ReaxFF-lg molecular dynamics method was employed to simulate the decomposition processes of IHEM−1 nanoparticles at high temperatures. The findings indicate that the initial decomposition paths of the nanoparticles with different sizes at varying temperatures are similar, where the bimolecular polymerization reaction occurred first. Particle size has little effect on the initial decomposition pathway, whereas there are differences in the numbers of the species during the decomposition and their evolution trends. The formation of the hydroxyl radicals is the dominant decomposition mechanism with the highest reaction frequency. The degradation rate of the IHEM−1 molecules gradually increases with the increasing temperature. The IHEM−1 nanoparticles with smaller sizes exhibit greater decomposition rate constants. The activation energies for the decomposition are lower than the reported experimental values of bulk explosives, which suggests a higher sensitivity.
The development of lithium-ion batteries necessitates cathode materials that possess excellent mechanical and thermal properties in addition to electrochemical performance. As a prominent functional ceramic, the properties of spinel LiMn2O4 are governed by its atomic-level structure. This study systematically investigates the impact of Ni doping concentration on the mechanical and thermal properties of spinel LiNixMn2−xO4 via first-principles calculations combined with the bond valence model. The results suggest that when x = 0.25, the LiNixMn2−xO4 shows excellent mechanical properties, including a high bulk modulus and hardness, due to the favorable ratio of bond valence to bonds length in octahedra. Furthermore, this optimized composition shows a lower thermal expansion coefficient. Additionally, Ni doping concentration has a very minimal influence on the maximum tolerable temperature of the cathode material during rapid heating. Therefore, from the perspective of mechanical and thermal properties, this composition could be beneficial for improving the cycling life of the battery, since comparatively inferior mechanical properties and a higher thermal expansion coefficient make it prone to microcrack formation during charge–discharge cycles.
This study used reactive molecular dynamics (RMD) simulations to systematically investigate the thermal decomposition characteristics of Al-coated CL-20-based cocrystal explosive (CL-20/BTF@Al and CL-20/TNT@Al) nanoparticles at 2500 K, revealing how metallic Al exerts regulatory effects on the thermal decomposition mechanisms of energetic materials compared with the pure CL-20-based cocrystal system. The results indicate that the Al-coated structure could create a large number of local high-temperature hotspots in the system, providing active sites to initiate reactions, while slowing down heat loss and increasing the system temperature. The evolution of thermal decomposition products indicates significant differences between the Al-coated systems and the pure cocrystal systems, confirming that Al effectively regulates the thermal decomposition pathway. Atomic diffusion analysis shows that the exothermic reaction of Al promotes the decomposition of intermediates, increases the content of small molecules containing free H and N, and thereby enhances the diffusion coefficients of H and N atoms. In addition, Al combines with O to form stable clusters, which adsorb bound carbon fragments at their interfaces, significantly inhibiting the migration and diffusion of C and O atoms, thereby reducing their diffusion coefficients. This work clarifies the microscopic thermal reaction mechanism of metal/energetic composites from an atomic-scale perspective, and lays an essential theoretical foundation for component formulation and performance optimization of high-efficiency energetic composites.