated using the cost-effective commercial direct metal laser sintering (DMLS) technology. By incorporating the Huray model, this study considers and simulates the influence of roughness. The antenna has a measured impedance bandwidth of 20.4% (18-22.1 GHz), which is exactly the same as its AR bandwidth. A maximum gain of 21.6 dBic is achieved at 21.3 GHz. It has validated that, compared with state-of-art technologies, the proposed antenna has wide bandwidth and good radiation pattern. The developed antenna shows competitive performance in terms of gain and efficiency with the state-of-the-art antennas. This demonstrates the viability of employing the advanced 3-D printing technique for realizing complex microwave structures, which holds high potential for future wireless communication applications.

2 August 2024 in International Journal of Remote Sensing
Verified
Journal Article
Closed access
Li WangLi Wang
Li Wang
Xiue BaoXiue Bao
Xiue Bao
XTXiaochao Tian
Xiaochao Tian
Giovanni CrupiGiovanni Crupi
Giovanni Crupi
Liming SiLiming Si
Liming Si
AZAnxue Zhang
Anxue Zhang